If i'm not mistaken that tool for S5 and above 
ah OK thanks
tool shows options for S3 and above
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1901. (Read 5352119 times)
January 02, 2016, 01:22:36 AM
ah OK thanks
tool shows options for S3 and above
January 02, 2016, 01:11:58 AM
If i'm not mistaken that tool for S5 and above
ah OK thanks
January 02, 2016, 12:27:15 AM
If i'm not mistaken that tool for S5 and above
January 02, 2016, 12:01:38 AM
on another note.. Those of you with Bitmain equip ive found this tool.. Im not sure how long this has been available in there support section. but if you like to tweak your machine settings this would be the way to go..
https://www.bitmaintech.com/support.htm?pid=007201512210613294744rqn82k7068A
really nice tool. It may not have all the frequencies you prefer for your miner but for a quick way to downclock or over clock this is best ive seen.. Ive yet to test it whether or not you can actually adjust the voltage.. i know on s4 they fixed the volts to .725 with a firmware update. Check it out will make your life much easier if you have a decent amount of ants.
Best Regards
d57heinz
https://www.bitmaintech.com/support.htm?pid=007201512210613294744rqn82k7068A
really nice tool. It may not have all the frequencies you prefer for your miner but for a quick way to downclock or over clock this is best ive seen.. Ive yet to test it whether or not you can actually adjust the voltage.. i know on s4 they fixed the volts to .725 with a firmware update. Check it out will make your life much easier if you have a decent amount of ants.
Best Regards
d57heinz
Thanks for this tip - is there a description somewhere of what the tools do? Are they tweaks or fixes - or both perhaps?
Bitmian?
bitmian_tools-V0.16.zip
When they can't spell their company name it does not inspire confidence.
will it recover the "-" in 000000-0 for S3's?
Apart from power off/on and reboots is there any way to fix a "-" or is this chip just deceased?
You can alter freq and voltage in latest firmware (from Jan 2015) for S3's via Status/Miner Config/Advanced
January 01, 2016, 11:49:06 PM
that block is around the corner... waiting to be found.
first it hits you that the good about more pool hash is you hit 100% faster.
then the high settles down and you realize the bad is that you hit next 100% faster too.
finally you give in and check every 5Nd instead
first it hits you that the good about more pool hash is you hit 100% faster.
then the high settles down and you realize the bad is that you hit next 100% faster too.
finally you give in and check every 5Nd instead
January 01, 2016, 11:12:03 PM
Wolfpack smells a block...
Stand up and be counted for what you are about to receive
We are the miners, we'll hash out everything you needStand up and be counted for what you are about to receive
1st concert I ever went to was AC/DC's "For Those About to Rock" tour in my early teens. Time to Crack that Block!
That was my first concert as well, I saw it in Memphis TN and I was about 8-9 years old. I cannot remember the year but I am guessing around 1977-1978
Or maybe a little later (lived there until 1982)
January 01, 2016, 11:07:19 PM
Wolfpack smells a block...
Stand up and be counted for what you are about to receive
We are the miners, we'll hash out everything you needStand up and be counted for what you are about to receive
1st concert I ever went to was AC/DC's "For Those About to Rock" tour in my early teens. Time to Crack that Block!
January 01, 2016, 10:14:58 PM
Wolfpack smells a block...
Stand up and be counted for what you are about to receive
Stand up and be counted for what you are about to receive
January 01, 2016, 08:48:06 PM
Anyone have a screen shot of an S5/S7 config page filled out with registered user for this pool? I'm not home and can't access my network. Trying to help a friend configure his rigs for here and he's having a problem connecting.
Anyway, Happy New Year. Stay safe.
stratum+tcp://stratum.kano.is:3333Anyway, Happy New Year. Stay safe.
username.worker01
123
or
stratum+tcp://stratum81.kano.is:81
stratum+tcp://stratum443.kano.is:443
stratum+tcp://stratum8080.kano.is:8080
January 01, 2016, 05:04:51 PM
I think you will need to set it above what nicehash minimum is or you will get "difficulty too low" error. It will depend on your hashrate you buy I'm guessing. I just rented from there at .0046 with a max of 50TH/s and set initial difficulty to 3000, but it has since adjusted automatically to much higher.
There is nothing I can do on the NiceHash to force the difficulty. Only option is on the CKPool side, which I left at 0.
Currently, on my 9TH/s rental, worker difficulty is 8.053k.
I meant on the CKPool side. For me when I left it at 0 it gave me an error saying difficulty too low. I just upped it to 3000 and then it worked and adjusted to higher. But as long as it is working that is good! Now lets hope we get a block soon
Here's the details:
The problem with not-so-nice-hash is that they will point who knows what miners to cover your order.
Each miner pointed at the pool will get it's difficulty adjusted to 18 SPM (share per minute) but a minimum of Diff 42.
If you wish to have it higher no matter what problems there are at not-so-nice-hash and what hash rate they drop down to and cause the problem themselves, then set the "Minimum Diff" for the workers in the Workers->Management page.
(yeah not-so-nice-hash clearly have no idea what they are doing when they drop their hash rate drastically but expect the pool to not adjust the work diff downwards also ...)
Note however, that you need to mine to the worker first, to create that worker.
So the other options are: to quickly change "Minimum Diff" after the worker is created when the mining starts,
or either of:
use a worker you already have created
or create a worker with your own miners
and set the "Minimum Diff" on that/those workers before pointing not-so-nice-hash at them.
January 01, 2016, 04:40:10 PM
Pool 1
URL: stratum.kano.is:3333
Worker:.worker
Password: x
That is it.
URL: stratum.kano.is:3333
Worker:
Password: x
That is it.
January 01, 2016, 04:27:32 PM
Anyone have a screen shot of an S5/S7 config page filled out with registered user for this pool? I'm not home and can't access my network. Trying to help a friend configure his rigs for here and he's having a problem connecting.
Anyway, Happy New Year. Stay safe.
Anyway, Happy New Year. Stay safe.
January 01, 2016, 04:22:53 PM
Hmm my S2 is saying the pool is dead, anyone else having this problem ? I have failed over to ck solo pool, restarting the miner still says kano.is is dead for some reason..
I can also ping kano.is just fine..
I can also ping kano.is just fine..
Haven't received any dead miner or low hash rate warning from ckpool-monitor, so everything must be good. Just checked, all (
are alive and hashing. January 01, 2016, 04:08:49 PM
Alive for all 3 of mine.
January 01, 2016, 04:02:58 PM
Hmm my S2 is saying the pool is dead, anyone else having this problem ? I have failed over to ck solo pool, restarting the miner still says kano.is is dead for some reason..
I can also ping kano.is just fine..
I can also ping kano.is just fine..
January 01, 2016, 02:47:27 PM
I hope we find a block in 2016 - need to celebrate more
January 01, 2016, 02:25:31 PM
I think you will need to set it above what nicehash minimum is or you will get "difficulty too low" error. It will depend on your hashrate you buy I'm guessing. I just rented from there at .0046 with a max of 50TH/s and set initial difficulty to 3000, but it has since adjusted automatically to much higher.
There is nothing I can do on the NiceHash to force the difficulty. Only option is on the CKPool side, which I left at 0.
Currently, on my 9TH/s rental, worker difficulty is 8.053k.
I meant on the CKPool side. For me when I left it at 0 it gave me an error saying difficulty too low. I just upped it to 3000 and then it worked and adjusted to higher. But as long as it is working that is good! Now lets hope we get a block soon
January 01, 2016, 02:20:38 PM
I think you will need to set it above what nicehash minimum is or you will get "difficulty too low" error. It will depend on your hashrate you buy I'm guessing. I just rented from there at .0046 with a max of 50TH/s and set initial difficulty to 3000, but it has since adjusted automatically to much higher.
There is nothing I can do on the NiceHash to force the difficulty. Only option is on the CKPool side, which I left at 0.
Currently, on my 9TH/s rental, worker difficulty is 8.053k.
January 01, 2016, 02:00:50 PM
I think you will need to set it above what nicehash minimum is or you will get "difficulty too low" error. It will depend on your hashrate you buy I'm guessing. I just rented from there at .0046 with a max of 50TH/s and set initial difficulty to 3000, but it has since adjusted automatically to much higher.
January 01, 2016, 01:57:17 PM
Thanks for the answers guys. I appreciate it.
I will give it a try for a while. For the Nice Hash rental, do I need to put anything in the worker management value, or leave it at default, which is 0?
Thanks
I will give it a try for a while. For the Nice Hash rental, do I need to put anything in the worker management value, or leave it at default, which is 0?
Thanks
Jump to: