my batch 2 s-9's are shipped. so the solar array will go from 25th to 50 th . I am hoping the new fans ordered will help to keep the gear a bit cooler.
Mine too
Can't wait to plug them to kano.is
My S9 Batch 3 is up and running on kano.is...the speed and HW errors of each board were looking good and holding right at 12.87 THs (13THs on the pool) for about 45 minutes. The temps on each board were about 57, 87 and there were only about 3 errors on each board. Then the 3rd board dropped to zero and eventually dropped out of the picture. Now I have about 8.3THs total running with the first 2 boards. Soft reboots have not revived that dead board yet. I may have one of those with a faulty board and I have Toomim looking into it for me...
that sucks. as always try a lower freq.
Thanks Phil, I lowered the frequency to 550 and that board came back to life...whew! It doesn't seem to like running at 600. I'm going to let it stabilize overnight before I do anything else to it. In the morning I'll try different frequencies to see how close I can get back to 600. It's holding right at 12.66THs on the Kano pool at the moment but it's only been running about 30 minutes so far.
EDIT: It is now up to 12.97THs on the Kano pool...if it stays like that overnight then maybe a frequency of 550 will be alright!
The specs for an S9 Batch 3 is 12.93TH/s ±5% That ±5% hashing range is 12.18THs and 13.58THs so even at a lower frequency it's right in the mix there. The HW error rate is 0.0008% so that is looking great!fast guess is the psu runs out of gas at the 600 setting. do you know what the psu is?
back to the blocks we are so close to going to:
" a lighter shade of pale" when it comes to the blocks So we need four more block to come very: fast and furious.
IF we pop 4 blocks in under 90 minutes we will get to that perfectly pale green we all love to see.
