KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1966.

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: omega015 on December 09, 2015, 12:45:45 PM

Quote from: AriesIV10 on December 09, 2015, 12:27:36 PM

Can someone please help:

I would like to point some miners this way, but cannot find the proper verbiage to put into my miners. It is very easy to input into Slush's by entering in the following, but can someone tell me how to write it for CKPool?

URL: stratum+tcp://us-east.stratum.bitcoin.cz:3333
Worker: username.worker1
Password: 123456

What do you write for CKPool (I have followed the instructions on CKPool and cannot get it!)

url: stratum+tcp://stratum.kano.is:3333
worker: your BTC address (or register for a kano.is account and use your username)
password: anything e.g 12345

https://kano.is/ explains everything.

Thank You VERY Much!! I am going to redirect some miners there now.

omega015

full member

Activity: 182

Merit: 100

Quote from: AriesIV10 on December 09, 2015, 12:27:36 PM

Can someone please help:

I would like to point some miners this way, but cannot find the proper verbiage to put into my miners. It is very easy to input into Slush's by entering in the following, but can someone tell me how to write it for CKPool?

URL: stratum+tcp://us-east.stratum.bitcoin.cz:3333
Worker: username.worker1
Password: 123456

What do you write for CKPool (I have followed the instructions on CKPool and cannot get it!)

url: stratum+tcp://stratum.kano.is:3333
worker: your BTC address (or register for a kano.is account and use your username)
password: anything e.g 12345

https://kano.is/ explains everything.

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: citronick on December 09, 2015, 12:35:26 PM

Quote from: hawkfish007 on December 09, 2015, 12:26:41 PM

Quote from: citronick on December 09, 2015, 12:08:42 PM

Hello kano,

Currently I have worker names setup in kano.is

If i changed my miners to use BTC id as userid, will I miss any payment due? restart my 5Nd progress?

Apologies, if the questions has obvious answers - I am still on the mining learning curve.

Thanks
TMT

See his answer to similar question a few posts above yours.

Quote from: kano on December 09, 2015, 11:27:09 AM

However, if you set the username account payout address to be the same, they will be combined in the payout since I add together amounts sent to the same address.

got it!

missed that post.

Somewhat of the same question. If I keep on adding miners to the pool, does each miner/previously added miners have to go through the 5 day ramp up?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: hawkfish007 on December 09, 2015, 12:26:41 PM

Quote from: citronick on December 09, 2015, 12:08:42 PM

Hello kano,

Currently I have worker names setup in kano.is

If i changed my miners to use BTC id as userid, will I miss any payment due? restart my 5Nd progress?

Apologies, if the questions has obvious answers - I am still on the mining learning curve.

Thanks
TMT

See his answer to similar question a few posts above yours.

Quote from: kano on December 09, 2015, 11:27:09 AM

However, if you set the username account payout address to be the same, they will be combined in the payout since I add together amounts sent to the same address.

got it!

missed that post.

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Can someone please help:

I would like to point some miners this way, but cannot find the proper verbiage to put into my miners. It is very easy to input into Slush's by entering in the following, but can someone tell me how to write it for CKPool?

URL: stratum+tcp://us-east.stratum.bitcoin.cz:3333
Worker: username.worker1
Password: 123456

What do you write for CKPool (I have followed the instructions on CKPool and cannot get it!)

hawkfish007

hero member

Activity: 895

Merit: 504

Quote from: citronick on December 09, 2015, 12:08:42 PM

Hello kano,

Currently I have worker names setup in kano.is

If i changed my miners to use BTC id as userid, will I miss any payment due? restart my 5Nd progress?

Apologies, if the questions has obvious answers - I am still on the mining learning curve.

Thanks
TMT

See his answer to similar question a few posts above yours.

Quote from: kano on December 09, 2015, 11:27:09 AM

However, if you set the username account payout address to be the same, they will be combined in the payout since I add together amounts sent to the same address.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: BlInK311 on December 09, 2015, 10:28:27 AM

I use the app too and mine doesn't crash when the db/website goes down, I just get extra block found alerts when db comes back online. So my phone told me 5-6 block finds this morning. I'm glad to see the last one was actually true.

Yea, those extra block found notices are kind of annoying. I get several on my train ride in this morning and then when I get to a computer and log in and only see 1 solved I was let down. I wish the app dev would fix it so it could tell the difference between a found block and a restart. Also wish he would change the notification sound/icon for dead miners to be different than a found block. He also still needs to add kano to the name, kano ckpool status, I think kano asked him to do that months ago when he first made the app...

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Hello kano,

Currently I have worker names setup in kano.is

If i changed my miners to use BTC id as userid, will I miss any payment due? restart my 5Nd progress?

Apologies, if the questions has obvious answers - I am still on the mining learning curve.

Thanks
TMT

omega015

full member

Activity: 182

Merit: 100

Quote from: bctmke on December 09, 2015, 11:53:39 AM

Regarding 2FA.

I just enabled mine (finally got around to doing it) using the google Authenticator app.

Worked painlessly and the QR code made it simple.

I only tried google auth once so will have to try that one again as a backup.

hawkfish007

hero member

Activity: 895

Merit: 504

Quote from: kano on December 09, 2015, 11:27:09 AM

Quote from: hawkfish007 on December 09, 2015, 11:14:18 AM

Quote from: omega015 on December 09, 2015, 11:06:43 AM

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

ooops forgot to hit post... anyway I wrote that it will take time for the 7day rate to get up to speed (1 day does seem low). Someone with more knowledge on the 5N should be able to help you with your question.

The long and the short of it is..... just keep mining here and you will soon receive full benefits

And register for access to more miner/pool stats.

If I register, will I loose the hash associated to the BTC address? It seems, user name can't be a BTC address.

It wont show the payout details of your address account in your username account.
You'll only see the details of your username account mining.

However, if you set the username account payout address to be the same, they will be combined in the payout since I add together amounts sent to the same address.

Thanks for the explanation, I registered

bctmke

sr. member

Activity: 294

Merit: 250

Regarding 2FA.

I just enabled mine (finally got around to doing it) using the google Authenticator app.

Worked painlessly and the QR code made it simple.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: hawkfish007 on December 09, 2015, 11:14:18 AM

Quote from: omega015 on December 09, 2015, 11:06:43 AM

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

ooops forgot to hit post... anyway I wrote that it will take time for the 7day rate to get up to speed (1 day does seem low). Someone with more knowledge on the 5N should be able to help you with your question.

The long and the short of it is..... just keep mining here and you will soon receive full benefits

And register for access to more miner/pool stats.

If I register, will I loose the hash associated to the BTC address? It seems, user name can't be a BTC address.

It wont show the payout details of your address account in your username account.
You'll only see the details of your username account mining.

However, if you set the username account payout address to be the same, they will be combined in the payout since I add together amounts sent to the same address.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

3 things

1) The numbers shown for address mining are the hash rate estimates from ckpool.
They are not the exact numbers used by ckdb to determine your reward.
CKDB counts shares submitted during each shift and pays all (1diff) share values the same in each payout.

2) The actual numbers shown will get close to your average hash rate over the time label after 3 times the time label
e.g. the 1hr figure should be close to your average 1hr hash rate after about 3hrs

3) The 5Nd number is displayed here: https://kano.is/index.php?k=payout
You'd have to have a user account to see the shift details.
It's currently (for the last block reward) 118hr 9m 56s 4.00PHs

You can calculate somewhere close to the time from the pool average hash rate:
To get 5Nd shares with 4PH will take 5Nd * 2^32 / 4x10^15 seconds = 424677s = ~118hrs
(close but not exact of course - but the pool average hash rate isn't obvious either)

omega015

full member

Activity: 182

Merit: 100

Quote from: hawkfish007 on December 09, 2015, 11:14:18 AM

Quote from: omega015 on December 09, 2015, 11:06:43 AM

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

ooops forgot to hit post... anyway I wrote that it will take time for the 7day rate to get up to speed (1 day does seem low). Someone with more knowledge on the 5N should be able to help you with your question.

The long and the short of it is..... just keep mining here and you will soon receive full benefits

And register for access to more miner/pool stats.

If I register, will I loose the hash associated to the BTC address? It seems, user name can't be a BTC address.

Yes username cannot be BTC address, but enter your BTC address when you register and your payout for both BTC address mining and account mining will be merged into a single payment (kano could possibly confirm). So you will not loose any reward payouts. It might just mean your account wont show full rate straight away and slightly longer to reach 5N but you will be still getting some payouts from when you was mining using your BTC address.

Maybe someone more knowledgeable can confirm this as I am new to this and my understanding might not be 100% accurate.

hawkfish007

hero member

Activity: 895

Merit: 504

Quote from: omega015 on December 09, 2015, 11:06:43 AM

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

ooops forgot to hit post... anyway I wrote that it will take time for the 7day rate to get up to speed (1 day does seem low). Someone with more knowledge on the 5N should be able to help you with your question.

The long and the short of it is..... just keep mining here and you will soon receive full benefits

And register for access to more miner/pool stats.

If I register, will I loose the hash associated to the BTC address? It seems, user name can't be a BTC address.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: mikefallen on December 09, 2015, 09:18:16 AM

Quote from: -ck on December 09, 2015, 09:09:36 AM

Dealing with a small database issue at the moment. The website will be offline again soon to restart it.

I can't seem to get 2FA working with AUTHY (https://www.authy.com/)

I keep getting invalid code when i'm trying to activate it. 2FA on every other site works....weird

Well it probably means they don't like anything but the default settings.
Currently the web site 2FA settings are Kano: totp SHA256 30s
and of course your secret key
You may be able to manually set them, but the QRCode on the web page says those settings with your secret key
(and works on both the apps I list)

I chose SHA256 ... coz we mine bitcoins using SHA256

The default used on the net seems to be the much simpler to crack SHA1

omega015

full member

Activity: 182

Merit: 100

Quote from: hawkfish007 on December 09, 2015, 10:53:23 AM

{"hashrate1m": "25.1T", "hashrate5m": "23.5T", "hashrate1hr": "20T", "hashrate1d": "1.95T", "hashrate7d": "290G", "lastupdate": 1449676071, "workers": 5, "shares": 41037433, "bestshare": 3737048.6019535731}

My 1 day hashrate seems low. Is it due to db issue? I haven't registered yet, just using my BTC address to mine. Been mining here since 2 hours prior to block 387268. How do I find out if I am close to 5N?

ooops forgot to hit post... anyway I wrote that it will take time for the 7day rate to get up to speed (1 day does seem low). Someone with more knowledge on the 5N should be able to help you with your question.

The long and the short of it is..... just keep mining here and you will soon receive full benefits

And register for access to more miner/pool stats.

omega015

full member

Activity: 182

Merit: 100

Quote from: kano on December 09, 2015, 10:55:13 AM

Oh oops, didn't answer all your questions.

Yeah the low shift is very short as you can see, 3m 21s and during the end of that shift I had to restart ckpool due to a problem I caused with ckdb
You were most likely failed over to your backup pool for a lot of that 3m 21s (as probably most everyone was for a minute or 2)
A shift has no special weighting, your shares are all the same value per share diff, so a short or long shift make no difference to the share value.

Also regarding rewards, you'll see they are all looking ok on the Rewards page, calculated correctly.

ooops didn't even notice the short round. I think only 1 of my miners has the modified cgminer and the others are stock from bitmains firmware so this might of contributed

bctmke

sr. member

Activity: 294

Merit: 250

Quote from: kano on December 09, 2015, 10:44:25 AM

Quote from: omega015 on December 09, 2015, 10:36:56 AM

Kano (when you get a moment),

Will the shifts during the db issue cause any problems with payment calcs / 5N etc...? I notice those shifts have no reward figures and for one of the shifts the hash rate of my miners dropped right off.

5ogcm mutsumi Dec-09 14:16:15 41m 1s 485.114k 595 846.77GHs 3.697k 131.22 0 0 0.00%
5og7t lucy Dec-09 13:33:15 43m 0s 507.152k 1.768k 844.19GHs 3.033k 167.21 0 0 0.00%
5og2t kosaki Dec-09 13:29:53 3m 21s 12.504k 5.210k 266.74GHs 12 1,042.00 0 0 0.00%

Thanks.

EDIT: or could the low hash rate be due to ckpool restart?

Ah right yep I see the problem.

That data isn't actually used anywhere in the database or in the calculations of rewards.
It's calculated purely for display there.
A ckdb restart will fix it by clearing all the PPS calculations and redoing them.
I guess in my code that calculates them, a block found while ckdb is reloading skipped the ones not calculated yet.
OK added to my todo list to fix the code, I can see where the problem is.

I'm not sure if everyone really wants another restart, but since they are only attribute numbers, not actual values used to determine anything, I might wait until tomorrow before doing yet another restart to fix them.

I'm ok with delaying the next DB restart

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: omega015 on December 09, 2015, 10:36:56 AM

Kano (when you get a moment),

Will the shifts during the db issue cause any problems with payment calcs / 5N etc...? I notice those shifts have no reward figures and for one of the shifts the hash rate of my miners dropped right off.

5ogcm mutsumi Dec-09 14:16:15 41m 1s 485.114k 595 846.77GHs 3.697k 131.22 0 0 0.00%
5og7t lucy Dec-09 13:33:15 43m 0s 507.152k 1.768k 844.19GHs 3.033k 167.21 0 0 0.00%
5og2t kosaki Dec-09 13:29:53 3m 21s 12.504k 5.210k 266.74GHs 12 1,042.00 0 0 0.00%

Thanks.

EDIT: or could the low hash rate be due to ckpool restart?

Oh oops, didn't answer all your questions.

Yeah the low shift is very short as you can see, 3m 21s and during the end of that shift I had to restart ckpool due to a problem I caused with ckdb
You were most likely failed over to your backup pool for a lot of that 3m 21s (as probably most everyone was for a minute or 2)
A shift has no special weighting, your shares are all the same value per share diff, so a short or long shift make no difference to the share value.

Also regarding rewards, you'll see they are all looking ok on the Rewards page, calculated correctly.

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1966. (Read 5352429 times)