Pages:
Author

Topic: (hacked) S7LN Group Buy - page 7. (Read 15179 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
June 16, 2016, 11:17:16 AM
#36
Do you happen to have a need for that Enermax 1000W which comes with the S7-LN?
I was wondering if it would be possible to buy one without the PSU, since I would have a 500W Super Flower ready for this.
I'm thinking about putting the S1 "to sleep".
Also, how much would it be with shipping to Finland?

Thanks,

-Hagss

If you want sidehack can send 2 to me.

One for you and one for me.   

He can send it with the psu I would keep the psu and use it towards  the shipping cost to Finland.

So would would pay normal price  same as me with a small premium over the psu to ship it to Finland.

I could repack it in a lighter box since it won't have the psu.

It is sidehack's group buy, but I don't mind  doing this for you. As I have shipped to you before.

@sidehack let us know if it is a good idea for you.

Best regards phil.
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
June 16, 2016, 08:58:38 AM
#35
Do you happen to have a need for that Enermax 1000W which comes with the S7-LN?
I was wondering if it would be possible to buy one without the PSU, since I would have a 500W Super Flower ready for this.
I'm thinking about putting the S1 "to sleep".
Also, how much would it be with shipping to Finland?

Thanks,

-Hagss
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 16, 2016, 08:49:23 AM
#34
Some of the transactions I sent out yesterday hadn't even shown up on Blockchain.info inside an hour, let alone confirmed. Ridiculous.

Also, looks like I got an order through finally. So Round 1 oughtta be getting here in a couple days.
legendary
Activity: 1260
Merit: 1009
June 16, 2016, 06:27:39 AM
#33
The Network is slightly improved; down to 10k average unconfirmed transactions from 30k average yesterday.  However, in this case I blame Bitmain for using a blockchain.info wallet, and blockchain.info for having considerable service issues yesterday.  IMO they should be able to properly scale their services as needed; they aren't a new company and there are open source solutions.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
June 16, 2016, 06:19:54 AM
#32
I have at least one wallet client open at all times. Additionally, and this is my formal opinion - daytraders and altcoiners can piss off forever.

Well I am not a big day trader fan,but we need a few altcoins.

I am a BTC is the highway and ETH is a taxi or truck on the highway guy.  I think it is a good model.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 16, 2016, 02:14:21 AM
#31
I have at least one wallet client open at all times. Additionally, and this is my formal opinion - daytraders and altcoiners can piss off forever.
member
Activity: 124
Merit: 15
June 16, 2016, 02:10:55 AM
#30
I read somewhere on here, maybe the armory section, about getting transactions confirmed, that is helps to leave a hardware wallet open until the first confirmation.  While wallet is running it will continue to broadcast the transaction which sometimes speeds it getting processed and confirmed into the blockchain.  It seems just as bad late at night with everyone converting eth to bitcoin, so daytraders hog it during day and altcoin dumps from across the globe fill the rest.  One would think miners should have a say, too bad we can't point our own miners to specific blocks to speed things up.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 15, 2016, 10:46:12 PM
#29
Seriously though, whatever happened to upping the block size limit? Wasn't that a massive stink for months?
sr. member
Activity: 358
Merit: 255
June 15, 2016, 10:44:07 PM
#28
Its will soon be the fee chain. I can't send or receive any mined coins at the moment.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 15, 2016, 09:59:30 PM
#27
I just wish the jackass day traders would save some transaction headroom for people actually wanting to use bitcoins as a means of exchange for goods and services. You know, like a currency.

Also, eff this. I'm going out to the shop and place the order a THIRD time and if I have to hang out there until lunchtime tomorrow I'll get the transaction confirmed. This is retarded. Y'all are waiting for something and you're gonna get it.


EDIT - coin being where it is, as of right now the price is back down to 0.59BTC per unit. We'll see if coin stays high.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
June 15, 2016, 09:54:47 PM
#26
yeah network is going crazy  the 741 it got to was a two year 3 month high.


legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 15, 2016, 09:42:26 PM
#25
Well apparently the network hates me. I scrapped the original order, put in a new transaction with a full order magnitude higher fee and it's still unconfirmed five hours later. So I guess that order's timed out and cancelled. I'll have to hit it again when I get to the shop in the morning. Maybe I'll step the fee up to about ten bucks this time, that should get someone's attention. If that doesn't work, we'll go freakin' fifty.

I've been out since about 4PM so I haven't checked on prices. Last I saw coin, it was still below where I priced things out initially. Guess it's gone up since then.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
June 15, 2016, 09:25:41 PM
#24
What is status on group buy?

coins shot up a lot.  I got so busy with

 the s-9 install

 the avalon 6 sales

the s-7 sale  yesterday and then tearing down my kitchen tthe studs for a makeover   that I never put in for a unit.

So did  sale go through on the resend?

and what would be price with coins  now at 730?


legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 15, 2016, 09:12:07 AM
#23
...or, at least I would have placed an order, if that transaction would ever confirm. This has been a bad month for me and transactions. I've got a June 1st invoice that's been pushed twice and hasn't confirmed yet, and one of the guys for this GB has a transaction in limbo somewhere. Kinda freakin' me out.

EDIT - order has been resubmitted with a fresh transaction on much higher fees. Hopefully it gets confirmed this time and we can get to business.
I've got my miner decently characterized between 720mV and 660mV and will continue the numbers tomorrow.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 14, 2016, 09:26:37 PM
#22
I was talking about someone else.
sr. member
Activity: 475
Merit: 265
Ooh La La, C'est Zoom!
June 14, 2016, 09:17:44 PM
#21
another transaction pending

Just sent an updated PM.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
June 14, 2016, 06:05:14 PM
#20
I've placed the first order with Bitmain for the first 6 units. I used some of the tip money from early on to pick up a seventh machine, so I'll have an extra in case something goes weird. I currently have two more orders paid, another transaction pending and at least one other guy waiting for coins to come in, so there will be a second round in a few days.

I think I'm gonna adjust the price to 0.61BTC on account of coin was very strong yesterday when I bid the order, and now a miner plus shipping is a shade over 0.53 instead of 0.51BTC. If you've already paid, no matter, but if you're placing an order in the next 24 hours the price is 0.61BTC. If coin goes back up to yesterday levels, or the price goes down from Bitmain, I'll adjust again.
member
Activity: 82
Merit: 10
June 14, 2016, 04:11:11 PM
#19
I'm in for one! Just sent payment and a PM with a signed message.
sr. member
Activity: 338
Merit: 250
June 14, 2016, 02:25:39 PM
#18
If there are any newbies to signing a message like me, after over an hour online searching I found that the problem was I have upgraded to the new online BlockChain wallet (and when trying to login to the legacy wallet it jumps to the new sign in only) which is laid out completely different than the legacy wallet (no receive money button, if you click on receive then you get a pop up window..., you have to go to settings and click on address, etc).  Most of the online tutorials are made for the old wallet, so I'm posting this here for anyone else that might need this info.

https://bitcointalksearch.org/topic/guide-how-to-signverify-message-in-new-blockchain-wallet-1467458
legendary
Activity: 1260
Merit: 1009
June 14, 2016, 12:22:27 PM
#17
I sent from 1NLyuEbgfA5XAYsaDMQy7LFL45nbzmCNL6: tx c021eaceaea2e9040687f10e4ee97a76abb1bd90e20d01f3368d6cdfadbef55a

I just sent you a pm with a signed message.
Pages:
Jump to: