KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 2103.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: TheOneJester on April 14, 2015, 09:59:00 PM

Had a rough day at work. Angry

I was finally able to upload the update to the Android Play store tonight. You guys should see it rolling out to your devices/play store in a few hours from now.

CKPool Stats

Future Plans:

Add "kano" to pool name
Solo CKPool (ck-'s pool?) capabilities.
Code optimizations.
Other user requests if any.

This app has really helped my addiction of checking http://kano.is every few minutes to see if a block has been found. Now my phone will tell me if a block is found Cheesy

Quote from: Mikestang on April 14, 2015, 04:47:59 PM

Nice, will the update feature api support that you mentioned? Definitely need to show the pool as Kano ckpool.
Looking forward to using this.

The app can now handle api access. You will need an API key to use the "Block Found" notification feature.

I plan on adding a toggle for Kano or ck- pool endpoints. (Unfortunately that means I'll need to stop mining on Kano so I can actually test the features.)
^{Damnit guys, ^{you are gonna make me need to be active on two different topics? ^{Perhaps it's time to start my own thread. ^{I like bumping kano's thread though}}}}

Awesome, will look my my Google Play store update notification.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mirahan on April 14, 2015, 10:22:15 PM

Another noob question, if you have the patience.

My worker shows .269% invalid. What does this mean? (worker = mirahan)

Anticipated thanks. Just trying to learn. It seems I am very slow to catch on to all this. Trying to read as much as I can, but ugh.

that means 99.731 % are good and .269% are rejects. so if you have 1000gh

997.31 gh are counted for earning power.

It is A very good number 0.000 % is best , but anything under 1% is pretty good

I checked on you you have 1.02th or 1020gh same number different way to say it.

So you are more likely to really have 1023gh and that 3gh is lost in transport no big deal.

At todays prices you are losing 20 cents a month about 2.40 usd a year. Perfectly normal to lose that much.

mirahan

newbie

Activity: 26

Merit: 0

Another noob question, if you have the patience.

My worker shows .269% invalid. What does this mean? (worker = mirahan)

Anticipated thanks. Just trying to learn. It seems I am very slow to catch on to all this. Trying to read as much as I can, but ugh.

TheOneJester

newbie

Activity: 26

Merit: 0

Had a rough day at work. Angry

I was finally able to upload the update to the Android Play store tonight. You guys should see it rolling out to your devices/play store in a few hours from now.

CKPool Stats

Future Plans:

Add "kano" to pool name
Solo CKPool (ck-'s pool?) capabilities.
Code optimizations.
Other user requests if any.

This app has really helped my addiction of checking http://kano.is every few minutes to see if a block has been found. Now my phone will tell me if a block is found Cheesy

Quote from: Mikestang on April 14, 2015, 04:47:59 PM

Nice, will the update feature api support that you mentioned? Definitely need to show the pool as Kano ckpool.
Looking forward to using this.

The app can now handle api access. You will need an API key to use the "Block Found" notification feature.

I plan on adding a toggle for Kano or ck- pool endpoints. (Unfortunately that means I'll need to stop mining on Kano so I can actually test the features.)
^{Damnit guys, ^{you are gonna make me need to be active on two different topics? ^{Perhaps it's time to start my own thread. ^{I like bumping kano's thread though}}}}

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: Digitalmocking on April 14, 2015, 01:02:17 PM

A system reboot fixed whatever was going on, both back to 1.15TH/s average.

oh bitmain.

My S3+ did the same thing, something in the Bitmain internals probably. I've even had the asics show -----o and shut it down for an hour and fired it back up to oooooo, so mysterious.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: kano on April 14, 2015, 04:43:18 PM

Quote from: TheOneJester on April 14, 2015, 11:58:20 AM

MMM it works... How did I find out?

I'm actually quite happy about this app now.
Setup and forget! It will warn you if your hash rate drops below a threshold, and it will notify you if a block has been found.

Future Plans:

I will try to get this to function for CK's solo pool.

Will be updating on Google Play in the next few hours... Cause that how long Google Play takes Cheesy

http://i.imgur.com/v0VTRbgl.jpg http://i.imgur.com/fzh43FMl.jpg

Maybe for an update you could add the word Kano to the pool name Tongue

Nice, will the update feature api support that you mentioned? Definitely need to show the pool as Kano ckpool.
Looking forward to using this.

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: TheOneJester on April 14, 2015, 11:58:20 AM

MMM it works... How did I find out?

I'm actually quite happy about this app now.
Setup and forget! It will warn you if your hash rate drops below a threshold, and it will notify you if a block has been found.

Future Plans:

I will try to get this to function for CK's solo pool.

Will be updating on Google Play in the next few hours... Cause that how long Google Play takes Cheesy

http://i.imgur.com/v0VTRbgl.jpg http://i.imgur.com/fzh43FMl.jpg

Maybe for an update you could add the word Kano to the pool name Tongue

BlInK311

full member

Activity: 154

Merit: 100

Quote from: Llord-of-the-Sword on April 14, 2015, 03:19:10 PM

Quote from: philipma1957 on April 14, 2015, 08:46:20 AM

Quote from: Llord-of-the-Sword on April 14, 2015, 05:00:40 AM

Quote from: philipma1957 on April 10, 2015, 07:31:58 AM

Now I am interested to see how the very large rental I did works in this case. I peaked at a 1ph for a 3 shift rental minutes 24 hours ago.

I spent about .5 btc Since it was only for 4 shifts does my average stay flat. If it is the case a huge short rental is more effective. Since you peak the average hash in under 500%.

say 150 shifts = 500%

If I average 400th over 4 shifts

4/150 x 400th = 10th average right away? and it stays at 10th basically all the way.

I am basing all calcs on a flat pool rate. I know if pool rate gets real high my hash average drops.

So far I am in between an average of 5-6th as I peaked at 1ph over 4 shifts but the 4 shift average was 381th.

I also realize that shift count for 500% varies.

% of the 500% is 90% + 15% so I have 395% left on my rental. I suspect I need 3 more blocks to break even.

first payment was 0.099 waiting on the second.

Where are you renting? Sounds interesting...

Nicehash.

I am renting a few hundred th right now.

Not really seeing how profit can be maximized with this rental service unless you get lucky and find a block on a solo site like solo.CK. Otherwise, it's just a money loop where the platform owner (Nicehash/Wethash) is the only one making a profit. The sellers make what they would at a decent pool and the buyers are just funneling coins trying to get lucky. If the BTC/TH/DAY price was set lower than a buyer could see a constant profit margin. Too risky for me.

Westhash had extreamly low BTC/TH/DAY price earlier today. I got 200th at 0.0025 btc/th/day for about 2 hours. I should have gotten a PH at that price. Now its back up to 0.0098.

Llord-of-the-Sword

newbie

Activity: 27

Merit: 0

Quote from: philipma1957 on April 14, 2015, 08:46:20 AM

Quote from: Llord-of-the-Sword on April 14, 2015, 05:00:40 AM

Quote from: philipma1957 on April 10, 2015, 07:31:58 AM

Now I am interested to see how the very large rental I did works in this case. I peaked at a 1ph for a 3 shift rental minutes 24 hours ago.

I spent about .5 btc Since it was only for 4 shifts does my average stay flat. If it is the case a huge short rental is more effective. Since you peak the average hash in under 500%.

say 150 shifts = 500%

If I average 400th over 4 shifts

4/150 x 400th = 10th average right away? and it stays at 10th basically all the way.

I am basing all calcs on a flat pool rate. I know if pool rate gets real high my hash average drops.

So far I am in between an average of 5-6th as I peaked at 1ph over 4 shifts but the 4 shift average was 381th.

I also realize that shift count for 500% varies.

% of the 500% is 90% + 15% so I have 395% left on my rental. I suspect I need 3 more blocks to break even.

first payment was 0.099 waiting on the second.

Where are you renting? Sounds interesting...

Nicehash.

I am renting a few hundred th right now.

Not really seeing how profit can be maximized with this rental service unless you get lucky and find a block on a solo site like solo.CK. Otherwise, it's just a money loop where the platform owner (Nicehash/Wethash) is the only one making a profit. The sellers make what they would at a decent pool and the buyers are just funneling coins trying to get lucky. If the BTC/TH/DAY price was set lower than a buyer could see a constant profit margin. Too risky for me.

Digitalmocking

full member

Activity: 224

Merit: 100

Quote from: Digitalmocking on April 14, 2015, 12:09:35 PM

Quote from: kano on April 14, 2015, 08:59:58 AM

Quote from: Digitalmocking on April 14, 2015, 04:43:22 AM

Several of my S5s are running around 20% below what they normally do when on kano.is, but they run full speed on westhash slush, is it just weird luck?

Do you mean when mining here directly or when mining through proxyhash?
proxyhash adds 2 things:
1) proxy latency so you'd expect lower performance (more rejects)
2) excessive extra work restarts so again you'd expect lower performance from that also

I mean mining here directly, I have 4 S5s that have been on the pool straight 32 hours now, two of them are doing what I expect, between 1.12 and 1.13, the other two are still under a th/sec and have been since they switched back over from westhash. None of them have moved any work units to westhash, so they aren't switching. Reject rates are under .11%, no HW errors, stales are under .05%

This is however the first time these have been configured to run anything at westhash, I may remove that pool and see what happens after a restart.

All 8 of my SP20E boxes are mining at the rates I expect based on the power I'm giving them.

Latency is just fine from all 4:

Code:

root@antMiner:~# ping stratum.kano.is
PING stratum.kano.is (104.194.28.194): 56 data bytes
64 bytes from 104.194.28.194: seq=0 ttl=58 time=36.334 ms
64 bytes from 104.194.28.194: seq=1 ttl=58 time=36.364 ms
64 bytes from 104.194.28.194: seq=2 ttl=58 time=36.002 ms
64 bytes from 104.194.28.194: seq=3 ttl=58 time=35.985 ms
64 bytes from 104.194.28.194: seq=4 ttl=58 time=36.004 ms
^C
--- stratum.kano.is ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 35.985/36.137/36.364 ms

Maybe they just need a reboot. Really weird.

A system reboot fixed whatever was going on, both back to 1.15TH/s average.

oh bitmain.

Digitalmocking

full member

Activity: 224

Merit: 100

Quote from: kano on April 14, 2015, 08:59:58 AM

Quote from: Digitalmocking on April 14, 2015, 04:43:22 AM

Several of my S5s are running around 20% below what they normally do when on kano.is, but they run full speed on westhash slush, is it just weird luck?

Do you mean when mining here directly or when mining through proxyhash?
proxyhash adds 2 things:
1) proxy latency so you'd expect lower performance (more rejects)
2) excessive extra work restarts so again you'd expect lower performance from that also

I mean mining here directly, I have 4 S5s that have been on the pool straight 32 hours now, two of them are doing what I expect, between 1.12 and 1.13, the other two are still under a th/sec and have been since they switched back over from westhash. None of them have moved any work units to westhash, so they aren't switching. Reject rates are under .11%, no HW errors, stales are under .05%

This is however the first time these have been configured to run anything at westhash, I may remove that pool and see what happens after a restart.

All 8 of my SP20E boxes are mining at the rates I expect based on the power I'm giving them.

Latency is just fine from all 4:

Code:

root@antMiner:~# ping stratum.kano.is
PING stratum.kano.is (104.194.28.194): 56 data bytes
64 bytes from 104.194.28.194: seq=0 ttl=58 time=36.334 ms
64 bytes from 104.194.28.194: seq=1 ttl=58 time=36.364 ms
64 bytes from 104.194.28.194: seq=2 ttl=58 time=36.002 ms
64 bytes from 104.194.28.194: seq=3 ttl=58 time=35.985 ms
64 bytes from 104.194.28.194: seq=4 ttl=58 time=36.004 ms
^C
--- stratum.kano.is ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 35.985/36.137/36.364 ms

Maybe they just need a reboot. Really weird.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: sorry2xs on April 14, 2015, 11:56:46 AM

Quote from: philipma1957 on April 14, 2015, 11:52:47 AM

Quote from: sorry2xs on April 14, 2015, 11:43:50 AM

You have your wish Philipma1957,352126

and I think it will use my older 1ph rental.

169%
218%
15%
93% of the 396% block

adds to 495% this will be close

I did catch it with my newer rental early today

whait a few minutes and check the rewards tab

I grabbed it sweet if the block was a few hours later I would get .0388 instead I get .1388

TheOneJester

newbie

Activity: 26

Merit: 0

MMM it works... How did I find out?

I'm actually quite happy about this app now.
Setup and forget! It will warn you if your hash rate drops below a threshold, and it will notify you if a block has been found.

Future Plans:

I will try to get this to function for CK's solo pool.

Will be updating on Google Play in the next few hours... Cause that how long Google Play takes Cheesy

http://i.imgur.com/v0VTRbgl.jpg http://i.imgur.com/fzh43FMl.jpg

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: philipma1957 on April 14, 2015, 11:52:47 AM

Quote from: sorry2xs on April 14, 2015, 11:43:50 AM

You have your wish Philipma1957,352126

and I think it will use my older 1ph rental.

169%
218%
15%
93% of the 396% block

adds to 495% this will be close

I did catch it with my newer rental early today

whait a few minutes and check the rewards tab

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: sorry2xs on April 14, 2015, 11:43:50 AM

You have your wish Philipma1957,352126

and I think it will use my older 1ph rental.

169%
218%
15%
93% of the 396% block

adds to 495% this will be close

I did catch it with my newer rental early today.

I have to wait and see.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

You have your wish Philipma1957,352126

TheOneJester

newbie

Activity: 26

Merit: 0

Quote from: kano on April 14, 2015, 09:20:16 AM

solo ckpool is -ck's solo mining pool.
https://bitcointalksearch.org/topic/yh-solockpoolorg-2-fee-solo-mining-usade-255-blocks-solved-763510

kano.is is ckpool with my ckdb backend and web for pool payouts and management.
My workers.php and address.php spit out the same ckpool text file as ckpool generates on solo
- since they are both virtually the same ckpool - but I wrote php scripts to see the ckpool user and worker file and do certain checks on the request

Thanks Kano!

If this is the case, I could probably modify the app to work for -ck's solo pool on the next iteration. I'm still waiting for a block to be found to verify that my latest changes work as intended

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

solo ckpool is -ck's solo mining pool.
https://bitcointalksearch.org/topic/yh-solockpoolorg-2-fee-solo-mining-usade-255-blocks-solved-763510

kano.is is ckpool with my ckdb backend and web for pool payouts and management.
My workers.php and address.php spit out the same ckpool text file as ckpool generates on solo
- since they are both virtually the same ckpool - but I wrote php scripts to see the ckpool user and worker file and do certain checks on the request

TheOneJester

newbie

Activity: 26

Merit: 0

Quote from: Mikestang on April 14, 2015, 03:09:26 AM

Quote from: TheOneJester on April 12, 2015, 11:17:53 PM

A new update to the android app is being tested... by me!

People with accounts will now be able to use their API key + their username on the app.

With the additional information, you can be notified when a new block is found.
I'll post here after doing some more tests Cheesy

Have you thought about providing the same app for the solo ckpool? Since there are no users, only btc addresses to mine to, it would work for everyone. I'd use it every day for the solo pool.

Sorry mikestang, you are going to see this twice haha

Quote from: TheOneJester

I'm still a bit new to the bitcoin mining community. Wink

When you say solo ckpool do you mean when you just name your worker the BTC address to have the pool send shares to?

If that is the case the app already handles that behavior, but if you mean something else please enlighten me!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

nicehash tends to run better then westhash if you point at kano's pool

My guess is server location for nicehash is less latency

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 2103. (Read 5352067 times)