KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1961.

epichaberdasher

member

Activity: 66

Merit: 10

Quote from: kano on December 10, 2015, 05:10:32 PM

Quote from: helipotte on December 10, 2015, 05:08:00 PM

CGminer Does not work with my cards. If I use cgminer, they hash very slow. Due to the firmware (1.4.5) these cards have. Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511

Yes I said that in my email cgminer doesn't work with the latest monarchs and why it doesn't.

In your pic you can see 10 bad shares a second.
If you had 10 of them, then that's 100 bad shares a second.
The pool gets a total of less than 1000 shares a second from EVERYONE

I know my Monarch is probably responsible for a lot out of those few if i reboot it. Which i try not to do anymore.

Are the invalid shares impacting the pool negatively ?

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

sorry about the bad info, i have relegated my bfl products to paper weight duty last year Grin

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: helipotte on December 10, 2015, 05:08:00 PM

CGminer Does not work with my cards. If I use cgminer, they hash very slow. Due to the firmware (1.4.5) these cards have. Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511

Yes I said that in my email cgminer doesn't work with the latest monarchs and why it doesn't.

In your pic you can see 10 bad shares a second.
If you had 10 of them, then that's 100 bad shares a second.
The pool gets a total of less than 1000 shares a second from EVERYONE

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

CGminer Does not work with my cards. If I use cgminer, they hash very slow. Due to the firmware (1.4.5) these cards have. Here is a response from -ck.

https://bitcointalksearch.org/topic/m.12934511

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: helipotte on December 10, 2015, 04:53:03 PM

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this mining software because of the Monarchs I have. I think this also results in a ton of invalids (95%+). This doesn't happen on Bitcoin.cz.

https://i.imgur.com/JqGSRht.jpg

Thanks!

Yeah as I said in my email, the problem is that the pool invalid stats are high because of your monarchs
One monarch isn't the end of the earth, but you have a lot of them and they are indeed sending out bad 1 diff shares at a rate higher than the good shares of even the top miners.

I've on my todo list to add stats about this on the workers page so anyone can see it for their workers and I can tell people to take note of it and fix it ASAP.

epichaberdasher

member

Activity: 66

Merit: 10

Quote from: helipotte on December 10, 2015, 04:57:21 PM

Quote from: epichaberdasher on December 10, 2015, 04:55:59 PM

Quote from: helipotte on December 10, 2015, 04:53:03 PM

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this because of the Monarchs I have. I think this also results in a ton of invalids. This doesn't happen on Bitcoin.cz.

Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.

Now the shares say (invalid jobID)

Try one Monarch at a time and see if it works, use a BFGMiner command line with just the basics.
Doesnt seem like a pool issue, id post in the BFGMiner thread or in Lightfoots monarch thread if you still have issues. BFGMiner + Monarch combo is extremely buggy unfortunately.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

the drivers are built in cgminer unless they have been removed

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: helipotte on December 10, 2015, 04:53:03 PM

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this mining software because of the Monarchs I have. I think this also results in a ton of invalids (95%+). This doesn't happen on Bitcoin.cz.

Thanks!

when i had bfl products i was able to use cgminer Wink

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Quote from: epichaberdasher on December 10, 2015, 04:55:59 PM

Quote from: helipotte on December 10, 2015, 04:53:03 PM

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this because of the Monarchs I have. I think this also results in a ton of invalids. This doesn't happen on Bitcoin.cz.

Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.

Now the shares say (invalid jobID)

mikefallen

member

Activity: 72

Merit: 10

oh my lord

epichaberdasher

member

Activity: 66

Merit: 10

Quote from: helipotte on December 10, 2015, 04:53:03 PM

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this because of the Monarchs I have. I think this also results in a ton of invalids. This doesn't happen on Bitcoin.cz.

Thanks!

Its normal for monarchs on BFGMiner. Mine does that too, could not figure out how to stop it. Kano said not to worry about it since it will adjust and start submitting shares at the correct difficulty. It should only do that for about 20-30 seconds. They do it when switching to new blocks as well.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

well i think that if diff continues this trend btc price will increase ant pool has hit 264 p and with that hash rate they are still waiting 30 minutes to a solve Huh

epichaberdasher

member

Activity: 66

Merit: 10

Can we tell which part of the world the extra hash came from ?

If blocks are being pumped out at this speed then its not just a spike.

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Hi.

Just switched one of my miners over to this pool. I am having an issue where I get a bunch of diff 1 shares rejected that say (Above target). I am using BFGminer

5.4.1. I have to use this mining software because of the Monarchs I have. I think this also results in a ton of invalids (95%+). This doesn't happen on Bitcoin.cz.

Thanks!

Nuttycoins

newbie

Activity: 49

Merit: 0

Quote from: pj40 on December 10, 2015, 04:48:19 PM

Quote from: sorry2xs on December 10, 2015, 04:45:57 PM

I didn't think that there was that kind of hashing sitting idle Huh

Haven't seen huge increases since 2014, and the diff was nowhere near what it is now. Kind of makes me regret buying that batch 8 s7.

Very good chance this is what that is... testing them all before shipping out.

pj40

full member

Activity: 180

Merit: 100

Quote from: sorry2xs on December 10, 2015, 04:45:57 PM

I didn't think that there was that kind of hashing sitting idle Huh

Haven't seen huge increases since 2014, and the diff was nowhere near what it is now. Kind of makes me regret buying that batch 8 s7.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

I didn't think that there was that kind of hashing sitting idle Huh

epichaberdasher

member

Activity: 66

Merit: 10

What the hell is going on, wheres all this extra hashpower coming from, its massive.

Nuttycoins

newbie

Activity: 49

Merit: 0

Quote from: pj40 on December 10, 2015, 04:37:47 PM

Quote from: sorry2xs on December 10, 2015, 04:32:06 PM

block number 387624 confirmed extremely fast or is that my imagination

Blocks are being pumped out very fast with a huge increase in network hashrate...so expect a very large jump in difficulty in 8 days.

Time Between Blocks 6.82 (minutes)

Difficulty 79,102,380,900.23
Hash Rate 829,694,344.09 GH/s

Unreal!

My prediction is they will back it off for awhile again, to try to keep it lower.... like they did before the last increase, and then hit it again right after.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

6.9 days with a 45% retarget increase Huh

edit: 825 PH/s

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1961. (Read 5352158 times)