got one step further.
Was using my original settings:
CORE 1315 DPM 4 V 950 MEM 2250 FAN 80
But also tried these from someone on page 13 of this thread:
CORE 1250 DPM 4 V 900 MEM 2250 FAN 80
Cards are running at 80% as I have that option in claymore settings
My cards (sapphire rx580 SE OC ) have been modded and run without issues under windows are 31.9MH/s at 103W/card.
Am using afterburner with 1315MHz GPU and 2250MHz mem.
have the rig up and running, but my MH/s are all over the place.
ETH - Total Speed: 167.028 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 4.170 Mh/s, GPU1 3.547 Mh/s, GPU2 2.104 Mh/s, GPU3 31.417 Mh/s, GPU4 31.384 Mh/s, GPU5 31.449 Mh/s, GPU6 31.471 Mh/s, GPU7 31.487 Mh/s
ETH: 01/13/18-22:08:09 - New job from asia1.ethermine.org:14444
ETH - Total Speed: 112.118 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 2.084 Mh/s, GPU1 4.170 Mh/s, GPU2 4.170 Mh/s, GPU3 3.569 Mh/s, GPU4 31.533 Mh/s, GPU5 31.492 Mh/s, GPU6 31.529 Mh/s, GPU7 3.570 Mh/s
ETH: 01/13/18-22:08:33 - New job from asia1.ethermine.org:14444
ETH - Total Speed: 138.264 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:13
ETH: GPU0 2.790 Mh/s, GPU1 4.168 Mh/s, GPU2 2.093 Mh/s, GPU3 31.523 Mh/s, GPU4 31.395 Mh/s, GPU5 31.524 Mh/s, GPU6 3.240 Mh/s, GPU7 31.532 Mh/s
ETH - Total Speed: 84.359 Mh/s, Total Shares: 23, Rejected: 0, Time: 00:15
ETH: GPU0 3.551 Mh/s, GPU1 3.551 Mh/s, GPU2 3.551 Mh/s, GPU3 31.537 Mh/s, GPU4 3.551 Mh/s, GPU5 31.517 Mh/s, GPU6 3.551 Mh/s, GPU7 3.550 Mh/s
ETH - Total Speed: 111.727 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 2.287 Mh/s, GPU1 4.167 Mh/s, GPU2 3.559 Mh/s, GPU3 31.545 Mh/s, GPU4 31.525 Mh/s, GPU5 3.559 Mh/s, GPU6 31.526 Mh/s, GPU7 3.559 Mh/s
I have seen the total go down as far a 24MH/s and as you can see the first 3 cards go to a max of around 4MH/s.
On ethermine.org, it shows me that I have a reported hash of 150.6MH/s and actual of 53.4MH/s
How would i be able to analyze this?
Edit: My stale shares also went from 5% to 27%
I am getting a lot of the below in my syslog.
amdgpu: [powerplay]
failed to send pre message 5c ret is 0
amdgpu: [powerplay]
failed to send message 5c ret is 0
But nanopool is ok. Anyone connect to Ethermine is ok ?