Topic: Innosilicon Terminator 3 - page 3. (Read 24477 times)

If you haven't heard from them you are probably fine, also as the alternative product being offered is the T3-50T it appears the production issues have not affected that model.

I wonder what is going to happen to my t3-50t due in august

Just a heads up, they have over committed on some of the August T3-40T allocation due to "production issues"

People are being offered September slots instead on alternative products.

Nice work  keep working at them.  I gave you a merit for this post. you should no longer be a newbie.  that will update by tommorow

User 'Inno_ASIC' has not chosen to allow messages from newbies. Could you kindly PM me then to give you the order number?

@Inno_ASIC:

A month ago I had payment confirmation from your team and several emails have been sent to your company together with multiple posts for some updates... Nothing happened.

Your email (payment confirmation) stated:


With the month passed and shipment to be made within 1 month... could I kindly get some updates on my order?

Edit no 1: After emailing to miner_market <[email protected]> got a reply:


Fingers crossed now

Edit no 2 (31st of July):
Confirmation that my transaction is queued up based on payment sequence. Waiting for updates sometimes the following week with - hopefully - a tracking number.
Thank you @philipma1957

Edit no. 3 (5th of august)

A tracking number has been received

Edit no. 4 (9th August)
The miner has arrived, it is working beautifully (steady 29.4th on factory settings but pulling 2500W - will need better vent), it is clean, no dust, no issues except the sound .
Although, I like the small rubber 'feet' that reduce the vibrations.
This was indeed an amazing experience (innosilicon first purchase/panic/and all those mixed feelings)


Final question, hopefully, do the firmware update usually improves stability and/or consumption?

Both my 30T's were pristine. UI they show about 28-32 th/s, pool side is consistent higher 29.XX th/s.

Yeah mine are T39's as well.

Perfect clean as a whistle.

That was a t3 t39

I am running it at balanced+

It mines on and on so far at about 35th

Do not think it will mine well in a home.  Fans are simply set to 100%

Pisses me off as they should run at 85% at balanced +

Wastes power and ages the fans to set them to 100%.

My July batch arrived as well, apparently they look well "burned in" with a light coating of dust on the fans. First time I've had any from inno with dust on the fans.

No doubt they will just say its from the burn in process if I bring it up, but will keep you updated.

Phil was yours clean?

It really should be two c13 connectors like bitmain’s s17.

I am reaching the 1ph level in gear.

The room is still under 90f but until the fall we will stay at 90f

 24/7 for next 60 days.

Running 3300 watts on a c13 is wrong.

Running 3300 watts on a c19 is borderline.

We have a c19 to our m20s frankly it makes me nervous since we are at

3360/216 = 15.5 amps.

I have a second m20s

So I would have two units running on the edge of safety

At least the t57 will have lower settings.

So if I drop to 50th and do 2400 watts it would be good.

It will be interesting to see the results of this one.

The dual tube design gives me high hopes. More chips, and better cooling than single tube. Looks like just two T2 stacked on top of each other.

Power draw is high, i'm curious if they will have C13 connector, I believe its only rated for 15A.

Thank you very much for your reply. I think I'll go for it and order eight, better than waiting for Bitmain to release another pre-sale.

Thanks again.

They are a reputable company. That appears to be their most recent launch and is in pre-order stages. It isn't an improvement in efficiency @ .0578 J/GH , but is better than the T2T they have available. You would still be dealing with a pre-order though there aren't to many other options. You can also follow the links from this thread to manufacturers or distributors depending - Current List of Competitive Hardware

Edit: It appears Inno_Asic went straight to the sales thread and not a discussion thread - https://bitcointalksearch.org/topic/innosilicon-launches-new-enhanced-t3-btc-miner-at-57ths-5163003
I was considering creating a discussion topic for this miner but it probably fits well enough here. These are the specs taken from the website. They do say efficiency mode should deliver great results but I just look at stock.

Hello all,

Just waiting for INNOSILICON to get back to me regarding a query. If I decide to go ahead with placing a preorder with them for the 57t, I wanted to check that I have the genuine site;

https://innosilicon.com/html/t3+57t-miner/index.html

I ask as I've never used them before and so don't want to be scammed. I've seen various posts reporting different website address urls and so wanted to check.

I take it they are a reputable company?

been running 4 T1 for some time and similar HW count tried all the settings and still high numbers, otherwise pool side hash rate is correct...dunno must be a Inno thing

I have 10 fan models at home.

I have one that does 4000 rpm at 100%.

I will swap it in and see how that works.

I remembered why I don’t buy a lot of innosilicon as there is no fan control

Just 100%.  Ie shit firmware.

And they do not like giving ssh passwords out.

For me I can tell I don’t need 100% on balanced most likely 75% would work.

My gear also has a weak board..

But it came on time and it’s mining.

here is efficiency+ which is second lowest setting  1757 watts at about 30th  or 58.6 watts a th

---

---

i am trying lowest setting as my fan swap  was a fail.

I am interested if efficiency goes under 1700 watts

---

all of below was a fail  so back to stock fan

I swapped in this fan

https://www.ebay.com/itm/Delta-AFB1212SHE-120mm-x-38mm-4-Pin-PWM-Fan-Server-Case-Water-Cooling-151-CFM/254255571182?

I set gear to lowest setting of efficiency I will post results.

note it will still run at 100% but with a fan that does 4000 rpm and uses only 1,6 amps at 100 %

the stock fan does 3.12 amps and is the abc model dbpj1238b2g

this is a savings of 18 watts a fan 36 watts for 2 fans but you will not get to run at top speeds since gear will over heat.

Yea, my T2T 30T arrived today, fans are 100% no matter the setting. 17 settings in all on the UI only tired the main four so far.

Okay got my t3t 39th model today.

set it to Factory settings and it is doing around 39th on factory setting.

still audio tuning  have to wait a bit.

one board is not fond of this setting as it drops tons and tons and tons of HW's

watts are  2378  for about 37 th or 64 watts a th so so frankly I may have rushed test so say 38 th and 2378 watts = 62 watts a th

---

Switched to balance rather than factory and power dropped to 2050 watts  waiting for it to tune 2050 watts is a lot better then 2378.

edit 2070 watts 32.5 to 33.6 on balanced   this is a bit better then an m10 on top speed.  not 100% fan settings these do not surprise me  not needed in balanced fans should be 80%   since the watts are 300 lower  this is simply a waste of power on the part of innosilicon  note the  temps are much lower then called for on the balanced setting

---

So efficiency + setting dropped me to 1757 watts and 30th

Fucking fans still 100%

I will let  this settle in so 58 watts a th is meh.

Not as good as my t17
not as good as my m20s
not as good as my s17

At this point all my gear is in house other then the innosilicon t57

This was a t39 model and the specs and listing for the t39 have vanished on their website.

But as I recall it is not spec or even 10% of spec.

That is very typical of them less hash and more power per gh is very common when you buy from them.

But they tend to keep working and don’t break.

It is so far off spec I think I am not going to buy a 57t
I will wait on the order for the t50 to arrive in August.
And we will mine and hold for two months or more.

I think I will order 1 of these from you.

I think I will order 1 m20 from pangolin.

I will have staggered deliveries

Inno t39 due this week

Inno t50 due in aug six months PayPal

Inno t57 due in sept six months PayPal

Avalon a1041 due in oct.

Whatsminer m20 due in nov.

It’s a plan.

I'm happy with my T39t. Had to order the 57t.
They claim efficiency as high as 46w/th.

I like the specs, Perfect size for 20a circuit, doesn't get much better than that, and with the September delivery.