KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1400.

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Resistance is futile.... Tongue

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Wow wow wee!

Waking up this morning to see 8 BLOCKS!

I share Philip good mood

Luminous green dash board and yummy payments in queue - who can complain!

After a massive RED block -- our pool always doesn't disappoint and give us a good rebound!

Hmmmm.... usually after great results like this.... you will see a few big miners coming to visit our pool.

Afternote: Juvia whispered in my ear that I need to bump up my 5ND... greedy girl this Juvia.

ss200

full member

Activity: 269

Merit: 100

The Protocol for the Audience Economy

I'm happy

philipma1957

legendary

Activity: 4354

Merit: 9201

'The right to privacy matters'

Waiting on 7 payments so nice to be a miner in NJ,USA.

Now guys & girls lets all chant a bit to see if we can max the green!!

I want perfectly pale green Grin

generalt

legendary

Activity: 1096

Merit: 1021

Quote from: clgrissom3 on June 19, 2016, 03:51:10 PM

Block by Buransla, with his 5th Kano Block! That is our 8th block today for Father's Day! Cheesy

Another one with good fees at 0.56113217!

Definitely makes Father's Day more enjoyable. Happy Father's Day to all the fathers out there!

CryptoBuddha

full member

Activity: 233

Merit: 100

reality is what you think it is

philipma1957 started the block party meditation and then i told you Wink

Quote from: CryptoBuddha on June 18, 2016, 03:30:15 PM

Quote from: philipma1957 on June 18, 2016, 03:13:02 PM

"Can you feel it coming in the air hold on"
I am mediating on it right now Ohmmmmm!!

Hold on! Im joining the summer block meditation right now and it will be rewarded soon. CryptoBuddha says. Cool

Ohmmmmm!!

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Almost all PERFECT GREEN! Cheesy

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Block by Buransla, with his 5th Kano Block! That is our 8th block today for Father's Day! Cheesy

Another one with good fees at 0.56113217!

wmabern

hero member

Activity: 658

Merit: 500

Visualize whirledps

Quote from: E on June 19, 2016, 02:36:00 PM

Quote from: clgrissom3 on June 19, 2016, 02:03:04 PM

Block by ginex! Welcome to the Acclaim Board with your first Kano Block! Cheesy

That is our 7th of the day! Rolling! Cheesy

Sitting at 0.01CDF for last 5 blocks!

Love it!
Now for another quickie on top of that! Grin

E

full member

Activity: 234

Merit: 100

Quote from: clgrissom3 on June 19, 2016, 02:03:04 PM

Block by ginex! Welcome to the Acclaim Board with your first Kano Block! Cheesy

That is our 7th of the day! Rolling! Cheesy

Sitting at 0.01CDF for last 5 blocks!

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Block by ginex! Welcome to the Acclaim Board with your first Kano Block! Cheesy

That is our 7th of the day! Rolling! Cheesy

Edit: This block was 26.02737036! Holy cow! Shocked

philipma1957

legendary

Activity: 4354

Merit: 9201

'The right to privacy matters'

It is hot today and we are getting heat creep at the solar array

75 pcb - 105chip

will clock down to freq 550

firetreeactual

legendary

Activity: 952

Merit: 1003

Quote from: xxcsu on June 19, 2016, 11:32:15 AM

Quote from: firetreeactual on June 19, 2016, 10:51:05 AM

Quote from: xxcsu on June 19, 2016, 10:20:29 AM

What a great Sunday

6 blocks already , BTC price is going up

My S9s hashing on kano

what else i can wish for today ?
MORE BLOCKS Grin

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
11h20m15s 14,207.28 14,236.85 0 2,139,706 18.56 198,957.04 615175325

Chain#   ASIC#   Frequency   GH/S(RT) HW     Temp(PCB)    Temp(Chip)
1 63 650 4747.25 13 58 91
3 63 650 4732.72 14 58 88
4 63 650 4717.32 44 59 89

S9 batch 1 / 2

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
18h47m37s 14,007.62 14,092.26 0 3,508,591 19.02 198,383.73 103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)    Temp(Chip)
1 63 650 4705.24 28 58 87
3 63 650 4710.14 28 58 90
4 63 650 4592.24 366 65 95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! Cool

"Board/chip temps at 65/95 are out of parameter" ,
I dont think you are right on this one

maybe im wrong ... in my past experience is , i got the best hashing power when my miners was running around 60-65C. Always try to keep them in that temp range . i would say 70C is still absolutely safe for the board , core temp for the chips can go around 100C without any problem , lower is better of course

What I meant was that they were not in line with the other components' temps. It's moot now as Philipma's post explained it.

xxcsu

hero member

Activity: 1498

Merit: 597

Quote from: firetreeactual on June 19, 2016, 10:51:05 AM

Quote from: xxcsu on June 19, 2016, 10:20:29 AM

What a great Sunday

6 blocks already , BTC price is going up

My S9s hashing on kano

what else i can wish for today ?
MORE BLOCKS Grin

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
11h20m15s 14,207.28 14,236.85 0 2,139,706 18.56 198,957.04 615175325

Chain#   ASIC#   Frequency   GH/S(RT) HW     Temp(PCB)    Temp(Chip)
1 63 650 4747.25 13 58 91
3 63 650 4732.72 14 58 88
4 63 650 4717.32 44 59 89

S9 batch 1 / 2

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
18h47m37s 14,007.62 14,092.26 0 3,508,591 19.02 198,383.73 103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)    Temp(Chip)
1 63 650 4705.24 28 58 87
3 63 650 4710.14 28 58 90
4 63 650 4592.24 366 65 95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! Cool

"Board/chip temps at 65/95 are out of parameter" ,
I dont think you are right on this one

maybe im wrong ... in my past experience is , i got the best hashing power when my miners was running around 60-65C. Always try to keep them in that temp range . i would say 70C is still absolutely safe for the board , core temp for the chips can go around 100C without any problem , lower is better of course

delicin33

full member

Activity: 143

Merit: 100

Quote from: CryptoBuddha on June 18, 2016, 04:27:07 PM

Quote from: citronick on June 18, 2016, 09:54:32 AM

After learning about 5ND and experiencing it in action, I never turned back.

The 5ND method is one of the best systems for steady mining i guess, as far as im not in a way an expert, but i proved for myself that it worked better for my s7's that were working simultaneously at 4 different pools for a week or so.

This 5ND thing is fantastic, i shut down the miners from 1540 to 1710 (UTC+8) to connect & energize new power line (240v 3PH 40A Cool

) to the miners' room, my "N Avg/ miner rewards" only dropped about 5% for today's 6 blocks.

And i notice each time Kano restart the CKDB , we have blocks party Grin

AmbH

newbie

Activity: 15

Merit: 0

Quote

I have them clocked at 587 and 600 at the moment.

My thread on my 2 batch 1's
https://bitcointalksearch.org/topic/pair-of-s-9s-now-running-photos-are-up-1512186

Ok - that is seriously impressive. Mind spinning with ideas...thanks for sharing your setup and so much detailed information on your experience.

philipma1957

legendary

Activity: 4354

Merit: 9201

'The right to privacy matters'

Quote from: AmbH on June 19, 2016, 09:14:38 AM

Looks like you are getting 13Th/s on average on each of your S-9s. I thought they were designed to run at 14Th/s?

I have them clocked at 587 and 600 at the moment.

My thread on my 2 batch 1's
https://bitcointalksearch.org/topic/pair-of-s-9s-now-running-photos-are-up-1512186

We are waiting for 2 batch 2's

we will access the heat when they are put in.

I think in the summer we will do about 587 to 625 clocks.

firetreeactual

legendary

Activity: 952

Merit: 1003

Quote from: xxcsu on June 19, 2016, 10:20:29 AM

What a great Sunday

6 blocks already , BTC price is going up

My S9s hashing on kano

what else i can wish for today ?
MORE BLOCKS Grin

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
11h20m15s 14,207.28 14,236.85 0 2,139,706 18.56 198,957.04 615175325

Chain#   ASIC#   Frequency   GH/S(RT) HW     Temp(PCB)    Temp(Chip)
1 63 650 4747.25 13 58 91
3 63 650 4732.72 14 58 88
4 63 650 4717.32 44 59 89

S9 batch 1 / 2

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
18h47m37s 14,007.62 14,092.26 0 3,508,591 19.02 198,383.73 103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)    Temp(Chip)
1 63 650 4705.24 28 58 87
3 63 650 4710.14 28 58 90
4 63 650 4592.24 366 65 95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! Cool

philipma1957

legendary

Activity: 4354

Merit: 9201

'The right to privacy matters'

Quote from: xxcsu on June 19, 2016, 10:20:29 AM

What a great Sunday

6 blocks already , BTC price is going up

My S9s hashing on kano

what else i can wish for today ?
MORE BLOCKS Grin

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
11h20m15s 14,207.28 14,236.85 0 2,139,706 18.56 198,957.04 615175325

Chain#   ASIC#   Frequency   GH/S(RT) HW     Temp(PCB)    Temp(Chip)
1 63 650 4747.25 13 58 91
3 63 650 4732.72 14 58 88
4 63 650 4717.32 44 59 89

S9 batch 1 / 2

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
18h47m37s 14,007.62 14,092.26 0 3,508,591 19.02 198,383.73 103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)    Temp(Chip)
1 63 650 4705.24 28 58 87
3 63 650 4710.14 28 58 90
4 63 650 4592.24 366 65 95

this is due to one blade have a different heat sink then the other 2 blades. this is done to fit the blades in the case

xxcsu

hero member

Activity: 1498

Merit: 597

What a great Sunday

6 blocks already , BTC price is going up

My S9s hashing on kano

what else i can wish for today ?
MORE BLOCKS Grin

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
11h20m15s 14,207.28 14,236.85 0 2,139,706 18.56 198,957.04 615175325

Chain#   ASIC#   Frequency   GH/S(RT) HW     Temp(PCB)    Temp(Chip)
1 63 650 4747.25 13 58 91
3 63 650 4732.72 14 58 88
4 63 650 4717.32 44 59 89

S9 batch 1 / 2

Elapsed     GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU     BestShare
18h47m37s 14,007.62 14,092.26 0 3,508,591 19.02 198,383.73 103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)    Temp(Chip)
1 63 650 4705.24 28 58 87
3 63 650 4710.14 28 58 90
4 63 650 4592.24 366 65 95

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1400. (Read 5352429 times)