I'm actually considering about ordering 6 of the MSI RX 570 4GB Armor OC's due to it being cheaper than the 580 versions I have.
The 580's I have only get 30-31Mh/s at 109 Watt per card max. If I decided to go with the 570's I believe that the speed will be around 28-29 depending on the overclock, and If I remember mining with my old 470... the power should be around 75-85 Watts max...
I don't recall anyone releasing a modified bios guide on the 570 yet specifically for Hynix memory(There are other ones for Samsung, etc..) Its just the luck of the draw with 570's, I think almost all 580 MSI Armor Oc's come with Samsung as I have 6 in a mining rig and all have Samsung which is strange...
~Zac
Topic: Hashrate RX 570 - page 23. (Read 204245 times)
hey guys can anyone here share their config settings
i copied a bios mod i found online for xfx rx 570 4gb blck ed elpida ram
the guy has about 28mh/s but i only have 25 mh/s
im thinking there is something wrong with my bat file
i copied a bios mod i found online for xfx rx 570 4gb blck ed elpida ram
the guy has about 28mh/s but i only have 25 mh/s
im thinking there is something wrong with my bat file
Sapphire RX570 Pulse 4GB:
Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
What settings/clocks are you using on the Elpida cards please?Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
I flashed bios (only memory straps from 1500 to 2000).
Core 1100
Memory 2000, because my asic quality on the card with Elpida is low. If you have asic quality over 72-3% you can go with 2050 on memory, but this will depend also from your voltage.
Have you increased voltage to your mem at all? I just think the cards are better cooled than mine. My cheapo Asus Expedition OC are running pretty hot and I think it affects memory stability a lot. Couldn't dual-mine ETH+SIA at 1266/1925 MHz. Had to lower both sets of clocks. Mining speed would go tits up and Claymore would crap out within less than a minute running otherwise.
Of course asic quality has to do with memory. Try increasing your memory on same levels on cards with different asic quality and on stock voltage and you will see it.
ASIC is measured by overall quality of the silicon wafer, and GPU location within that wafer (quality tends to improve towards the centre of the wafer). You can still get defects (areas of lower quality) within even the best wafers. Memory has nothing to do with the GPU's silicon wafer.
Quote
I haven't increased voltage at all, I am running on stock voltages.
How hot does your cards get and have you set custom fan setting in AB, it will chop few degrees off.
It's hot here currently, cards are between 69C and 81C (1075/1900, fans@54-65%). Can't use AB, it crashes Windows after applying o/c to the 7th card so I flashed the clock speeds. How hot does your cards get and have you set custom fan setting in AB, it will chop few degrees off.
Hey guys, I got a Gigabyte RX570 and it is achieving this incredible low hashrate of 33H/s out of the box on Monero. It's lower than i3 CPU mining. I know I still need to bios mod but is this out of the box hashrate right? Can anyone tell?
Ethereum hashrate 25mh/s
that's rather good but not really fast.. 
Got 6 x ASUS STRIX RX570 4GB OC
Mod strap: 1:1500--to 1:1625 till 1:2000 and 2:1500--to 2:1625 till 2:2000
Mod strap: 1:1500--to 1:1625 till 1:2000 and 2:1500--to 2:1625 till 2:2000
can you pls explain this? why dont you just copy the 1500 strap to all higher ones?
hi i just got the xfx rx 570 4gb black ed.
any one here who knows a guide on how to mod the bios?
any one here who knows a guide on how to mod the bios?
Got 6 x ASUS STRIX RX570 4GB OC
Mod strap: 1:1500--to 1:1625 till 1:2000 and 2:1500--to 2:1625 till 2:2000
using Smos
Zcash: 1.69KH/s (roughly 280/card) 1175core/1750mem - Powerstage 1 (Very stable probably can push it more but I like to run it stable then running it higher and hang a gpu every few hours)
Eth+Sia: 162MH/s + 1300MH/s (26.8-28MH/s and 220MH/s per card) 1100core/1900-1950mem(some cards cannot take 1950)
Cheers
Mod strap: 1:1500--to 1:1625 till 1:2000 and 2:1500--to 2:1625 till 2:2000
using Smos
Zcash: 1.69KH/s (roughly 280/card) 1175core/1750mem - Powerstage 1 (Very stable probably can push it more but I like to run it stable then running it higher and hang a gpu every few hours)
Eth+Sia: 162MH/s + 1300MH/s (26.8-28MH/s and 220MH/s per card) 1100core/1900-1950mem(some cards cannot take 1950)
Cheers
Sapphire RX570 Pulse 4GB:
Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
What settings/clocks are you using on the Elpida cards please?Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
I flashed bios (only memory straps from 1500 to 2000).
Core 1100
Memory 2000, because my asic quality on the card with Elpida is low. If you have asic quality over 72-3% you can go with 2050 on memory, but this will depend also from your voltage.
Have you increased voltage to your mem at all? I just think the cards are better cooled than mine. My cheapo Asus Expedition OC are running pretty hot and I think it affects memory stability a lot. Couldn't dual-mine ETH+SIA at 1266/1925 MHz. Had to lower both sets of clocks. Mining speed would go tits up and Claymore would crap out within less than a minute running otherwise.
Of course asic quality has to do with memory. Try increasing your memory on same levels on cards with different asic quality and on stock voltage and you will see it.
I haven't increased voltage at all, I am running on stock voltages.
How hot does your cards get and have you set custom fan setting in AB, it will chop few degrees off.
Hello,
I will order 6 of these cards too. Any specific strap did you use or copied a strap within the bios? And which straps did you modify? Can you share? Also what is your total power draw? Did you measure it?
thanks a lot!
hyyy
it is also possible to set the Voltage offset in the Firmware from the Sapphire nitro + 570 - 8gb like on the Sapphire nitro+ 470 - 8gb (HEX Editor)?
have someone try it?
i get on 470 - 28 mhs - 110 Watt
lg Martin
it is also possible to set the Voltage offset in the Firmware from the Sapphire nitro + 570 - 8gb like on the Sapphire nitro+ 470 - 8gb (HEX Editor)?
have someone try it?
i get on 470 - 28 mhs - 110 Watt
lg Martin
Hey everyone, I am trying to setup a Gigabyte rx 570 that I have. I have the timings figured out, but I cannot reach 2000 mhz on the memory. I can get to 1820 on the stock voltage of 900, but that only increases to 1870 with a voltage of 1100. What voltages have you used with the Elpida cards? How high would you say I can go that is still safe?
Thanks
Thanks
...Elpida?
Yes all cards that were bad had Elpida memory.
Sapphire RX570 Pulse 4GB:
Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
What settings/clocks are you using on the Elpida cards please?Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
I flashed bios (only memory straps from 1500 to 2000).
Core 1100
Memory 2000, because my asic quality on the card with Elpida is low. If you have asic quality over 72-3% you can go with 2050 on memory, but this will depend also from your voltage.
Have you increased voltage to your mem at all? I just think the cards are better cooled than mine. My cheapo Asus Expedition OC are running pretty hot and I think it affects memory stability a lot. Couldn't dual-mine ETH+SIA at 1266/1925 MHz. Had to lower both sets of clocks. Mining speed would go tits up and Claymore would crap out within less than a minute running otherwise.
I am about to get Asus RX570 Gaming (not OC version)
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
Sapphire RX 570 Pulse ITX on stock settings was about 24,5
Nice stock values actually. Can I run 6 of Sapphire ITX with Corsair HX1000i?
I am actually more inclined to get dual fan models for better heat and noise management as well as better resale value.
570s are more power consuming than 4xx especially on stock values. I believe you won't have any problems running 6 Sapphires mining solo ETH, but I really DO NOT recommend you this. Don't load your PSU over 85%.
I actually ordered HX1200i but will wait for it around 2 weeks. If I go with HX1000i. It is an immediate buy. My rig will be a mix of Asus, MSI, Gigabyte and maybe even Sapphire RX570 cards because RX 500 stocks are very scarce. I am buying what ever I find.
As an option for PSU I can get a used High Power 1200Watt Gold High Power Psu HP-1200-G14C-GOLD for %40-50 of the HX1000/1200i price.
Would it be a better choice?
I am about to get Asus RX570 Gaming (not OC version)
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
Sapphire RX 570 Pulse ITX on stock settings was about 24,5
Nice stock values actually. Can I run 6 of Sapphire ITX with Corsair HX1000i?
I am actually more inclined to get dual fan models for better heat and noise management as well as better resale value.
570s are more power consuming than 4xx especially on stock values. I believe you won't have any problems running 6 Sapphires mining solo ETH, but I really DO NOT recommend you this. Don't load your PSU over 85%.
I am about to get Asus RX570 Gaming (not OC version)
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
Sapphire RX 570 Pulse ITX on stock settings was about 24,5
Nice stock values actually. Can I run 6 of Sapphire ITX with Corsair HX1000i?
I am actually more inclined to get dual fan models for better heat and noise management as well as better resale value.
I am about to get Asus RX570 Gaming (not OC version)
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
Sapphire RX 570 Pulse ITX on stock settings was about 24,5
I am about to get Asus RX570 Gaming (not OC version)
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
My other option is Sapphire RX 570 Pulse ITX.
Can I achieve 25-26 with them?
I kinda prefer less heat and noise and I do not want to OC this or any other GPU I will get.
Also I am planning to use 6 of them on Corsair HX1000i PSU. I have seen builts with 6 of RX570 around 850Watt.
Any feedback is appreciated.
Sapphire RX570 Pulse 4GB:
Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
What settings/clocks are you using on the Elpida cards please?Hynix - 29,3 ETH + 670-680 DCR
Elpida - 28,7 ETH + 650-655 DCR
I flashed bios (only memory straps from 1500 to 2000).
Core 1100
Memory 2000, because my asic quality on the card with Elpida is low. If you have asic quality over 72-3% you can go with 2050 on memory, but this will depend also from your voltage.
Jump to: