[HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet - page 169.

LiteBit

legendary

Activity: 1133

Merit: 1050

Quote from: rfcdejong on February 19, 2015, 04:42:56 PM

About the exploit / vulnerable thing on time drift / time warp for PoS, did someone check out for other coins yet if they are Vulnerable as well? BALLS and 10K for example, they stake high!

I'm sure iGotBalls only cares about balls. #HeDon'tGotTimeDrift

rfcdejong

hero member

Activity: 798

Merit: 500

About the exploit / vulnerable thing on time drift / time warp for PoS, did someone check out for other coins yet if they are Vulnerable as well? BALLS and 10K for example, they stake high!

gullu

full member

Activity: 457

Merit: 103

Quote from: presstab on February 19, 2015, 03:32:33 PM

Quote from: gullu on February 19, 2015, 03:14:30 PM

i am using wallet v 1.1.0.1.
i am pretty sure that i am on right right block chain.
i send some coins over to coin-swap.
tx: c2ab866b707d5de272cb5c3accc9727eb6754bb073a9b5836e94d8227cadfce6

wallet shows 87 comfirms but nothing showing up in coin-swap.

That is on the correct chain. We heard from coin-swap and they are still updating their wallet. Check in with them.

thanks.
will check up with coin-swap.

presstab

legendary

Activity: 1330

Merit: 1000

Blockchain Developer

Quote from: gullu on February 19, 2015, 03:14:30 PM

i am using wallet v 1.1.0.1.
i am pretty sure that i am on right right block chain.
i send some coins over to coin-swap.
tx: c2ab866b707d5de272cb5c3accc9727eb6754bb073a9b5836e94d8227cadfce6

wallet shows 87 comfirms but nothing showing up in coin-swap.

That is on the correct chain. We heard from coin-swap and they are still updating their wallet. Check in with them.

xx3

newbie

Activity: 30

Merit: 0

I just changed the old wallet to the new one.
But it's 3 days now and it still doesn't finish sync-ing. It seems stuck at 239762. The number of blocks left goes up and down from time to time.

Pls help me fix it.
Thanks.

gullu

full member

Activity: 457

Merit: 103

i am using wallet v 1.1.0.1.
i am pretty sure that i am on right right block chain.
i send some coins over to coin-swap.
tx: c2ab866b707d5de272cb5c3accc9727eb6754bb073a9b5836e94d8227cadfce6

wallet shows 87 comfirms but nothing showing up in coin-swap.

LiteBit

legendary

Activity: 1133

Merit: 1050

Quote from: presstab on February 19, 2015, 11:28:13 AM

Quote from: m33 on February 19, 2015, 02:31:05 AM

deposit at cryptsy extra slow

f97186c66b0b6b4d7beacc0e90a5b3c7688974cdeb0333ca1e41a5a2d0bb1b84

Did not even show in pending. only show up after 25 confirms , was about to submit a ticket than it pop up, , was send thru multi send . is this normal?

Cryptsy might still have their wallet in maintenance mode.

Cryptsy seems to consistently have a number of wallets in maintenance mode.

presstab

legendary

Activity: 1330

Merit: 1000

Blockchain Developer

Quote from: m33 on February 19, 2015, 02:31:05 AM

deposit at cryptsy extra slow

f97186c66b0b6b4d7beacc0e90a5b3c7688974cdeb0333ca1e41a5a2d0bb1b84

Did not even show in pending. only show up after 25 confirms , was about to submit a ticket than it pop up, , was send thru multi send . is this normal?

Cryptsy might still have their wallet in maintenance mode.

iantunc

sr. member

Activity: 433

Merit: 250

We are the first to program your future (c)

Quote from: m33 on February 19, 2015, 02:31:05 AM

deposit at cryptsy extra slow

f97186c66b0b6b4d7beacc0e90a5b3c7688974cdeb0333ca1e41a5a2d0bb1b84

Did not even show in pending. only show up after 25 confirms , was about to submit a ticket than it pop up, , was send thru multi send . is this normal?

Cryptsy has a very lagging engine, 25 confirms without pending status are completely normal.

David Latapie

hero member

Activity: 658

Merit: 503

Monero Core Team

Quote from: presstab on February 16, 2015, 01:43:02 AM

I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000.

I added two rpc commands:
strictprotocol
strictincoming

If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"

If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.

https://github.com/hyperstake/HyperStake/releases/tag/v1.1

I updated the list of RPC calls. Don't forget to document the wiki! All of you, all of us, not just presstab or the whole developers
http://hyperstake.wikia.com/index.php?title=RPC&diff=4662&oldid=4661

m33

legendary

Activity: 1064

Merit: 1000

Never invest with borrowed coins

deposit at cryptsy extra slow

f97186c66b0b6b4d7beacc0e90a5b3c7688974cdeb0333ca1e41a5a2d0bb1b84

Did not even show in pending. only show up after 25 confirms , was about to submit a ticket than it pop up, , was send thru multi send . is this normal?

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: eprocent on February 19, 2015, 12:21:24 AM

Quote from: presstab on February 19, 2015, 12:13:04 AM

Quote from: eprocent on February 19, 2015, 12:08:29 AM

Quote from: presstab on February 19, 2015, 12:02:33 AM

Quote from: eprocent on February 19, 2015, 12:00:50 AM

Thx presstab do not understand this <#ofthreads>

Think of threads as how many processes your CPU will run. So 1 would be a lighter load on your CPU than 4.

"setgenerate true 16" is ok?

Sure, just see how it goes.

Before i question you about debug comand i send "setgenerate true" and wallwt blocked. Now wallet not load
message is: This application has requested the runtime to terminate it on usual way. Please contact the app suport team

What need now?

I restarted wallet and now is ok. Thank you very much. I send you on hyp addres in PM. Thx again! Good luck!

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: presstab on February 19, 2015, 12:13:04 AM

Quote from: eprocent on February 19, 2015, 12:08:29 AM

Quote from: presstab on February 19, 2015, 12:02:33 AM

Quote from: eprocent on February 19, 2015, 12:00:50 AM

Thx presstab do not understand this <#ofthreads>

Think of threads as how many processes your CPU will run. So 1 would be a lighter load on your CPU than 4.

"setgenerate true 16" is ok?

Sure, just see how it goes.

Before i question you about debug comand i send "setgenerate true" and wallwt blocked. Now wallet not load
message is: This application has requested the runtime to terminate it on usual way. Please contact the app suport team

What need now?

presstab

legendary

Activity: 1330

Merit: 1000

Blockchain Developer

Quote from: eprocent on February 19, 2015, 12:08:29 AM

Quote from: presstab on February 19, 2015, 12:02:33 AM

Quote from: eprocent on February 19, 2015, 12:00:50 AM

Thx presstab do not understand this <#ofthreads>

Think of threads as how many processes your CPU will run. So 1 would be a lighter load on your CPU than 4.

"setgenerate true 16" is ok?

Sure, just see how it goes.

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: presstab on February 19, 2015, 12:02:33 AM

Quote from: eprocent on February 19, 2015, 12:00:50 AM

Thx presstab do not understand this <#ofthreads>

Think of threads as how many processes your CPU will run. So 1 would be a lighter load on your CPU than 4.

"setgenerate true 16" is ok?

presstab

legendary

Activity: 1330

Merit: 1000

Blockchain Developer

Quote from: eprocent on February 19, 2015, 12:00:50 AM

Thx presstab do not understand this <#ofthreads>

Think of threads as how many processes your CPU will run. So 1 would be a lighter load on your CPU than 4.

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: presstab on February 18, 2015, 11:54:17 PM

Quote from: eprocent on February 18, 2015, 11:47:07 PM

Quote from: presstab on February 18, 2015, 09:40:13 PM

Got testnet up and running for HYP. As you can see in the code, it came complete with a premine scam Grin

Code:

if(nHeight == 1)
   nSubsidy = 50000000 * COIN; // 50 million premine for testnet so we can be rich
else
   nSubsidy = 1000 * COIN;

PM me if you want some coins to mess around with, don't post your testnet address here please.

Here is a windows binary - https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I downloaded https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip I unziped and now not understand yet how I connect using: HyperStake-qt.exe -testnet -addnode=192.241.233.70

I am a newbie in POW, please explain me. Thx.

Yes those are startup switches from command line.
Open command line, then change your directory to where the .exe is

Code:

cd c:\users\presstab\hyp
HyperStake-qt.exe -testnet -addnode=192.241.233.70

Do that and it should launch the wallet in testnet mode and connect to the correct peer. Then in the wallet you can go to debug "setgenerate true <#ofthreads>". I ran 16 threads and was CPU mining PoW blocks pretty quick. Feel free to send me your testnet address and I will send you some of the premine when I get to the correct wallet.

Thx presstab do not understand this <#ofthreads> "setgenerate true <#ofthreads>"

presstab

legendary

Activity: 1330

Merit: 1000

Blockchain Developer

Quote from: eprocent on February 18, 2015, 11:47:07 PM

Quote from: presstab on February 18, 2015, 09:40:13 PM

Got testnet up and running for HYP. As you can see in the code, it came complete with a premine scam Grin

Code:

if(nHeight == 1)
   nSubsidy = 50000000 * COIN; // 50 million premine for testnet so we can be rich
else
   nSubsidy = 1000 * COIN;

PM me if you want some coins to mess around with, don't post your testnet address here please.

Here is a windows binary - https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I downloaded https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip I unziped and now not understand yet how I connect using: HyperStake-qt.exe -testnet -addnode=192.241.233.70

I am a newbie in POW, please explain me. Thx.

Yes those are startup switches from command line.
Open command line, then change your directory to where the .exe is

Code:

cd c:\users\presstab\hyp
HyperStake-qt.exe -testnet -addnode=192.241.233.70

Do that and it should launch the wallet in testnet mode and connect to the correct peer. Then in the wallet you can go to debug "setgenerate true <#ofthreads>". I ran 16 threads and was CPU mining PoW blocks pretty quick. Feel free to send me your testnet address and I will send you some of the premine when I get to the correct wallet.

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: eprocent on February 18, 2015, 11:47:07 PM

Quote from: presstab on February 18, 2015, 09:40:13 PM

Got testnet up and running for HYP. As you can see in the code, it came complete with a premine scam Grin

Code:

if(nHeight == 1)
   nSubsidy = 50000000 * COIN; // 50 million premine for testnet so we can be rich
else
   nSubsidy = 1000 * COIN;

PM me if you want some coins to mess around with, don't post your testnet address here please.

Here is a windows binary - https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I downloaded https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip I unziped and now not understand yet how I connect using: HyperStake-qt.exe -testnet -addnode=192.241.233.70

I am a newbie in POW, please explain me. Thx.

Can create .conf file? and what put in this file?

eprocent

sr. member

Activity: 826

Merit: 255

Quote from: presstab on February 18, 2015, 09:40:13 PM

Got testnet up and running for HYP. As you can see in the code, it came complete with a premine scam Grin

Code:

if(nHeight == 1)
   nSubsidy = 50000000 * COIN; // 50 million premine for testnet so we can be rich
else
   nSubsidy = 1000 * COIN;

PM me if you want some coins to mess around with, don't post your testnet address here please.

Here is a windows binary - https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip

To connect use: HyperStake-qt.exe -testnet -addnode=192.241.233.70
PoW is active for testnet, so go ahead and use "setgenerate true" in the debug console.

I downloaded https://github.com/hyperstake/HyperStake/releases/download/v1.1/HyperStake-qt-v1.1.0.2-withtestnet-windows.zip I unziped and now not understand yet how I connect using: HyperStake-qt.exe -testnet -addnode=192.241.233.70

I am a newbie in POW, please explain me. Thx.

Topic: [HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet - page 169. (Read 679332 times)