default, w/o 'i' and o/c
What do you mean default ? You left windows virtual memory to default ?
You need to put at least 64Go virtual memory if you have 6 cards
Topic: hsrminer - Nvidia mining software for various algos by palgin&alexkap - page 32. (Read 30791 times)
January 05, 2018, 01:50:54 PM
What do you mean default ? You left windows virtual memory to default ?
You need to put at least 64Go virtual memory if you have 6 cards
January 05, 2018, 11:51:30 AM
Quote
Current testing speeds(Neoscrypt):
1080 - 1280-1300 kh/s (non-OC)
1080 - 1280-1300 kh/s (non-OC)
I'd be interested to know how you achieved these figures. I had a dry test run on my PC sporting a (water-chilled) 1080, and I achieved just over 1300kh/s... but at clocks beyond what you could get on any water-cooled let alone an air-cooled setup. I did set 12Gigs of virtual mem as well.
Would be interested to know what parameters you set to claim 1300kh/s at "stock" clocks on a 1080.
Using the test neoscrypt test-version.
1080ti can make 2000+
January 05, 2018, 11:41:35 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 11:06:04 AM
default, w/o 'i' and o/c
January 05, 2018, 11:01:00 AM
How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!
It's working for almost everyone. Have you tried without intensity parameter ?
INFO : [09:02:02] : Dev_Main OK.
INFO : [09:02:03] : Dev_Backup OK.
INFO : [09:02:03] : Dev pools checked, at least 1 accessible, continue...
INFO : [09:02:03] : POOL: stratum+tcp://eu1.altminer.net:10000
INFO : [09:02:03] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
INFO : [09:02:03] : Checking for NVML...
INFO : [09:02:03] : NVML monitoring enabled, continue...
INFO : [09:02:03] : 8 GPUs found/specified, initializing miner...
INFO : [09:02:11] : Share difficulty reset -- 64 (0.00098)
INFO : [09:02:11] : New block #26553 received, new difficulty is 1559.057
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Looks like low virtual memory. What is your setting ?
January 05, 2018, 07:43:37 AM
Quote
Current testing speeds(Neoscrypt):
1080 - 1280-1300 kh/s (non-OC)
1080 - 1280-1300 kh/s (non-OC)
I'd be interested to know how you achieved these figures. I had a dry test run on my PC sporting a (water-chilled) 1080, and I achieved just over 1300kh/s... but at clocks beyond what you could get on any water-cooled let alone an air-cooled setup. I did set 12Gigs of virtual mem as well.
Would be interested to know what parameters you set to claim 1300kh/s at "stock" clocks on a 1080.
Using the test neoscrypt test-version.
January 05, 2018, 07:20:37 AM
Quote
Current testing speeds(Neoscrypt):
1080 - 1280-1300 kh/s (non-OC)
1080 - 1280-1300 kh/s (non-OC)
I'd be interested to know how you achieved these figures. I had a dry test run on my PC sporting a (water-chilled) 1080, and I achieved just over 1300kh/s... but at clocks beyond what you could get on any water-cooled let alone an air-cooled setup. I did set 12Gigs of virtual mem as well.
Would be interested to know what parameters you set to claim 1300kh/s at "stock" clocks on a 1080.
Using the test neoscrypt test-version.
January 05, 2018, 06:11:02 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 06:09:06 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 06:08:45 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 06:07:21 AM
I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
How could I set P0 state ?
Unfortunately, in my case, this resulted in same hashrate but very high bad shares.
January 05, 2018, 05:13:16 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 04:59:42 AM
I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
How could I set P0 state ?
January 05, 2018, 04:54:04 AM
WOW instead of 2.2kh im getting 2.8
what's your GPU and power/oc settings?I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.
1070 - 1.1 90% PDU +140/+500
January 05, 2018, 03:18:11 AM
I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels
January 05, 2018, 03:00:41 AM
Quote
Current testing speeds(Neoscrypt):
1080 - 1280-1300 kh/s (non-OC)
1080 - 1280-1300 kh/s (non-OC)
I'd be interested to know how you achieved these figures. I had a dry test run on my PC sporting a (water-chilled) 1080, and I achieved just over 1300kh/s... but at clocks beyond what you could get on any water-cooled let alone an air-cooled setup. I did set 12Gigs of virtual mem as well.
Would be interested to know what parameters you set to claim 1300kh/s at "stock" clocks on a 1080.
Using the test neoscrypt test-version.
January 05, 2018, 01:04:22 AM
How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!
It's working for almost everyone. Have you tried without intensity parameter ?
INFO : [09:02:02] : Dev_Main OK.
INFO : [09:02:03] : Dev_Backup OK.
INFO : [09:02:03] : Dev pools checked, at least 1 accessible, continue...
INFO : [09:02:03] : POOL: stratum+tcp://eu1.altminer.net:10000
INFO : [09:02:03] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
INFO : [09:02:03] : Checking for NVML...
INFO : [09:02:03] : NVML monitoring enabled, continue...
INFO : [09:02:03] : 8 GPUs found/specified, initializing miner...
INFO : [09:02:11] : Share difficulty reset -- 64 (0.00098)
INFO : [09:02:11] : New block #26553 received, new difficulty is 1559.057
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
January 05, 2018, 12:21:19 AM
Please add a flag to set the number of stratum connection retries before exiting the miner if a stratum connection fails/dies - I'd like to use this version in an automation script, but there's no clean way to shut it down
Just need a "--retries=###" type command-line parameter
Just need a "--retries=###" type command-line parameter
Seconded.
And/or, if you could make sure the output is unbuffered. I run my miners in a python script with subprocess.popen() and pipe stdout, which helps me watch for disconnects. This works with cli apps that don't buffer their output, and on linux, it works with everything since I can prepend "stdbuf -o0" to force unbuffered stdout ... but on Windows, the process just hangs until enough connection errors mount up to fill the buffer. Then I can catch the error and kill the program, but if it just had a control for # of retries, and/or didn't buffer stdout, I could use it.
January 04, 2018, 09:17:58 PM
Please add a flag to set the number of stratum connection retries before exiting the miner if a stratum connection fails/dies - I'd like to use this version in an automation script, but there's no clean way to shut it down
Just need a "--retries=###" type command-line parameter
Just need a "--retries=###" type command-line parameter
January 04, 2018, 08:46:11 PM
WOW instead of 2.2kh im getting 2.8
with two GPUs, right?
Jump to: