Dear
Can you miner Peercoin with BFG MIner in a Virtual Machine ?
Best regards
CG
Topic: How to Install BFG Miner on your new Raspberry Pi - A Step by Step Guide (Read 63885 times)
September 16, 2017, 10:26:27 PM
August 12, 2017, 08:48:26 PM
any help for a2 terminator?
June 04, 2017, 11:17:18 PM
i did not understand what do i do for step 5,6,7,8 end 9.would you be kind to explain. thank you in advance 
October 24, 2016, 09:11:21 AM
i am having asic mining technology scrypt 256Mh . how can i install bfgminer on Raspberry Pi ?
August 21, 2017, 10:03:57 PM
any help for a2 terminator?
https://bitcointalksearch.org/topic/ultra-under-overclock-image-for-a2-innosilicon-by-emdje-v50-672969
this link is for the latest image versions for a2 terminators by some one on the forums but it uses CGMiner with how to videos.
BFGMINER has never supported any of the A's from Innosilicon as far as i know but if you want support you can ask Luke the Dev of BFGMINER he may say write the code your self but might do it for a fee you would have to ask him .
October 24, 2016, 12:36:50 PM
What miner ? . yup it's a MAT MINER . Mining ASICs Technologies follow below
for the latest BFG to work you have to flash each board with a flasher you can only get here https://litecointalk.org/index.php?topic=27370.0 you have to ask
jstefanop
to send it hell probable want to sell it , then follow https://litecointalk.org/index.php?topic=27370.0 his post, it tells you how to flash it.
Then follow my post here https://bitcointalksearch.org/topic/alchemist-updated-support-added-for-rpi-with-a-broke-controler-1468120 it will tell you how to hook up a AlcheMiner/MAT miner to use any PI type PC or PC you want , they are the same miner with different names.
if the boards are all ready flashed then compile bfg like my post said, your set . why i said my post is BFG doesn't have all the fixes pulled or not all the fixes jstefanop did are in the master bfg yet once it is you can just install/compile BFG the normal way by following this post but make sure to use this when you do compile it
mainly this it is off in BFG by default and that works with Mat miners remember they are the same miner AlcheMiner or MAT aka Mining ASICs Technologies .
BFG is free, the Flasher is not, unless jstefanop gives it a way freely .The flasher is a paid for updated firmware that lets you use the free updated BFG drivers ( jstefanop did also) with those miners that fixed all most every issue those miners had.
thanks top
. Mining ASICs Technologies follow below for the latest BFG to work you have to flash each board with a flasher you can only get here https://litecointalk.org/index.php?topic=27370.0 you have to ask
jstefanop
to send it hell probable want to sell it , then follow https://litecointalk.org/index.php?topic=27370.0 his post, it tells you how to flash it.
Then follow my post here https://bitcointalksearch.org/topic/alchemist-updated-support-added-for-rpi-with-a-broke-controler-1468120 it will tell you how to hook up a AlcheMiner/MAT miner to use any PI type PC or PC you want , they are the same miner with different names.
if the boards are all ready flashed then compile bfg like my post said, your set . why i said my post is BFG doesn't have all the fixes pulled or not all the fixes jstefanop did are in the master bfg yet once it is you can just install/compile BFG the normal way by following this post but make sure to use this when you do compile it
Code:
chmod +x ./configure
./configure CFLAGS="-O2" --enable-scrypt --enable-alchemist
Code:
--enable-alchemist
BFG is free, the Flasher is not, unless jstefanop gives it a way freely .The flasher is a paid for updated firmware that lets you use the free updated BFG drivers ( jstefanop did also) with those miners that fixed all most every issue those miners had.
thanks top
April 07, 2016, 08:33:12 PM
hi, I have a pi-2 and the newest bfgminer, + the pi is recognizing my usb hub, but its not
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
make sure if you compiled your own BFG it has --enable-avalon the readme says it is on by default but it might be wise to compile it on any way
in the bfg folder do a version check it tells, if the --enable-avalon driver is on .
Code:
sudo ./bfgminer --version or bfgminer --version or sudo bfgminer --version or sudo /bfgminer --version
if it is, do a hub check
Code:
sudo ldconfig
lsusb
lsusb should list all the hubs plugged in to that pi .
if all that checks out try in the BFG folder
Code:
cd to your bfgminer
sudo apt-get remove libblkmaker-0.1-dev
sudo apt-get purge libblkmaker-0.1-dev
sudo apt-get install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev libudev-dev libusb-1.0-0-dev libevent-dev libgcrypt20-dev
sudo ./autogen.sh -rpath-link
sudo chmod +x ./configure
sudo ./configure CFLAGS="-O2" --enable-avalon --enable-broad-udevrules
make
sudo make install
sudo ldconfig
beyond that
check power to hub , does the pi really support it, Ive had a few hubs not work with RPI and BFG but do with other PI type PC'c even after i did a hub check .
thank you = i'm going to go give this a try
looks like theres a few new commands that i see here from what i've tried so far.
thank you
April 07, 2016, 04:37:29 PM
hi, I have a pi-2 and the newest bfgminer, + the pi is recognizing my usb hub, but its not
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
make sure if you compiled your own BFG it has --enable-avalon the readme says it is on by default but it might be wise to compile it on any way
in the bfg folder do a version check it tells, if the --enable-avalon driver is on .
Code:
sudo ./bfgminer --version or bfgminer --version or sudo bfgminer --version or sudo /bfgminer --version
if it is, do a hub check
Code:
sudo ldconfig
lsusb
lsusb should list all the hubs plugged in to that pi .
if all that checks out try in the BFG folder
Code:
cd to your bfgminer
sudo apt-get remove libblkmaker-0.1-dev
sudo apt-get purge libblkmaker-0.1-dev
sudo apt-get install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev libudev-dev libusb-1.0-0-dev libevent-dev libgcrypt20-dev
sudo ./autogen.sh -rpath-link
sudo chmod +x ./configure
sudo ./configure CFLAGS="-O2" --enable-avalon --enable-broad-udevrules
make
sudo make install
sudo ldconfig
beyond that
check power to hub , does the pi really support it, Ive had a few hubs not work with RPI and BFG but do with other PI type PC'c even after i did a hub check .
April 07, 2016, 04:48:30 AM
hi, I have a pi-2 and the newest bfgminer, + the pi is recognizing my usb hub, but its not
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
recognizing the avalon-2 sticks.
any suggestions?
i've tried many + still trying.
thank you
March 31, 2016, 10:40:03 AM
Code:
cd /home
sudo apt-get install -y build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev
sudo git clone https://github.com/luke-jr/bfgminer.git
cd /bfgminer
sudo ./autogen.sh
sudo chmod +x ./configure
sudo ./configure CFLAGS="-O2" --enable-scrypt --enable-broad-udevrules
or use
sudo ./configure (defaults are used)
make
sudo ldconfig
lsusb
sudo chmod 777 bfgminer
sudo ./bfgminer --version
sudo bfgminer or sudo ./bfgminer or sudo /bfgminer --scrypt -o stratum+tcp://your pool:port -u user id -p x your miners setting.
or for sha256 coin mining aka btc
sudo bfgminer or sudo ./bfgminer or sudo /bfgminer -o stratum+tcp://your pool:port -u user id -p x your miners setting.
March 31, 2016, 10:36:54 AM
sudo apt-get install bfminer
And enjoy!
And enjoy!
as far as i know
Code:
sudo apt-get install bfminer
Code:
sudo apt-get install bfminer
March 29, 2016, 03:08:24 PM
For me, step 5 comes back with something about bfgminer not being a valid directory.
Could somebody help me out?
Could somebody help me out?
Please post the exact error message and someone will be able to help.
March 21, 2016, 08:22:25 AM
Could we get updated instructions for the newer hardware & software?
I'm using the newer Jessie on a Pi 2 and I'm having some difficulty. For me, step 5 comes back with something about bfgminer not being a valid directory. I'm not sure what I'm doing wrong, but this learning process has been frustrating. Could somebody help me out?
I'm using the newer Jessie on a Pi 2 and I'm having some difficulty. For me, step 5 comes back with something about bfgminer not being a valid directory. I'm not sure what I'm doing wrong, but this learning process has been frustrating. Could somebody help me out?
July 10, 2015, 07:25:16 PM
hey guys, I know this is an older thread but I just have finally got off my but and started getting into the mining again. I just picked up a Pi, a Bitfury M-card (v3.0) and a bunch of H-cards v2.2, I was just wondering if anyone would have any info on how to get bfgminer to detect the cards? or if I should go to another mining software.
please the info on these kinds of cards is rare as but there are so many of these cards floating around on ebay and all over the forum. cheers
Josh
I'm not sure you can mix cards of different versions like that.please the info on these kinds of cards is rare as but there are so many of these cards floating around on ebay and all over the forum. cheers
Josh
IF it works, it would be using ./configure --enable-bfsb and then at runtime bfgminer -S bfsb:auto
June 27, 2014, 02:31:44 AM
Hey all. I am completely new to linux and pretty much asics. I picked up a pi and have 2 usb dualminer sticks that I want to run in scrypt only mode.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
Suggest popping over to http://asic.usertalk.info/index.php?topic=66.0 and reading the 2nd post in that thread. It should get you started.
Cassey
Sysop @ asic.usertalk.info
Thanks for the time being I am running the antminer u2s on the pie dualminers on pc thats always on.
June 23, 2014, 09:44:54 AM
Hey all. I am completely new to linux and pretty much asics. I picked up a pi and have 2 usb dualminer sticks that I want to run in scrypt only mode.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
Suggest popping over to http://asic.usertalk.info/index.php?topic=66.0 and reading the 2nd post in that thread. It should get you started.
Cassey
Sysop @ asic.usertalk.info
June 23, 2014, 12:20:35 AM
Hey all. I am completely new to linux and pretty much asics. I picked up a pi and have 2 usb dualminer sticks that I want to run in scrypt only mode.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
I have latest Raspbein OS installed.
I did the first 2 steps.
As I know I need bfgminer 4.0+ as thats the one that supports it I believe. Can anyone tell me how to proceed from here. I am connected to the pi through putty.
June 17, 2014, 04:32:23 PM
Thanks Luke.
That go me a step farther.
Now I got
configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.2+
tried
install uthash-dev 1.9.2+
but, of course, that didn't work.
Don'cha just hate newbies
That go me a step farther.
Now I got
configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.2+
tried
install uthash-dev 1.9.2+
but, of course, that didn't work.
Don'cha just hate newbies
but
Quote
root@sunwatch:~# sudo aptitude install uthash-dev
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
and than
Quote
cd /usr/src
wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/4.2.0/bfgminer-4.2.0.zip
unzip bfgminer-4.2.0.zip && mv bfgminer-4.2.0 bfgminer
cd bfgminer
sudo ./configure
sudo make
wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/4.2.0/bfgminer-4.2.0.zip
unzip bfgminer-4.2.0.zip && mv bfgminer-4.2.0 bfgminer
cd bfgminer
sudo ./configure
sudo make
always the same and I don't know?
Code:
checking whether HASH_ITER is declared... no
configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.4+
On my Pi is the newest Kernel!?
greets
May 08, 2014, 11:51:52 AM
For what its worth, I just placed my 16GB Gentoo Raspberry PI with 3.99.0 of bfgminer installed up on Vuze (torrent). It compresses down to a bit over 1gb, can be unzipped and dd'ed directly to a 16gb sdhc card.
Search for "GentooPIimage080514.gz" - with luck you will find it.
Search for "GentooPIimage080514.gz" - with luck you will find it.
March 06, 2014, 07:33:04 AM
I'm still using bfgminer-3.2.1 and it's working just fine.
Not producing much at 30Gh/s, but still running.
Not producing much at 30Gh/s, but still running.
Jump to: