Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1282. (Read 5352429 times)

Quote from: micky123 on August 10, 2016, 01:47:16 PM

So,

I am a noob miner and trying out some stuff before i buy the S9 (hopefully)!

Hw do payouts happen on this pool, i can't seem to find a section for payouts... do these payouts happen automatically at some point in the day?

Quote from: wolfen on August 10, 2016, 06:13:30 PM

I did see that page, but i have not had a payout for the last 3 days and i can see the blocks have already matured, so not sure why the payments have not been sent!

Your rewards are clearly listed on the Account->Rewards page, that you know doubt have seen.

You started mining for the first time 3 days ago.
That point would have made it easier for anyone to understand your question

Your first 3 rewards 424284..304 were dust.
The next 7 were not dust 424322...424420 and have been sent to you, in the last 3 days, so there must be a problem with your wallet.
The next one 424475, was dust again.

The next 4 have not yet matured, as it shows on the Blocks page, but the first one of them is again dust, the other 3 are above dust.

I believe to avoid dust you need about 2th correct?

2th is a pair of s-5's. Maybe we can place a dust warning somewhere.

Please mine above 2th to avoid dust.

Stay above ? th to avoid dust! As dust is not paid out.

Make a high safe number as I really think 1.3th is good so round up to the next th which is 2th.

Hard to code above the rewards page? Or easy?

Balduin

newbie

Activity: 14

Merit: 0

Transparency is a big plus. You can monitor your miners using the Kano website.

The website and statistsics are looking simple but they are WORKING at kano! try to look up something at BTCC..... it looks fancy but many times the stats need minutes to load or its down.

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Quote from: sugarwookie on August 10, 2016, 06:57:34 PM

Thanks glad to be here! hoping to get my hands on a few more S7s while prices are low.
Thats a lot of BTC, hope to get there eventually Grin

That's just how many coins I have been paid out by the pool since joining in mid April. Lots has been spent on miners, equipment and has been cashed out.
You'll get there best of luck!

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: micky123 on August 10, 2016, 09:12:29 PM

Quote from: micky123 on August 10, 2016, 01:47:16 PM

So,

I am a noob miner and trying out some stuff before i buy the S9 (hopefully)!

Hw do payouts happen on this pool, i can't seem to find a section for payouts... do these payouts happen automatically at some point in the day?

Quote from: VRobb on August 10, 2016, 10:08:10 PM

I did see that page, but i have not had a payout for the last 3 days and i can see the blocks have already matured, so not sure why the payments have not been sent!

Your rewards are clearly listed on the Account->Rewards page, that you know doubt have seen.

You started mining for the first time 3 days ago.
That point would have made it easier for anyone to understand your question

Your first 3 rewards 424284..304 were dust.
The next 7 were not dust 424322...424420 and have been sent to you, in the last 3 days, so there must be a problem with your wallet.
The next one 424475, was dust again.

The next 4 have not yet matured, as it shows on the Blocks page, but the first one of them is again dust, the other 3 are above dust.

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Quote from: micky123 on August 10, 2016, 09:12:29 PM

Quote from: micky123 on August 10, 2016, 01:47:16 PM

So,

I am a noob miner and trying out some stuff before i buy the S9 (hopefully)!

Hw do payouts happen on this pool, i can't seem to find a section for payouts... do these payouts happen automatically at some point in the day?

Quote from: micky123 on August 10, 2016, 09:12:29 PM

I did see that page, but i have not had a payout for the last 3 days and i can see the blocks have already matured, so not sure why the payments have not been sent!

What's your hashrate? I assume you setup a valid account or are mining directly to a bitcoin address, so if your hashrate isn't high enough you'll only generate dust (<0.0001btc) and that won't get paid until, maybe, some time in the far future (sysop's words, not mine!)

It looks like micky123 has 10.50THs on the Pool Stats page...that should be pretty good...

EDIT: Did we lose 17JVLWMAk? The pool has dropped about 10PH... Huh

VRobb

hero member

Activity: 1610

Merit: 538

I'm in BTC XTC

Quote from: micky123 on August 10, 2016, 01:47:16 PM

So,

I am a noob miner and trying out some stuff before i buy the S9 (hopefully)!

Hw do payouts happen on this pool, i can't seem to find a section for payouts... do these payouts happen automatically at some point in the day?

I did see that page, but i have not had a payout for the last 3 days and i can see the blocks have already matured, so not sure why the payments have not been sent!

What's your hashrate? I assume you setup a valid account or are mining directly to a bitcoin address, so if your hashrate isn't high enough you'll only generate dust (<0.0001btc) and that won't get paid until, maybe, some time in the far future (sysop's words, not mine!)

micky123

legendary

Activity: 1022

Merit: 1005

Quote from: micky123 on August 10, 2016, 01:47:16 PM

So,

I am a noob miner and trying out some stuff before i buy the S9 (hopefully)!

Hw do payouts happen on this pool, i can't seem to find a section for payouts... do these payouts happen automatically at some point in the day?

Quote from: sorry2xs on August 10, 2016, 07:46:39 PM

I did see that page, but i have not had a payout for the last 3 days and i can see the blocks have already matured, so not sure why the payments have not been sent!

VRobb

hero member

Activity: 1610

Merit: 538

I'm in BTC XTC

And a block! GLORYtrading cracking another one, huzzah!

jstew

sr. member

Activity: 469

Merit: 500

Quote from: jstew on August 10, 2016, 07:19:37 PM

Quote from: kano on August 10, 2016, 06:25:52 PM

Quote from: jstew on August 10, 2016, 07:19:37 PM

quick question do i need to use a different port on my sp31's , i just recently got them and put them on the pool but hashrate jumps up and down wildly on them , as much as 1.5th per unit

all my other miners s7/neptunes/s4's,sp20's,s3's and s2's all stay fairly stable

There's no difference for an sp31 vs any of the others you have.

If it's changing a lot, that could just be variance and the miner showing a short time frame for the hash rate?
On the web site, on the Workers->Shift Graph page, you can view single workers also, to get an ~5 day view of their performance.
Just make sure it has it's own worker name, then you can do that.

Another possibility is that it's temperature related and it's an overheat, cool down, cycle.
The graph should show that pretty clearly after a while.

they have been on the pool for about a week now , ill check the miner itself to see if it is heat related , if it is im sure i just need to reapply thermal paste to the heatsinks , thanks to spoons crappy design that alows the heatsink to bounce up and down on the chips during shipping

other then that im pretty sure its not heat related my avg temp across all miners is about 38*c

from first hand experience 38c for an sp 31 is too high and would constantly power cycle and also if humidity is high it would also cycle due to a lot of data corruption errors which are viewable under the events tab, on the other hand the sp20s would work until they practically melt down. Shocked

im not sure what the actual temp on my sp31's is i havent even checked yet but they are in the same racks as everything else but 38 is what most of the bitmain stuff is running at and i know thats cool for that stuff , the only thing i have noticed so far is when i first power them on they like to reset 1-2 times and then they just hum along . when i head over to my dc tonight ill check all the status pages and see what they say

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: kano on August 10, 2016, 06:25:52 PM

Quote from: kano on August 10, 2016, 06:25:52 PM

quick question do i need to use a different port on my sp31's , i just recently got them and put them on the pool but hashrate jumps up and down wildly on them , as much as 1.5th per unit

all my other miners s7/neptunes/s4's,sp20's,s3's and s2's all stay fairly stable

There's no difference for an sp31 vs any of the others you have.

If it's changing a lot, that could just be variance and the miner showing a short time frame for the hash rate?
On the web site, on the Workers->Shift Graph page, you can view single workers also, to get an ~5 day view of their performance.
Just make sure it has it's own worker name, then you can do that.

Another possibility is that it's temperature related and it's an overheat, cool down, cycle.
The graph should show that pretty clearly after a while.

they have been on the pool for about a week now , ill check the miner itself to see if it is heat related , if it is im sure i just need to reapply thermal paste to the heatsinks , thanks to spoons crappy design that alows the heatsink to bounce up and down on the chips during shipping

other then that im pretty sure its not heat related my avg temp across all miners is about 38*c

from first hand experience 38c for an sp 31 is too high and would constantly power cycle and also if humidity is high it would also cycle due to a lot of data corruption errors which are viewable under the events tab, on the other hand the sp20s would work until they practically melt down. Shocked

jstew

sr. member

Activity: 469

Merit: 500

quick question do i need to use a different port on my sp31's , i just recently got them and put them on the pool but hashrate jumps up and down wildly on them , as much as 1.5th per unit

all my other miners s7/neptunes/s4's,sp20's,s3's and s2's all stay fairly stable

There's no difference for an sp31 vs any of the others you have.

If it's changing a lot, that could just be variance and the miner showing a short time frame for the hash rate?
On the web site, on the Workers->Shift Graph page, you can view single workers also, to get an ~5 day view of their performance.
Just make sure it has it's own worker name, then you can do that.

Another possibility is that it's temperature related and it's an overheat, cool down, cycle.
The graph should show that pretty clearly after a while.

they have been on the pool for about a week now , ill check the miner itself to see if it is heat related , if it is im sure i just need to reapply thermal paste to the heatsinks , thanks to spoons crappy design that alows the heatsink to bounce up and down on the chips during shipping

other then that im pretty sure its not heat related my avg temp across all miners is about 38*c

sugarwookie

newbie

Activity: 7

Merit: 0

Thanks glad to be here! hoping to get my hands on a few more S7s while prices are low.
Thats a lot of BTC, hope to get there eventually Grin

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4