Author

Topic: HashFast announces specs for new ASIC: 400GH/s - page 151. (Read 880461 times)

sr. member
Activity: 434
Merit: 250
I think HF may need to retract that 'most powerful ASIC' statement: isn't this using a more powerul chip: http://btcolympus.com ?
and one of their customers with a working unit: https://bitcointalksearch.org/topic/--7216
legendary
Activity: 1904
Merit: 1007
Quote
Who is Cypher Enterprises? The name reminds me of cypherdoc and that's so funny...
It's a group buy:
https://bitcointalksearch.org/topic/m.5945363
Posted from Bitcointa.lk - #RgddbJ0yHRf5Aa6q

Very well played until now. Hope it works out ok for them and for every customer.
legendary
Activity: 1176
Merit: 1001
Quote
Who is Cypher Enterprises? The name reminds me of cypherdoc and that's so funny...
It's a group buy:
https://bitcointalksearch.org/topic/m.5945363
Posted from Bitcointa.lk - #RgddbJ0yHRf5Aa6q
legendary
Activity: 1904
Merit: 1007
ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.     Their issues are that they cant build boards fast enough, or they dont know how to properly design a power regulator, or they cant cool the chip they designed.

Thank you cedivad for pointing this. Somehow i didn't even read it the first time. All i can say is WOW. You are a tard troll from my point of view after reading this. So KnC announces that they will have a 10 MW datacenter ready in a few months and you are telling us that "ALL" companies have chips doing nothing and that they can't build boards fast enough? O'RLY??? How does this picture look to you? So sick of dumbfucks who can't even do a little research before talking out of their ass...




Edit:
EXTRA EXTRA Read all about it, Court freeze's hashfast's Wallet, http://www.coindesk.com/court-grants-order-freeze-hashfasts-bitcoin-wallets/
Who is Cypher Enterprises? The name reminds me of cypherdoc and that's so funny...
legendary
Activity: 1630
Merit: 1000
EXTRA EXTRA Read all about it, Court freeze's hashfast's Wallet, http://www.coindesk.com/court-grants-order-freeze-hashfasts-bitcoin-wallets/
legendary
Activity: 1120
Merit: 1002
http://digitaljournal.com/pr/1819167

Deans & Lyons Lawyers Obtain a TRO against HashFast Technologies, "Freezing" its Bitcoin Wallets
Posted from Bitcointa.lk - #EiSnJ07GtWCWlpdE
WAWW !  Grin he he he  Cheesy
legendary
Activity: 1176
Merit: 1001
you are just talking out of your ass
S M I L Y.

It doesn't really take a lot to detect people with an interest/trollers of this thread. Just take his first line:
>As someone who has been in hardware development for many years,

And uses this authority to state that:
>ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.

In order to defend the criminal actions HF is committing by gifting ASICs away in an unfair distribution.
Posted from Bitcointa.lk - #xy3JN5d368Fe1WG9
legendary
Activity: 1904
Merit: 1007
As someone who has been in hardware development for many years, EVERY bitcoin ASIC vendor has mainly had issues with the Board design, and Thermals/Mechanicals.

Once the chip design is done, its real easy to call the Chip FAB up and ask for chips...

KNC -  Ran out of VR modules because they bought an off the shelf part.  Then had Capacitors catch fire probably due to not spec for enough ripple current.


Proof? KnC never ran out of VR modules. They even put more than needed on the first boards just to be sure nothing goes wrong. Yes they had some capacitors catch fire but i don't think it was for more than 20 customers which is ~5.5% out of 3600 Jupiters. But the units are stable as fuck. The other vendors hardware, even if they didn't had problems with components catching fire, they weren't so stable or they just died. So i'm waiting for proof for the statement that KnC ran out of VR modules otherwise it means that you are just talking out of your ass.
legendary
Activity: 1176
Merit: 1001
KnC finished their PCB design and had the PCB in hand ready for functional, power and thermal testing 5 weeks before their packaged ASIC chips arrived.

And so did CT. HF? Fucking December.
Posted from Bitcointa.lk - #Csni6lo5DCY6ucDF
legendary
Activity: 1176
Merit: 1001
ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.     Their issues are that they cant build boards fast enough, or they dont know how to properly design a power regulator, or they cant cool the chip they designed.
How not. Enough to gift a "few thousands" of them to Garret and possibly someone else (or many others).
Posted from Bitcointa.lk - #fg1EpQ3AD1udhDmz
full member
Activity: 185
Merit: 100
As someone who has been in hardware development for many years, EVERY bitcoin ASIC vendor has mainly had issues with the Board design, and Thermals/Mechanicals.

Once the chip design is done, its real easy to call the Chip FAB up and ask for chips...

HashFast - Original board VS Yoli 70% more performance with just a board change
KNC -  Ran out of VR modules because they bought an off the shelf part.  Then had Capacitors catch fire probably due to not spec for enough ripple current.
BFL-  Yea... Everything.  missed their power budget by 5x  
Cointerra-  Very complex board with heavy components on the backside.  cant be build fast.   Their issues are probably signal integrity and power related which explains the way less than 2Th.
Avalon-  Dont even want to talk about their problems.   Im still pissed.

ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.     Their issues are that they cant build boards fast enough, or they dont know how to properly design a power regulator, or they cant cool the chip they designed.


-Smily


I don't have time to read up on the other companies, but you are wrong to compare KnC to HashFast.  KnC finished their PCB design and had the PCB in hand ready for functional, power and thermal testing 5 weeks before their packaged ASIC chips arrived.  Yes, later on they encountered a shortage of the GE DC/DC power modules (they bought the entire global supply), but they came up with a good solution thanks to their over-engineering.  And that solution did not involved delaying shipment for months unlike HashFast.  MrTeal allured to possible supply chain issue with Hashfast, but who know if that's really the truth or if anything HF had ever said was true.  Regardless, I wonder what were they doing while they were waiting for their ASIC to arrive?  When did they came up with the PCB design, tested it and mass-produced it?  When the chip finally arrived?

 
https://www.kncminer.com/news/news-30
Getting Closer
8/21/2013
3:20:00 PM
 
Today we have our PCB’s back from the assembly house. These boards will each contain one ASIC chip and be individually connected to the main controller board. The Chip in the picture below is an FPGA which we are using to emulate the full functionality of the boards.
 
The entire space you can see in the middle of the  DC/DC modules (GE Critical Power DC/DC CONVERTER 0.45-2V 40A SMD)  will be consumed by our ASIC.  
 
We would also like to share some facts about our boards with you.
 
  • The DC/DC modules we have on our boards are the largest and best quality available from GE Critical Power. Each capable of 40 amps making the max available 320 amps per ASIC
  • Our PCB laminat is not standard either. It has been given extra thick copper layers and multiple power and ground plains which enable it to more than handle our requirements.
  • We will be using these boards to fully validate the entire setup. They will consume the same power, make the same noise level, produce the same heat and run the same RTL code. The only difference will be related to hashing.



We would also like to take this opportunity to explain our design philosophy.
 
Our entire design strategy is based on time to market, We have as you can see over specified the PCB by quite some way, our ASIC will only consume an absolute maximum of 250 watts and we know the PCB can cope with 320  watts. This is the level of design margins we employ.
 
So you can use the following to see how safe our design is.

  • We have used a VERY large package for our die, not because our die is large, but to make sure we can handle the power and heat requirements.
  • We have used more DC/DC modules than strictly necessary
  • We have used the most pessimistic/conservative estimates in all of our simulations. Including but not limited to Yield, Performance, Power and Heat  
  • For example while testing each part of the chain. We have tested our onboard Linux device to make sure it can handle up to 1.2TH ( The controller board also has and expansion for additional linux devices for future upgrade/ second generation)
hero member
Activity: 761
Merit: 500
Mine Silent, Mine Deep
Meanwhile, at least 650TH of new capacity is added to the Bitcoin network every single day.

MPP in June/July is like performing CPR on a patient that died many weeks ago.
hero member
Activity: 770
Merit: 509
As someone who has been in hardware development for many years, EVERY bitcoin ASIC vendor has mainly had issues with the Board design, and Thermals/Mechanicals.

Once the chip design is done, its real easy to call the Chip FAB up and ask for chips...

HashFast - Original board VS Yoli 70% more performance with just a board change
KNC -  Ran out of VR modules because they bought an off the shelf part.  Then had Capacitors catch fire probably due to not spec for enough ripple current.
BFL-  Yea... Everything.  missed their power budget by 5x 
Cointerra-  Very complex board with heavy components on the backside.  cant be build fast.   Their issues are probably signal integrity and power related which explains the way less than 2Th.
Avalon-  Dont even want to talk about their problems.   Im still pissed.

ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.     Their issues are that they cant build boards fast enough, or they dont know how to properly design a power regulator, or they cant cool the chip they designed.


-Smily

Please don't compare hashfast to legit companies(excluding bfl)

Those companies all are able to produce and ship hundreds of machines a day.

Hashfast has averaged a whopping 6 units per day the past 3 months.

And the whole time they were sitting on their asses not shipping, they were creating next gen boards and a new production line which will not be used to give existing customers their hardware.
member
Activity: 113
Merit: 10
https://www.chynge.net/
As someone who has been in hardware development for many years, EVERY bitcoin ASIC vendor has mainly had issues with the Board design, and Thermals/Mechanicals.

Once the chip design is done, its real easy to call the Chip FAB up and ask for chips...

HashFast - Original board VS Yoli 70% more performance with just a board change
KNC -  Ran out of VR modules because they bought an off the shelf part.  Then had Capacitors catch fire probably due to not spec for enough ripple current.
BFL-  Yea... Everything.  missed their power budget by 5x 
Cointerra-  Very complex board with heavy components on the backside.  cant be build fast.   Their issues are probably signal integrity and power related which explains the way less than 2Th.
Avalon-  Dont even want to talk about their problems.   Im still pissed.

ALL of these companies Im sure have trays of chips sitting on shelves doing nothing.     Their issues are that they cant build boards fast enough, or they dont know how to properly design a power regulator, or they cant cool the chip they designed.


-Smily




full member
Activity: 185
Merit: 100
SO WHAT NOW WHAT? HASFAST USE NOW OUR MONEY TO PAY THEIR LAWSUITS?
Precisely.
Posted from Bitcointa.lk - #WjBJzGlIxWDIjb98

Actually it is worst than that, they are selling Golden Nonce ASIC chips mostly funded by their B1 (MPP), B2, B3, B4 customers to MrTeal and gateway (remember this http://eligius.st/~gateway/news/quick-visit-hashfast-hq) so they can afford to pay their lawyers to fight against these same customers.  What Irony?  Is MrTeal really that ignorant and actually believe what HashFast said is true (no delay to existing customers) or blinded by $$$ = don't give a damn?  I wonder if these same lawyers will go after whoever receives Golden Nonce chips before all prepaid customers receive their products?

The Habanero Project - Third Party HF Mining Board

I can't speak to how accurate all my information is and I'm not sure an official post from HashFast explaining all the reasons that the products are delayed is going to be forthcoming, but all I can say on the chip issue is that I've been told that the sale of excess chip inventory doesn't take product from the existing preorder customers since chips aren't the limiting factor they have.

Submitted by gateway on Sun, 12/22/2013 - 12:48
hero member
Activity: 966
Merit: 513
http://digitaljournal.com/pr/1819167

Deans & Lyons Lawyers Obtain a TRO against HashFast Technologies, "Freezing" its Bitcoin Wallets
Posted from Bitcointa.lk - #EiSnJ07GtWCWlpdE


Interesting... very interesting. I wonder if the same could be applied to BFL.

Probably. Then there's cointerra...and amc/vmc. Actually someone should just shut down all the scammy american manufacturers. None of em are worth crap.
hero member
Activity: 924
Merit: 1000
http://digitaljournal.com/pr/1819167

Deans & Lyons Lawyers Obtain a TRO against HashFast Technologies, "Freezing" its Bitcoin Wallets
Posted from Bitcointa.lk - #EiSnJ07GtWCWlpdE


Interesting... very interesting. I wonder if the same could be applied to BFL.


http://www.deanslyons.com/PDFs/2014-03-27-Temporary-Restraining-Order.pdf
hero member
Activity: 966
Merit: 513
see they can easily return my btc
member
Activity: 119
Merit: 10
Code:
Hi BitchImightbe,

Appreciate your patience in my response, we've been quite busy here.

If you wished to purchase ASICs in bulk, this requires a two phase entrance:

- The Golden Nonce ASIC Evaluation Kit (EVK), provides the board design files (BOM, Schematic, Gerbers/PCB layout files) and hardware development samples (one working Golden Nonce mining board, and two Golden Nonce ASICs) for US $10,000. The purpose of the evaluation kit is to help you decide if you want to move forward with your own designs and products that use the Golden Nonce ASIC.

- Beyond the EVK, if you choose to move forward with designs and products, you will need to purchase a Hardware Development Kit (HDK) for $25,000 (note we credit the initial $10k invested from the EVK). This provides everything you need (e.g., microcontroller software, manufacturing and test tools, and technical support) to be able to ramp mass production for products that use the Golden Nonce ASIC.

- We cost the ASICs starting at $800 each, with discounts starting in quantities over 500.

We greatly appreciate your interest in HashFast and our Golden Nonce ASICs. We're proud that we have the fastest products in the industry, better than anyone else, and we have every intention of continuing to innovate for our volume partners. 

Let me know if I can answer any questions here. Or if you're ready to move forward, please provide the organization name, address, and phone and method of payment (we accept wire and BTC).

Thanks,

Joe

--
Joe Russell
Senior Account Manager
[email protected]   Skype: JRhashfast  +1.415.429.4515

800 bucks / ASIC  Undecided
legendary
Activity: 1904
Merit: 1007

http://hashfast.com/live/
Posted from Bitcointa.lk - #mmrpxSDwspQYQwmO

Running steady at over 2.0 Th/s

Quote
12 hours   1,931.63 Gh/s

 Roll Eyes
Jump to: