Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 236. (Read 5352229 times)

member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
Block you frustrate me! Why you no crack!
My guess is... math. Grin

Just a quick notice from the Blocks page:

At the time of our last block--since the beginning of the year--we got 56 out of 57.11 expected blocks. That's ~98% of what could be statistically expected during that time period... Not bad from my perspective.
member
Activity: 238
Merit: 11
I'm ready for my 3 BTClock Sundae!

Cranking it up to OVER 9000!!!!!!
member
Activity: 266
Merit: 13
Block you frustrate me! Why you no crack!
copper member
Activity: 658
Merit: 101
Math doesn't care what you believe.
For some reason my pool 0 set on stratum+tcp://nya.kano.is:3333 fails and my miner goes to pool 1 stratum+tcp://stratum.kano.is:3333.

I tried rebooting and it doesn't help. Is there anything else I can try?

Probably totally unrelated, but I've been having weird Internet problems for the past couple of days.  Things like what the OP said above.  I'm having sites come and go from reachability.  Like right now I can get to www.speedtest.net, but not the test itself.  I can get to USPS.com, but not the PO Box management or login page.  Slushpools zcash pool has been more offline than online to me, from here at the Farm, but apparently is fine from my little PC in St. Louis throwing crumbs at it.

Last night my wife could receive messages on Telegram but not send them.  Our house has its own static IP, my office has another with the same carrier and Telegram worked fine for me.  This morning she was fine.

Its weird and more than a bit frustrating.

Just thought I'd mention it in case it IS somehow related (like a mid-west USA network wide routing issue).  Note that DNS lookups are working fine.
newbie
Activity: 43
Merit: 0
For some reason my pool 0 set on stratum+tcp://nya.kano.is:3333 fails and my miner goes to pool 1 stratum+tcp://stratum.kano.is:3333.

I tried rebooting and it doesn't help. Is there anything else I can try?
member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
On a semi-serious note, this must be a labour of love, because I can assure you my profit margins are small, but they are there. Folks may question why I do this, which I don't mind (I wonder myself, sometimes). I searched for the answer to that question and did not come up with "drug-addled" as the answer. Someone else said it, more eloquently that I can:

~
It's about the dream of it, not the statistics.
Epic quote.

Keep up the great work, K.P.!
jr. member
Activity: 34
Merit: 5
Mining for You at https://kano.is
Good evening from Kano.Is(land) and kanois.land!

There's been a LOT going on, although you can't tell from here. I've been a bit busy of late.
You know how this is run from a cubbyhole in the sub-basement of an abandoned building?
Well, this is an island. A lot of islands are the result of volcanic activity, this one included. Which could be a reason that the building was abandoned.
It has been unusually warm (in my opinion) in the cubbyhole. As it happens, there has been some volcanic activity of late. The draft through the cubbyhole just wasn't enough to keep the ants and mice cool. We tried fans, but the one cord just couldn't handle the load. We ended up scaling back and underclocking to keep things running.

I'm still working on improvements in the power supply, but with this location on the island being a bit warm, I have begun searching for new digs, as it were.  Grin



Speaking of digs, Billy Miner is still going at it in that wall in the rear of the cubbyhole. The heat has been rough, but he still keeps chipping away at those blocks. I heard a few of them bust the last week.

Igor spends most of his free time looking over Billy's shoulder. He sees something in there, but he's not saying what.  Since he comes from  very long line of Igors, the possibilities make me shudder, especially since his grandfather worked for that doctor near Darmstadt. I'm hoping for the best.



In contest and giveaway news, I'm saddened greatly by my lack of ability to do my only job - hash for you. Unfortunately the recent rise in temperature has caused a corresponding reduction in hashpower. It sux.  Embarrassed  Sad



There is good news, though! If you check my contact options in the left panel, I have a new email.
The website, https://kanois.land , has changed a little. I noticed that traffic has dropped the last few days, but there's different static content now. The pictures actually relate to some future content. Drop by, check it out, give me some feedback, please.  Smiley



Although I've been down, I've not been completely out - I have been keeping up with the thread. I am touched that a couple of you mentioned me. And, since one person actually asked for me, I guess it's time to do what I'm here to do, hash for you.
Congratulations to Tarby32!!! You've been awarded 500GH/s for five days, starting May 5th! Yeah, it's the 5/5 500-4-5!  Roll Eyes
Even I think that's a bit much on the name, but it keeps the theme.  Grin



On a semi-serious note, this must be a labour of love, because I can assure you my profit margins are small, but they are there. Folks may question why I do this, which I don't mind (I wonder myself, sometimes). I searched for the answer to that question and did not come up with "drug-addled" as the answer. Someone else said it, more eloquently that I can:

~
It's about the dream of it, not the statistics.



I'm going to check on the mice and Billy. Can't have them suffering heat strokes. Need to find Igor, too. Really odd that he's not over my shoulder. Hmmm.

Until next time,

MINE ON WITH KANO-SAN!!!

S3 firmware provided by Kano.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
For anyone wondering about miners beeping twice in the last few hours:

There was a failover for the majority of miners on the main stratum node at 17:23 (about 4.5hrs ago)
It was a disconnect reconnect, so all miners on stratum would have gone through their usual 5 minute failback shenanigans.  

There was again another failover on stratum, and this time also on NYA and UK (NL), at 21:46 (about 20 minutes ago)
This was again a very short disconnect reconnect, so most miners on stratum, NYA and UK (NL), would have gone through their usual 5 minute failback shenanigans.
Not all the nodes, handling the stratum node, disconnected this time, so not as many miners will have failed over, but the extra 2 nodes involved meant it was about the same.
copper member
Activity: 658
Merit: 101
Math doesn't care what you believe.
Guys has anyone used  https://www.eastshore.xyz to buy a miner?Is it safe?

Really?  An L3+ for $2199 that Bitmain sells for ~$750?

As Bitmain has REPEATEDLY stated:  They do not have authorized resellers.  If you buy from anyone but them you will not get warranty support.
jr. member
Activity: 238
Merit: 5
Would it be the case router also runs TV channels?

Yes, the router also does, cable TV. Is there an easy cure?

Have to check manual. Mine for example has 2 middle ports reserved for tv channels only. 1 and 4 for net. So you have to buy switcher and plug it to one of those if you want to run more then 2 miners.
newbie
Activity: 42
Merit: 0
Because if they declare in customs that its a pc case and its value its 90 usd i wont pay the 24% vat and 8% custom fees
full member
Activity: 658
Merit: 118
Guys has anyone used  https://www.eastshore.xyz to buy a miner?Is it safe?

I have bought from them, but there's always a mark up. Why bother when you can buy miners direct from Bitmain or companies like Blokforge?
newbie
Activity: 42
Merit: 0
Guys has anyone used  https://www.eastshore.xyz to buy a miner?Is it safe?
full member
Activity: 317
Merit: 110
Would it be the case router also runs TV channels?

Yes, the router also does, cable TV. Is there an easy cure?
legendary
Activity: 1568
Merit: 2037


The other question I got is kinda weird router oriented.
Seems like I can only logon to the miner and run the reconfiguration from the (4 port) router #4 port. The other ports won't let me logon Is that normal?
Took me a while to figure out that anomaly.



Would it be the case router also runs TV channels?

I can't say I know to much about routers Vlad may be on to something. I've never had an issue that way can you access your local wifi network and find the Miners there?
jr. member
Activity: 238
Merit: 5

I pointed them at the 'asic minertube' address.


When I go to my workers page it says one worker active. Though both seem to be doing their thing.


Welcome to the pool.

You don't want to point your S9's to the the minertube address.

Quoted from OP on page 1

"If you have an Asicminer Tube, you will need to mine to:
stratum+tcp://nonce.kano.is:27181
It won't work properly on any other mining port. Don't point normal miners here.
Your Tube miner stats will show up in your account without their worker name."

Here is a list of pool nodes you want to point to Depending on your physical location:

There are other nodes located around the world that you may be closer to:
stratum+tcp://nya.kano.is:3333 (NewYork)
stratum+tcp://uk.kano.is:3333 (London)
stratum+tcp://de.kano.is:3333 (Germany)
stratum+tcp://jp.kano.is:3333 (Japan)
stratum+tcp://sg.kano.is:3333 (Singapore)

You can find this info under miner configuration in the OP page 1.

As for your stats. Did you create an account with a username? You can seperate the miners by adding .1, .2 to the end of your workername.

Hope that helps



Yea that helps a bunch, thanks. I'll reconfigure the miners. I'm in Thailand so I put Singapore for pool#1 choice and Japan for pool#2.

The other question I got is kinda weird router oriented.
Seems like I can only logon to the miner and run the reconfiguration from the (4 port) router #4 port. The other ports won't let me logon Is that normal?
Took me a while to figure out that anomaly.



Would it be the case router also runs TV channels?
full member
Activity: 317
Merit: 110

I pointed them at the 'asic minertube' address.


When I go to my workers page it says one worker active. Though both seem to be doing their thing.


Welcome to the pool.

You don't want to point your S9's to the the minertube address.

Quoted from OP on page 1

"If you have an Asicminer Tube, you will need to mine to:
stratum+tcp://nonce.kano.is:27181
It won't work properly on any other mining port. Don't point normal miners here.
Your Tube miner stats will show up in your account without their worker name."

Here is a list of pool nodes you want to point to Depending on your physical location:

There are other nodes located around the world that you may be closer to:
stratum+tcp://nya.kano.is:3333 (NewYork)
stratum+tcp://uk.kano.is:3333 (London)
stratum+tcp://de.kano.is:3333 (Germany)
stratum+tcp://jp.kano.is:3333 (Japan)
stratum+tcp://sg.kano.is:3333 (Singapore)

You can find this info under miner configuration in the OP page 1.

As for your stats. Did you create an account with a username? You can seperate the miners by adding .1, .2 to the end of your workername.

Hope that helps



Yea that helps a bunch, thanks. I'll reconfigure the miners. I'm in Thailand so I put Singapore for pool#1 choice and Japan for pool#2.

The other question I got is kinda weird router oriented.
Seems like I can only logon to the miner and run the reconfiguration from the (4 port) router #4 port. The other ports won't let me logon Is that normal?
Took me a while to figure out that anomaly.

legendary
Activity: 1568
Merit: 2037

I pointed them at the 'asic minertube' address.


When I go to my workers page it says one worker active. Though both seem to be doing their thing.


Welcome to the pool.

You don't want to point your S9's to the the minertube address.

Quoted from OP on page 1

"If you have an Asicminer Tube, you will need to mine to:
stratum+tcp://nonce.kano.is:27181
It won't work properly on any other mining port. Don't point normal miners here.
Your Tube miner stats will show up in your account without their worker name."

Here is a list of pool nodes you want to point to Depending on your physical location:

There are other nodes located around the world that you may be closer to:
stratum+tcp://nya.kano.is:3333 (NewYork)
stratum+tcp://uk.kano.is:3333 (London)
stratum+tcp://de.kano.is:3333 (Germany)
stratum+tcp://jp.kano.is:3333 (Japan)
stratum+tcp://sg.kano.is:3333 (Singapore)

You can find this info under miner configuration in the OP page 1.

As for your stats. Did you create an account with a username? You can seperate the miners by adding .1, .2 to the end of your workername.

Hope that helps

full member
Activity: 317
Merit: 110
Howdy, I just signed on with my 2 antminer S9's.

Also my very first adventure into mining!

I pointed them at the 'asic minertube' address.

Is this correct?

When I go to my workers page it says one worker active. Though both seem to be doing their thing.

I'm not entirely sure how to read all the stats on the Kano page.
jr. member
Activity: 196
Merit: 4
ok, so sitting at .995 bitcoin sux.   I just need one more block reward to make it over 1.0, just barely.  .


NEED MORE BLOCKS!

Maybe when we fork to metric BTC you will have 2.2 Btc...ever think of that?
2.189 to be exact Cheesy

ROFL

Had to be EXACT!  too funny!
Jump to: