Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1724. (Read 5352367 times)
February 11, 2016, 10:37:29 PM
Block again! nhando hits his 2nd at kano.is! Thank you, thank you!
February 11, 2016, 10:30:39 PM
Grats David!
It always feels good to have another notch in your belt I'm sure.
How many amps are you using these days?
It always feels good to have another notch in your belt I'm sure.
How many amps are you using these days?
Only 40,300 watts with the fans included (167.92 Amps); which is nothing compared to a lot of others. I have a 225 Amp main breaker. I ended up not upgrading the power here at the house after the power company also wanted to charge me $4,200 on top of my cost for the materials and labor for electrician. I was also going to have to rent a trencher or pay someone to trench 191 feet. I told him I will get back with him after I think about it a while.
February 11, 2016, 10:24:01 PM
Grats David!
It always feels good to have another notch in your belt I'm sure.
How many amps are you using these days?
It always feels good to have another notch in your belt I'm sure.
How many amps are you using these days?
February 11, 2016, 10:18:22 PM
Congratz!
Morning and congrats on your first block here. Thank you!
Thanks!
EDIT: Best share on that one was 206,405,991,633 but the S7 did not say a block was found. Could only tell by the value of the best share.
February 11, 2016, 10:17:03 PM
Congrats David on your first BLOCK! Can we get a Triple SLAM, WHAM BAM THANK U MAM?
Wonder where he is? Haven't seen him post in a while. Congrats all the same to him, and all other block finders!
Thanks! I just woke up.
My first on THIS pool. I wish I stayed here when the pool first began. I'm not leaving this pool ever again. Congratz!
February 11, 2016, 10:11:25 PM
Congrats David on your first BLOCK! Can we get a Triple SLAM, WHAM BAM THANK U MAM?
Wonder where he is? Haven't seen him post in a while. Congrats all the same to him, and all other block finders!
Thanks! I just woke up.
My first on THIS pool. I wish I stayed here when the pool first began. I'm not leaving this pool ever again. Morning and congrats on your first block here. Thank you!
February 11, 2016, 10:05:54 PM
Congrats David on your first BLOCK! Can we get a Triple SLAM, WHAM BAM THANK U MAM?
Wonder where he is? Haven't seen him post in a while. Congrats all the same to him, and all other block finders!
Thanks! I just woke up.
My first on THIS pool. I wish I stayed here when the pool first began. I'm not leaving this pool ever again. 
February 11, 2016, 10:02:31 PM
Congrats David on your first BLOCK! Can we get a Triple SLAM, WHAM BAM THANK U MAM?
Wonder where he is? Haven't seen him post in a while. Congrats all the same to him, and all other block finders!
February 11, 2016, 09:50:50 PM
At our current pool hash rate. It is expected to have 4 blocks a day now as we're at 10% at 37 Mins.
February 11, 2016, 09:45:37 PM
why not go extreme 10!!!!!!!! 
The more we can get now before this next crazy difficulty jump the better! Of course more blocks after the jump too.
February 11, 2016, 09:36:05 PM
why not go extreme 10!!!!!!!!
six is fine. but if the universe of BTC wants to give us 10 that would be finer!
February 11, 2016, 09:31:30 PM
Three in less then three hours is...wonderful!!!
this already constitutes a great Friday(with 21 hrs to spare...
this already constitutes a great Friday(with 21 hrs to spare...
February 11, 2016, 09:23:23 PM
why not go extreme 10!!!!!!!!
February 11, 2016, 09:17:09 PM
Nice start for block friday.
looking forward to a 5 or 6 block day.
looking forward to a 5 or 6 block day.
February 11, 2016, 09:14:42 PM
Block! Block Friday is on a roll!
bitminerpro killing it as usual
February 11, 2016, 09:14:02 PM
Book it!
February 11, 2016, 09:13:04 PM
Block! Block Friday is on a roll! Thank you bitminerpro for hitting your 100 and 11th block at kano.is!
February 11, 2016, 09:12:53 PM
BLOCK
February 11, 2016, 09:05:37 PM
Dear friend
Forgive me for asking stupid questions, im looking for advice..
Since im from non english native language, ive been having language barrier to learn in detail about bitcoin..
My hashing power is not much (100pcs of s5, 13s3+, 8s7 in mix batch ),
but all pointing to antpool, because..
Antpool is easy to understand, and easy setting for newbie
Also easy to spot inactive worker (i dont understand but ocassionally the miners have to be reset)
antpool do have easy to see per-worker related attendance,
1. do CKPOOL can see per-worker online and offline status?
(To see the offline.. This is most important to spot which miner in error)
2. Can anyone teach me how to setting miner configuration? As easy as changing stratum address?
3. Are there any other setting should i follow? Such PPS or PPLNS also why there is "-u" on stratum address?
Which one should i use??
4. So CKPOOL is the same or different from KANO.IS? Which one is CKPOOL?
5. So we at CK/Kano is more profitable than antpool and f2pool?
So sorry for more stupid questions
6. Are you guys in profit?
Because somehow im feeling loss.. do we suppose to sell the coins for monthly cost or we should hoard until grandson born (not even have a kid yet..) haha..
The network difficulties is CRAZY, its difficult for me to cover the miner and PSU cost, not to mention monthly cost..
wondering where did i do wrong, or if f2pool and antpool kill me slowly
You are mining at antpool - that's your first, biggest mistake ...Forgive me for asking stupid questions, im looking for advice..
Since im from non english native language, ive been having language barrier to learn in detail about bitcoin..
My hashing power is not much (100pcs of s5, 13s3+, 8s7 in mix batch ),
but all pointing to antpool, because..
Antpool is easy to understand, and easy setting for newbie
Also easy to spot inactive worker (i dont understand but ocassionally the miners have to be reset)
antpool do have easy to see per-worker related attendance,
1. do CKPOOL can see per-worker online and offline status?
(To see the offline.. This is most important to spot which miner in error)
2. Can anyone teach me how to setting miner configuration? As easy as changing stratum address?
3. Are there any other setting should i follow? Such PPS or PPLNS also why there is "-u" on stratum address?
Which one should i use??
4. So CKPOOL is the same or different from KANO.IS? Which one is CKPOOL?
5. So we at CK/Kano is more profitable than antpool and f2pool?
So sorry for more stupid questions
6. Are you guys in profit?
Because somehow im feeling loss.. do we suppose to sell the coins for monthly cost or we should hoard until grandson born (not even have a kid yet..) haha..
The network difficulties is CRAZY, its difficult for me to cover the miner and PSU cost, not to mention monthly cost..
wondering where did i do wrong, or if f2pool and antpool kill me slowly
1. Use one of the apps/or ZACH's web site
2. It's on the web page ... https://kano.is/
3. It's only PPLNS - no settings
4. CKPool is software - kano.is is a pool - solo.ckpool.org is a pool.
CKPool is the best pool software in performance.
Our pool implementations are also the BEST for bitcoin.
We average the biggest blocks of all pools and the fastest block changes without SPV mining.
We don't SPV mine, since we expect Bitcoin will last a long time, we don't do shit that assumes Bitcoin wont be here tomorrow.
5. So far yes
6. That's to do with your hardware and electricity.
High J/W hardware and expensive electricity will help you lose a lot more
The pool counts in % reward vs other pools ... which has so far averaged higher here for a long time.
February 11, 2016, 09:01:20 PM
Dear friend
Forgive me for asking stupid questions, im looking for advice..
Since im from non english native language, ive been having language barrier to learn in detail about bitcoin..
My hashing power is not much (100pcs of s5, 13s3+, 8s7 in mix batch ),
but all pointing to antpool, because..
Antpool is easy to understand, and easy setting for newbie
Also easy to spot inactive worker (i dont understand but ocassionally the miners have to be reset)
antpool do have easy to see per-worker related attendance,
1. do CKPOOL can see per-worker online and offline status?
(To see the offline.. This is most important to spot which miner in error)
2. Can anyone teach me how to setting miner configuration? As easy as changing stratum address?
3. Are there any other setting should i follow? Such PPS or PPLNS also why there is "-u" on stratum address?
Which one should i use?? (Hope there is DUMMY GUIDEfor me)
4. So CKPOOL is the same or different from KANO.IS? Which one is CKPOOL?
5. So we at CK/Kano is more profitable than antpool and f2pool?
So sorry for more stupid questions
6. Are you guys in profit?
Because somehow im feeling loss.. do we suppose to sell the coins for monthly cost or we should hoard until grandson born (not even have a kid yet..) haha..
The network difficulties is CRAZY, its difficult for me to cover the miner and PSU cost, not to mention monthly cost..
wondering where did i do wrong, or if f2pool and antpool kill me slowly
Forgive me for asking stupid questions, im looking for advice..
Since im from non english native language, ive been having language barrier to learn in detail about bitcoin..
My hashing power is not much (100pcs of s5, 13s3+, 8s7 in mix batch ),
but all pointing to antpool, because..
Antpool is easy to understand, and easy setting for newbie
Also easy to spot inactive worker (i dont understand but ocassionally the miners have to be reset)
antpool do have easy to see per-worker related attendance,
1. do CKPOOL can see per-worker online and offline status?
(To see the offline.. This is most important to spot which miner in error)
2. Can anyone teach me how to setting miner configuration? As easy as changing stratum address?
3. Are there any other setting should i follow? Such PPS or PPLNS also why there is "-u" on stratum address?
Which one should i use?? (Hope there is DUMMY GUIDEfor me)
4. So CKPOOL is the same or different from KANO.IS? Which one is CKPOOL?
5. So we at CK/Kano is more profitable than antpool and f2pool?
So sorry for more stupid questions
6. Are you guys in profit?
Because somehow im feeling loss.. do we suppose to sell the coins for monthly cost or we should hoard until grandson born (not even have a kid yet..) haha..
The network difficulties is CRAZY, its difficult for me to cover the miner and PSU cost, not to mention monthly cost..
wondering where did i do wrong, or if f2pool and antpool kill me slowly
1. Yes, you can if you go to here: https://kano.is/index.php?k=workers. I think if you use ZACHM's monitor site you can see more. I don't use it since I have just 1 worker so maybe check here: https://bitcointalksearch.org/topic/kanopool-monitor-hashrates-workers-rewards-and-notifications-for-kanpool-1331875
2, 3. Changing miner config is easy. Just change the stratum address to stratum.kano.is:3333 and put the username as: yourusename.workername. So for example san2salim.S71, san2salim.S72, etc... for password you can just put 'x' You can mine to a bitcoin address, but if you want worker information you need to have a username.
4. kani.is uses ckpool
5. If you look historically, yes it is much more profitable. BUT no one can tell the future. One thing that is for sure is that kano and ck are a good thing for bitcoin, and bitmain/f2pool/etc... are not. There are a bunch of posts about why (even just a few pages back).
6. Yes I am very much in profit, and honestly I wouldn't be at any other pool. The big thing to notice is that we use the 5nd system. Again this is talked about a lot and maybe someone can link the posts if they have time.
Jump to: