Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 177. (Read 5352229 times)

member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
Kano/others:

Did anyone else notice that it doesn't seem like the Shifts & Shift Graph are updating?
full member
Activity: 350
Merit: 158
#takeminingback
Dance for that BTClock!!! Dance!!!

newbie
Activity: 5
Merit: 0
is the S9 and/or S9i compatible with asicboost?
cant find positive news anywhere.

Existing equipment will continue to work the same after Kano works out the problems with asicboost in the pool code.  It will be an added feature to allow those asicboost-only machines to work...not a restriction on existing equipment.

Hi, thanks for expanation.
I didnt ask out of fear of restrictions, but more curious if it would improve performance of the S9 / S9i as well.

Anyone knows if a firmware upgrade would do the trick?
Or is asicboosted equipment just that; asicboost only, specially manufactured?


Embedded AsicBoost is available only in DragonMint's T1... to use AsicBoost companies need to join the Blockchain Defensive Patent License (BDPL). Currently, there are only 3 known companies.  (Halon Mining, Little Dragon, QRF Solutions)
member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
Alright, folks, were at 100%, so I 'expect' a block any second now!

Get those dancin' shoes ready, Rifleman!!! Grin
copper member
Activity: 658
Merit: 101
Math doesn't care what you believe.

Hi, thanks for expanation.
I didnt ask out of fear of restrictions, but more curious if it would improve performance of the S9 / S9i as well.

Anyone knows if a firmware upgrade would do the trick?
Or is asicboosted equipment just that; asicboost only, specially manufactured?

So far, everything released that I'm aware of is ASICBoost Only.  Technically it would be possible to design a system which could go either way, but turning it off would hurt performance... (and thus advertising/sales impact)
member
Activity: 434
Merit: 30
is the S9 and/or S9i compatible with asicboost?
cant find positive news anywhere.

Existing equipment will continue to work the same after Kano works out the problems with asicboost in the pool code.  It will be an added feature to allow those asicboost-only machines to work...not a restriction on existing equipment.

Hi, thanks for expanation.
I didnt ask out of fear of restrictions, but more curious if it would improve performance of the S9 / S9i as well.

Anyone knows if a firmware upgrade would do the trick?
Or is asicboosted equipment just that; asicboost only, specially manufactured?
full member
Activity: 350
Merit: 158
#takeminingback
Thank You Shazam! Yesterday I have read posts from January to April and nothing. I saw that someone sent T1 to Kano and he was supposed to test.

I have to wait to join the most honest pool.




You're Welcome. Hopefully Kano will have results soon, as many people are eager to run asicboost enabled equipment here. Kano is doing his due diligence, and making sure the coding on Poolside, is working correctly. That is important for every user here.
newbie
Activity: 5
Merit: 0
Thank You Shazam! Yesterday I have read posts from January to April and nothing. I saw that someone sent T1 to Kano and he was supposed to test.

I have to wait to join the most honest pool.

member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
Yep, mining is back now.
It was so scary when my ants switched to the 3rd failover pool at once))
D'oh! It literally just dawned on me that I could've changed my Pool 3 to something else for this outage.

It's funny how I used to have that one pointed somewhere else, but with so few "long" outages, I never saw the benefits of it.

It figures that this would be the outage that might've been beneficial... Too late now! Wink
full member
Activity: 350
Merit: 158
#takeminingback
I have DragonMint T1 and I'd like to join to the pool. I can or not? In miner logs I see cgminer error. I dont know why..
I dont have problem with cksolo pool and slush pool, maybe by Kano pool I can not join with T1??

Thanks for rewards Smiley


If you read back a few posts........



However, the new setup wont support asicboost.
I've found that ckpool doesn't actually work properly with asicboost, the node proxy setup crashes and burns, so I wont be adding asicboost to the new setup yet.
However, I've coded in and tested all the changes for KanoDB to work with or without asicboost and that will be on the new server.

With much thanks to wavelengthsf's T1 I've made sure most of the pool configuration works, and since I have 2 T1s myself now, I'll continue with the testing next week to sort out the ckpool bugs - someone clearly never tested some of their code ... Hacksville Tongue
newbie
Activity: 47
Merit: 0
Thank's Kano, great work!  Smiley
newbie
Activity: 5
Merit: 0
I have DragonMint T1 and I'd like to join to the pool. I can or not? In miner logs I see cgminer error. I dont know why..
I dont have problem with cksolo pool and slush pool, maybe by Kano pool I can not join with T1??

Thanks for rewards Smiley
full member
Activity: 233
Merit: 100
reality is what you think it is
And now the site is also back, great!


UPD:
oops, it was all working for me for about a minute and now it says "Database timeout or reloading, mining is all OK
"

UPD:
and again it's back in a minute
hero member
Activity: 723
Merit: 519
Does anyone have any coupons for S9i from bitmain?

I have 1 350 and 4 100

You plan on using them or mind parting with one? Looking to upgrade my two s7's added a few TH to the pool and my hash rate.

I have two $100 coupons for anyone on the pool that plans on buying a new miner and wants one free coupon
full member
Activity: 233
Merit: 100
reality is what you think it is
Yep, mining is back now.
It was so scary when my ants switched to the 3rd failover pool at once))
full member
Activity: 350
Merit: 158
#takeminingback

Firstly, yep still going ahead as planned in about 1hr 45 minutes or as the web site says at the top Smiley

--

However, the new setup wont support asicboost.
I've found that ckpool doesn't actually work properly with asicboost, the node proxy setup crashes and burns, so I wont be adding asicboost to the new setup yet.
However, I've coded in and tested all the changes for KanoDB to work with or without asicboost and that will be on the new server.

With much thanks to wavelengthsf's T1 I've made sure most of the pool configuration works, and since I have 2 T1s myself now, I'll continue with the testing next week to sort out the ckpool bugs - someone clearly never tested some of their code ... Hacksville Tongue


I noticed after asicboost was anounced on Flush, and company, that there were/are issues with connectivity. This may explain why.  Personally, I think it was shameful, how they rushed the whole launch of shenanigans directly into the naive hands of consumers.
Kudos to YOU, for taking the time to troubleshoot the code, before it creates issues for Kano Pool Members. Many Thanx!!! Smiley
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
is the S9 and/or S9i compatible with asicboost?
cant find positive news anywhere.

Existing equipment will continue to work the same after Kano works out the problems with asicboost in the pool code.  It will be an added feature to allow those asicboost-only machines to work...not a restriction on existing equipment.
jr. member
Activity: 50
Merit: 1
Mining since 2018
back up 27 minutes ago in the UK
member
Activity: 254
Merit: 11
Call 811 before you dig
is the S9 and/or S9i compatible with asicboost?
cant find positive news anywhere.

Um, no.
member
Activity: 434
Merit: 30
is the S9 and/or S9i compatible with asicboost?
cant find positive news anywhere.
Jump to: