Topic: Hash-Kings Profit Switching / Custom Coin Miner 1.15.3.0 - page 9. (Read 7032 times)

The skunk spike was cause by the zpool api, looks like they were using a exchange that had a HUGE spike in the price of MUN and that shot the estimated earning way up then the exchange went offline and all coins went to a 0 value so now we have to disable skunk until the API settles back to were it should be.

I don't control the source of our API data but i can start on V4 of my caching api to check for these spikes later today.

I disabled Skunk mining, Payout rate was wrong at 5k$+/ day. Mining all night for penny.
Now mining Blake2s. This rig is running 1.9.0.2 with 6x GTX1060 6GB, issue is probably fixed in 1.9.0.3 ?

My 2x RX480 crashed last night on 19.0.1.3.
RIG is 1 year + , mining super stable since last year but may show aging issues.

Typically need to hard reboot to recover missing GPU, soft reboot isn't enough ...
I changed driver and mining software at same time...
Need to investigate if it's hardware related or not.
Mining is lot's of fun 

Thanks !

Those using AhashMiner
This notice was just released on their site doublecheck your worker settings.

Benchmark 1 card then right click all the others and copy from the first GPU

This is because we use normalization so that we do not lose money switching to a coin that has a short spike then by the time it's exchanged it's less that what you would have made on another algo.

Download the release and not the source

How to install or run zPoolMiner Versions 1.9.0.3, absent zPoolMiner.exe (is present zPoolMiner.csproj)?

I have give up this GUI,no use for me.
it will not change another coin when I run a few hours.

Benchmark 1 GPU and cut and paste results to other GPU files in configs folder

I try to use .
But why my 6X1080ti must to benchmark for 6 times？ all the same card。

Hi，thanks for your works，
I want to know if is the miners take 1-2% dev，and your GUI take additional 1-2%？
finally pools take 1-2%，hard life i feel~~

I'm running smooth with adrenalin 18.1.1 and Win 7 64bits with 2x RX480 8GB

I recommend those drivers as they are what I use for testing on RX 470 4GB cards however for more than a 8 Card rig they do not work correctly.

What version of drivers did you upgrade to as i would be willing to give them a test.

Work great and I enjoy daily low fee LTC payout  

One comment :

Discard using recommended Blockchain Driver, didn't work.
I had some issues with my RX480 rig. I fixed with a drivers update.

AMD RX, R7, R9, Redeon HD - Recommend the Blockchain Driver
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx


Running 1.9.0.2 ATM, I will update tomorrow
Thank you for developing this tool.  

Ahash only supports BTC payouts

Announcements:

Just cleared the first $40 day with zPoolMiner, Thank you all so much for your support. We are 40% of the way to the first of hopefully many DevFee reductions in only a months time.

AhashMiner 1.9.0.3 has been released.
zPoolMiner 1.9.0.3 Has been released.
A more robust API has gone Live.

AhashMiner 1.9.0.3 is available at : https://github.com/Cryptominer937/zPoolMiner/releases/tag/Ahash-1.9.0.3
to copy benchmarks from zpoolminer
1. Make sure the zPoolMiner is in the folder called zPoolMiner on your desktop
2. Install AhashMiner
3. Open AhashMiner & after bin downloads close it
4. run AhashGUIMiner Benchmark Copier
5. Re-launch AhashMiner and there should be minimal benchmarking required.


zPoolMiner 1.9.0.3 is available at : https://github.com/Cryptominer937/zPoolMiner/releases/tag/1.9.0.3

to Upgrade
1. Copy your benchmark_GPU files from the configs folder
2. Install the new zPoolMiner
3. Run zPoolMiner and download all Bins.
4. Close zPoolMiner
5. Copy your saved benchmark_GPU files into the new configs folder overwriting the ones created by default

This will minimize Required Benchmarking and Yes I will automate it in a future release.

Changes: Addition of Palgin_HSR for HSR

Fixes: 20-30 tiny bugs.


Unfortunately I have had to make the decision to not keep the Github fully up-to date as we have had people starting to release a versions with the devfee ripped out when there is already a command line argument that can be used to disable it. (Don't ask me for it as you will have to find it inside the code that is available on GitHub.) Github will still be updated but it will remain one full major revision behind. I am doing this so that people are not inserting malicious code into what I have done so far. Will provide source to well respected members of the community if anyone wants my code inspected. 

is ahaspool support ltc payments or only btc?

do you make miningpoolhub version to?

The blake2S, phi pools randomly gets stuck in a low vardiff state so many have chosen to disable them as a low vardiff means less submitted shares.

can you explain? Is it not actually more profitable when exchanging to btc?


I disabled hsrneoscrypt because it would end up at 0.000MH/s and basically stall.

Yeah it's good to use, but I deactivated blake2s, I mean it shows that it is the most profitable rn, but its like only mining Blakestar/shield which isn't really worth much compared to verge

Goal for Today.
Version for AHashpool.com
Setup VPS for API caching
Build V3 of my API Cache.