Did you use repair wallet?
Yes
Topic: [HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet - page 171. (Read 679332 times)
February 17, 2015, 06:10:44 PM
February 17, 2015, 06:03:34 PM
Make sure you are using the github.com/hyperstake/hyperstake repo
That fixed it, thanks.
February 17, 2015, 05:57:09 PM
February 17, 2015, 05:45:57 PM
Now what?
February 17, 2015, 04:55:54 PM
I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000.
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
I'm using Ubuntu 14.04 and the latest code from Github. I opened the debug window and typed "strictincoming true":
Quote
13:12:30 strictincoming true
13:12:30 Method not found (code -32601)
13:12:30 Method not found (code -32601)
Make sure you are using the github.com/hyperstake/hyperstake repo
February 17, 2015, 03:51:49 PM
I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000.
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
I'm using Ubuntu 14.04 and the latest code from Github. I opened the debug window and typed "strictincoming true":
Quote
13:12:30 strictincoming true
13:12:30 Method not found (code -32601)
13:12:30 Method not found (code -32601)
February 17, 2015, 03:29:13 PM
Yesterday I sent 73k+ HYP to Poloniex and it still has not shown up there. I asked on Poloniex and they told me make sure I was using the newest wallet (I am v1.1.0.1) and check the blockchain and transaction. At the time my wallet was telling me the transaction was in block 239010 and the most recent block on hyp.cryptocoinexplorer.com was about 23880, so I decided to wait to see if when it got to 239010 then maybe Poloniex's wallets would sync and the transaction would show up, but nope.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
First step, take a deep breath and realize that you are on the wrong chain, so the coins are still owned by you on the correct chain
Backup your wallet!Second step, get in sync https://bitcointalksearch.org/topic/m.10475602 (also a new build was released last night v1.0.1.2, has some more refinements, but not mandatory. https://github.com/hyperstake/HyperStake/releases/tag/v1.1
Third step, go to debug console and type "strictincoming true". Once fully synced, click tools->repairwallet.
Fourth step, resend your transaction once your block height matches the block height of hyp.cryptocoinexplorer.com
Edit - thanks LiteBit for beating me to it.
No deep breath necessary, I did not mean to sound panicked at all. I am not really worried about it, just a little annoyed that it happened, I should have tested it with a small transaction first.
I already had version 1.1.0.1, I have now downloaded 1.1.0.2 and I have it syncing and set "strictincoming true". When it fully syncs I will try the wallet repair and see what happens.
Thanks for the help presstab and LiteBit.
February 17, 2015, 01:29:01 PM
I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000.
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
"strictincoming" is needed on my end and it works like a charm, cpu load is most of the time iddle.I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
But still often out of sync displayed so still many users on the wrong chain that get connected.
Maybe a more aggressive approach would be better ?
Simply ignoring/banning users that are on the wrong chain as it is done in some other projects.
Can you make these options work using command line and as conf options ?
Is update notification now active in latest versions or was it just a try out in one of the test build ?
Trololoh I included this, and I recommend you only use this rpc call if strictincoming is not doing the trick. "strictprotocol true"
And yes, alerts are active in all new wallet builds.
February 17, 2015, 01:24:40 PM
A potential bad salad situation was handled well. Good job getting through it Presstab.
February 17, 2015, 01:01:14 PM
I have updated the github release page with a new build of the wallet. It contains new checkpoints and ups the protocol version to 72001 from 72000.
I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
"strictincoming" is needed on my end and it works like a charm, cpu load is most of the time iddle.I added two rpc commands:
strictprotocol
strictincoming
If you are having trouble with high CPU and other peers trying to give you wrong chain data, or requesting data continuously the use "strictincoming true"
If you still have more problems, you can try strictprotocol. Please do not use this unless you absolutely have to. It will drop your peer count low, and doesn't connect you to the main pool of peers.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
But still often out of sync displayed so still many users on the wrong chain that get connected.
Maybe a more aggressive approach would be better ?
Simply ignoring/banning users that are on the wrong chain as it is done in some other projects.
Can you make these options work using command line and as conf options ?
Is update notification now active in latest versions or was it just a try out in one of the test build ?
February 17, 2015, 12:55:12 PM
Yesterday I sent 73k+ HYP to Poloniex and it still has not shown up there. I asked on Poloniex and they told me make sure I was using the newest wallet (I am v1.1.0.1) and check the blockchain and transaction. At the time my wallet was telling me the transaction was in block 239010 and the most recent block on hyp.cryptocoinexplorer.com was about 23880, so I decided to wait to see if when it got to 239010 then maybe Poloniex's wallets would sync and the transaction would show up, but nope.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
...
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
...
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
First step, take a deep breath and realize that you are on the wrong chain, so the coins are still owned by you on the correct chain
Backup your wallet!Second step, get in sync https://bitcointalksearch.org/topic/m.10475602 (also a new build was released last night v1.0.1.2, has some more refinements, but not mandatory. https://github.com/hyperstake/HyperStake/releases/tag/v1.1
Third step, go to debug console and type "strictincoming true". Once fully synced, click tools->repairwallet.
Fourth step, resend your transaction once your block height matches the block height of hyp.cryptocoinexplorer.com
Edit - thanks LiteBit for beating me to it.
-Send a small amount 1st to make sure everything works as planned also on the exchange side.
Works for all alt coins and saves you a lot of headache.
February 17, 2015, 10:57:07 AM
Yesterday I sent 73k+ HYP to Poloniex and it still has not shown up there. I asked on Poloniex and they told me make sure I was using the newest wallet (I am v1.1.0.1) and check the blockchain and transaction. At the time my wallet was telling me the transaction was in block 239010 and the most recent block on hyp.cryptocoinexplorer.com was about 23880, so I decided to wait to see if when it got to 239010 then maybe Poloniex's wallets would sync and the transaction would show up, but nope.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
First step, take a deep breath and realize that you are on the wrong chain, so the coins are still owned by you on the correct chain
Backup your wallet!Second step, get in sync https://bitcointalksearch.org/topic/m.10475602 (also a new build was released last night v1.0.1.2, has some more refinements, but not mandatory. https://github.com/hyperstake/HyperStake/releases/tag/v1.1
Third step, go to debug console and type "strictincoming true". Once fully synced, click tools->repairwallet.
Fourth step, resend your transaction once your block height matches the block height of hyp.cryptocoinexplorer.com
Edit - thanks LiteBit for beating me to it.
February 17, 2015, 10:56:01 AM
Yesterday I sent 73k+ HYP to Poloniex and it still has not shown up there. I asked on Poloniex and they told me make sure I was using the newest wallet (I am v1.1.0.1) and check the blockchain and transaction. At the time my wallet was telling me the transaction was in block 239010 and the most recent block on hyp.cryptocoinexplorer.com was about 23880, so I decided to wait to see if when it got to 239010 then maybe Poloniex's wallets would sync and the transaction would show up, but nope.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Block hash for 239010 on the correct fork is: 778feb8d0f66f5c5bceee85ac198f842f921c16535856db51ec449bc501e1973
It looks like your wallet is on the wrong fork. Your hash for block 239010 is different.
So we know you're not on the correct blockchain by that.
Then you should upgrade to at least v1.1, sync up, double check you're on the right chain by going to the console and typing
Code:
getblockhash 239010
Verify with an explorer and then resend to Polo. February 17, 2015, 10:39:00 AM
Here is a pic with coffee cup for scale. Notice that the odroid is smaller than my WDTV.
Love the cup LOL
February 17, 2015, 10:32:36 AM
Yesterday I sent 73k+ HYP to Poloniex and it still has not shown up there. I asked on Poloniex and they told me make sure I was using the newest wallet (I am v1.1.0.1) and check the blockchain and transaction. At the time my wallet was telling me the transaction was in block 239010 and the most recent block on hyp.cryptocoinexplorer.com was about 23880, so I decided to wait to see if when it got to 239010 then maybe Poloniex's wallets would sync and the transaction would show up, but nope.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
Also if I search for my TXID on hyp.cryptocoinexplorer.com it says it is not found.
What do I need to do? Is my HYP gone?
And now my wallet won't sync, it says there is 5 connections to network but is sitting at 112 blocks behind.
I have made backups and downloaded the bootstrap and have started resyncing, hopefully that helps something.
February 16, 2015, 11:14:39 PM
Press! In new wallet (1.1.0.1) "-datadir=" switch not working. Please fix it.
Thanks.
Thanks.
Allejupa worked hard to get the code working today. I have updated the release page with a new build.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
whats this resync again?
Try this
https://bitcointalksearch.org/topic/m.10475602
February 16, 2015, 10:59:02 PM
Press! In new wallet (1.1.0.1) "-datadir=" switch not working. Please fix it.
Thanks.
Thanks.
Allejupa worked hard to get the code working today. I have updated the release page with a new build.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
whats this resync again?
February 16, 2015, 06:58:06 PM
Press! In new wallet (1.1.0.1) "-datadir=" switch not working. Please fix it.
Thanks.
Thanks.
Allejupa worked hard to get the code working today. I have updated the release page with a new build.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
Tested. Working well.
Thanks, Press & Co!
February 16, 2015, 04:58:22 PM
Press! In new wallet (1.1.0.1) "-datadir=" switch not working. Please fix it.
Thanks.
Thanks.
Allejupa worked hard to get the code working today. I have updated the release page with a new build.
https://github.com/hyperstake/HyperStake/releases/tag/v1.1
February 16, 2015, 04:28:59 PM
whats going on dificulty is sky high double then yesterday 14.13
I haven't had my wallet running consistently post-fork. Lots of rebuilds, and not leaving it on overnight. Its now 24/7. That definitely adds some. Also more peers making their way over to the correct chain. Being on the wrong chain lowers our diff because less competition. Once they get to the correct chain, they have even more weight than they would have had since they have been essentially offline for a few days.
This is my guess at least. Before the fork we were in the 10-17 range depending on the moment.
Jump to: