Topic: Hacking a BFL Single/25 to 48gh and beyond..... (Read 8423 times)

So anyway a quick update: I installed 7 more chips on my other single/30 a few weeks ago, ran well at 56gh overall. However last weekend I powered it down and it came up with only one side.

Turns out the 1850 chip wasn't working right, so I pulled it and replaced it. Now one set of FETs is working, but the other is not. Enough to keep the board hashing with a fan pointed at the running FETs but still kind of odd.

And I have another single board that has one side down. At first I thought the problem was the 1850 and swapped it, but sure enough 0 volts. Then I found the FETs were shorted and replaced half of them. Then I checked the caps and found one of them (the one between vcc and ground) was shorted, which was shutting down the chip. Pulled the cap and the board is coming up but only at .6 volts, which is kind of odd.

Just got a new set of FETs in, will replace this weekend and see what happens. It would be nice to get the other 30gh running on this board.

Never dull, always fun.

thank you I ordered 10 for 16 usd including fedex shipping

What country are you in?  Have you tried Mouser?

http://www.mouser.com/ProductDetail/Texas-Instruments/CSD16404Q5A/?qs=%2fha2pyFadugSnQ10j0BuekvPf4xb1xPwdHGhkVkF47c%3d

My unit has IOR mosfets on it instead of the 010NE2LI ones, unfortunately I am out of town for the weekend, so cannot get you the info on them at the moment.

Yes Q3 is damaged and need replacement any idea where i can buy this FET?

CSD16404 = 7030L

Q3 in that center photo looks a bit cooked.  Hope the board/pad under it is not damaged!

Thanks for the datasheet links.

here closeups of the FET which can blow so easy:







now I have to source them, bfl wants the whole box sent to them, not just the board, what a waste of energy.
I see 2 typ of FET :
CSD16404 TI 38E MF3X 3E http://www.rom.by/files/CSD16404.pdf
and
010NE2LI HSA335 http://www.infineon.com/dgdl/BSC010NE2LSI_rev2.2.pdf?folderId=db3a304313b8b5a60113cee8763b02d7&fileId=db3a30433072cd8f01308d8d1cdf33de

and here is FET of 5gh single bfl: left side is 7030L FET maybe same as CSD16404

Not sure I understand what you're asking? When you factor in shipping and such though it might be cheaper to do it locally.

C

how much for you to supply everything and send to UK a 48gh rig?

cheers

zCz

First, I would read the numbers off all six, post them, then remove them. They sometimes used different parts.

Then I would try powering it up *BUT NOT MINING ANYTHING*. The other three FETs shuould be enough to power up the chips (note they will fail on mining) but what you need to see is if there is 1 volt between that pad over on the right and ground.

If not, the driver chip is also blown and this becomes harder. If it does show 1 volt shut down immediately and order the FETs. Remember, they have solder on their backs that attach to the board so you have to heat the whole chip not just the um. pins on the ends.

C

I have shorted power rail and soon with help of this will get my bfl50 working again

here is picture of shorted FET bfl single 50 , see the burnt brown thing, luckily I did not try other psu like so many others causing more damage.



who sells those FET and what type are they , name? tnx

Interesting: I don't like the Corsair 750m as much as the 500. Although it does have more power without a doubt, the ribbon cables it uses are really kind of undersized in terms of wire gauge. There are "four" PCIe plugs, but two of them are on the end of each ribbon cable, and the gauge of the wire going to them both is a bit smaller than the gauge of the 500's single plug. Result is what's the frigging point?

Right now I have a 48gh single running on one side, and a 32gh single+35gh chili running on the other. The second wire is getting a bit warm going back to the power supply, which of course means overload and *inefficiency*. And although I can run one 24gh overclocked jally on a 12 volt line, I can't run the 20gh jally on the same line, different plug because *it* gets a bit warm.

Drat. So if you're looking for power supplies, 2 500 watt units are going to be better than a 750 in more ways than one.

C

Just got the 750. The 500 was not happy; things are much more merry on a 750 watt unit. And I now have more room for some more singles.

Other than that everything is working fine. Still a solid 48gh, that one I fixed is at a solid 31, just keeping an eye out for some chips to boost it to 60.

12v x 38a = 456w

Single Rail but only push to 30a to keep it safe.

not rated for 24/7 full load, the rail amps available are "Surge" specs.

38a surge 30a 24/7

If you want bulletproof PS then follow this thread, cheap too. pennies on the dollar for old server P/S.

https://bitcointalksearch.org/topic/server-power-supply-interface-board-for-standalone-miners-and-gpu-rigs-379677

No more soldering for the tool less, put the toy PSs back into the game boxes.

here are some examples, 12v 60a 90+ efficient:
https://www.google.com/#q=Z750P-00

Funny that you are writing about using a CX500; I was just commenting on a post about the 12v available amps and this happened to be the second post I ran across! Out of curiosity what A does your CX500 say for your 12v line?

Interesting thing to note: Last night my 32gh Jalapeno blew up it's power supply (a crummy 300 watt ATX one from Ebay, $20) so I put it on my CX500 along with a high power burning Chili and the 48gh single. The single dropped off line this afternoon and went to zero gh hash rate, which was very odd. So I moved the 20gh unit onto the the CX500, moved the Jally to the other CX500 and now everything is stable.

So it does appear that power supply issues (yes, the 500 watt Corsair was overloaded) can cause oddball issues. I just ordered a 750 watt Corsair to come by Friday, that will fix the problem long term:

Also note that crappy power supplies are not worth it for miners.

C

Sell them to me.  I might donate one for lightfoot to tear apart.

This single is really interesting. It's an early October model, hashes at a solid 32gh which means it is hitting the 30gh limiter in the software which means A grade chips. The heat sink is the good copper type and is secured to the chips with a glue so strong I am not trying to remove it. It's super stuck on there, so I'm leaving that alone forever.

The odd thing is it has only one fan connector, no sinks on the bottom other than the bottom heat sink, and only one fan that the DPO replaced with a "quiet fan" that doesn't move air for crap. Temps were at 80c, which was hot.

So.... I got a fan with two broken blades from my box of crap, put it on the unit with standoffs from all my now parted jallies, and put a 40 ohm resistor in series with the inside fan so the darn thing wouldn't vibrate too much. Best I can do. Seems to be in the 60's now, will let it hash for awhile.

However it really needs two fan ports. Well, four. And a second fan, and 6 more power control chips, and a power chip, and parts from my other non-working jally, and six more chips....... :-)

I'll work on that. Soon.

C

Well, got the chipmunk single today, interesting little thing. It seems to be an October generation single/30, has the really good heat sink, and no fan on it. Just one fan on the end that the guy replaced with some "quiet" fan which means less cooling.

Anyway yes, it does have a hole in the side, looks like an iceberg. And yes, it would not work when plugged into a computer, no recognition, no FT_PROG access, zilch. Dead chip, right?

Wrong.

If there's one thing I learned from Atlas Shrugged, aside from the fact that sex can be boring, icky and kind of rape-creepy it's the words of Atkison, who said "Check your premises". So I looked at the cable (mine, fine), then looked at the USB port. And found that the USB port was a tangle of wires inside, looks like it somehow ripped itself apart.

That would do it.

So I went to my junker jalapeno board, heated it up on the preheater, 375F for 5 mins, then 400c for 30 seconds to float off it's USB port. Did the same on the bad board, put the replacement port on, 45 seconds of heat at 400 after preheat and gentle pressure on the back, and....

Up it came. Hashed at 32gh at 75C which is kinda hot for a single. I'll find an old fan and put one on for the moment while I figure something else out.

I really think though that I could fix a rainy day... It's never dull. But now I have space for 8 more chips. Well, 6 more. But getting there....

C

What kind of cooling are you doing on it? And whats the max you have hit so far? I am really interested in this overclock because i think its worthless to power up my Single