KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 382.

gaud

newbie

Activity: 84

Merit: 0

Quote from: BSGMiner on March 19, 2018, 10:28:39 AM

Quote from: kano on March 19, 2018, 01:01:18 AM

Oh in case anyone didn't notice ... there was a diff change 18 hours ago ... JUST after the last block

Code:

[2018-03-18 11:40:16.161+00] workinfo_add(): DIFF CHANGE: hi=514080 delta=5.23% new=3462542391191.6 prev=3290605988755.0

And of course the last block was 514075 at 2018‑03‑18 11:12:43 UTC

5.23% - well that's a lot better than the last couple

Does it make sense that some have bailed out due to profitability concerns (i.e. Electric cost & lower BTC-to-USD price)?

no point in spending money to keep the think on also if u turn it off it will save the life of the machine for when its more profitable again finialy if u can sell it for whaty u paid or better no loss

BSGMiner

member

Activity: 490

Merit: 16

1xA921 + 1xA741 + Backup-->1xA6 ;)

Quote from: kano on March 19, 2018, 01:01:18 AM

Oh in case anyone didn't notice ... there was a diff change 18 hours ago ... JUST after the last block

Code:

[2018-03-18 11:40:16.161+00] workinfo_add(): DIFF CHANGE: hi=514080 delta=5.23% new=3462542391191.6 prev=3290605988755.0

And of course the last block was 514075 at 2018‑03‑18 11:12:43 UTC

5.23% - well that's a lot better than the last couple

Does it make sense that some have bailed out due to profitability concerns (i.e. Electric cost & lower BTC-to-USD price)?

vortexz

legendary

Activity: 1120

Merit: 1001

Individually I have in no way had reasons or have to update the s9 miners and I am talking many are as far back

BSGMiner

member

Activity: 490

Merit: 16

1xA921 + 1xA741 + Backup-->1xA6 ;)

Quote from: nazzer on March 19, 2018, 08:35:13 AM

We haven't had a 50% block in a while ... let's crack this one down the middle

Agreed! Let's not wait until 100% just because it's "expected". Grin

nazzer

member

Activity: 238

Merit: 11

We haven't had a 50% block in a while ... let's crack this one down the middle

rifleman74

member

Activity: 658

Merit: 21

4 s9's 2 821's

Quote from: overcon on March 19, 2018, 08:05:41 AM

Site issues? Just getting timeouts or ? for speeds etcetera on the site.

Also:

Database timeout or reloading, mining is all OK

it happens every so often, mining is not affected. MINE ON WITH KANO-SAN!

overcon

sr. member

Activity: 393

Merit: 250

911 IT Admin. I keep 911 up so you get help ASAP!

Site issues? Just getting timeouts or ? for speeds etcetera on the site.

Also:

Database timeout or reloading, mining is all OK

Nick_01

newbie

Activity: 94

Merit: 0

Quote from: kano on March 19, 2018, 03:49:04 AM

Quote from: Nick_01 on March 19, 2018, 01:07:55 AM

Quote from: kano on March 19, 2018, 12:53:00 AM

Quote from: Nick_01 on March 18, 2018, 08:58:39 PM

Does it make sense to artificially increase the speed of the Antmeiner, how will it affect the chance of finding a block?

Well, not sure how you "artificially" increase the speed of a miner.

All that matters is the shares submitted - if there's more of them accepted at the same difficulty, or the same amount accepted but higher difficulty, then yep that's good.

If you mean to increase the hash rate above what it normally runs at, then you're most likely gonna shorten it's life dramatically.

my miner had a standard speed of 11 TH / s, I increased the core frequency to 618, and now he stably gives out 13.2-13.3 TH / s
http://prntscr.com/it4e75

Hmm - well the question is why it's standard speed was 11TH/s?

If it was running slower than it could run stably, then yep clocking it up faster should be fine.

But as I said, clocking it up faster can shorten the life of it, and if it's faster than it should run, then that will shorten it's life dramatically.
Hopefully that's not the case and it's OK

http://prntscr.com/it64io here its standard speed (screenshot) so I had to change it in the direction of increase Roll Eyes

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: Nick_01 on March 19, 2018, 01:07:55 AM

Quote from: kano on March 19, 2018, 12:53:00 AM

Quote from: Nick_01 on March 18, 2018, 08:58:39 PM

Does it make sense to artificially increase the speed of the Antmeiner, how will it affect the chance of finding a block?

Well, not sure how you "artificially" increase the speed of a miner.

All that matters is the shares submitted - if there's more of them accepted at the same difficulty, or the same amount accepted but higher difficulty, then yep that's good.

If you mean to increase the hash rate above what it normally runs at, then you're most likely gonna shorten it's life dramatically.

my miner had a standard speed of 11 TH / s, I increased the core frequency to 618, and now he stably gives out 13.2-13.3 TH / s
http://prntscr.com/it4e75

Hmm - well the question is why it's standard speed was 11TH/s?

If it was running slower than it could run stably, then yep clocking it up faster should be fine.

But as I said, clocking it up faster can shorten the life of it, and if it's faster than it should run, then that will shorten it's life dramatically.
Hopefully that's not the case and it's OK

Nick_01

newbie

Activity: 94

Merit: 0

Quote from: kano on March 19, 2018, 12:53:00 AM

Quote from: Nick_01 on March 18, 2018, 08:58:39 PM

Does it make sense to artificially increase the speed of the Antmeiner, how will it affect the chance of finding a block?

Well, not sure how you "artificially" increase the speed of a miner.

All that matters is the shares submitted - if there's more of them accepted at the same difficulty, or the same amount accepted but higher difficulty, then yep that's good.

If you mean to increase the hash rate above what it normally runs at, then you're most likely gonna shorten it's life dramatically.

my miner had a standard speed of 11 TH / s, I increased the core frequency to 618, and now he stably gives out 13.2-13.3 TH / s
http://prntscr.com/it4e75

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Oh in case anyone didn't notice ... there was a diff change 18 hours ago ... JUST after the last block

Code:

[2018-03-18 11:40:16.161+00] workinfo_add(): DIFF CHANGE: hi=514080 delta=5.23% new=3462542391191.6 prev=3290605988755.0

And of course the last block was 514075 at 2018‑03‑18 11:12:43 UTC

5.23% - well that's a lot better than the last couple

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: Nick_01 on March 18, 2018, 08:58:39 PM

Does it make sense to artificially increase the speed of the Antmeiner, how will it affect the chance of finding a block?

Well, not sure how you "artificially" increase the speed of a miner.

All that matters is the shares submitted - if there's more of them accepted at the same difficulty, or the same amount accepted but higher difficulty, then yep that's good.

If you mean to increase the hash rate above what it normally runs at, then you're most likely gonna shorten it's life dramatically.

Ze777

jr. member

Activity: 77

Merit: 4

Guys,any ideas/thoughts/performance stats about the Pangolin Whatsminer M3X ? Thinking about getting a couple ,do any of you recommend this ?

MINE ON!

Waztim

member

Activity: 210

Merit: 15

Kano Pool, the BEST Bitcoin Mining Pool on Earth!! Mine On With Kano-San!! Great Job on the graphic!! Mine On!!

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: Shazam!!! on March 18, 2018, 09:13:24 PM

Thanks for the feed back! As I had stated, I added the link (clickable) to my posts. I just wanted to be clear, that I let people know where to go. I've added it to the gif, and corrected the fee. I didn't add to the original, for the sake of keeping it as close to the original Mario as possible.

Also, I'd like to point out, the Chinese translates to: big reward small fee great support helpful community. Mostly added for the nostalgic look, but it still conveys a relevant message. It's not intended for our Chinese audience, so thats as far as I went. I do have, and I am working on Similar visually stimulating promo's for other Languages and cultures. Surprisingly, they have already gotten shared, and are receiving some attention.

https://i.imgur.com/NSKccYV.gif

Nice

merit-ed

Pecker

newbie

Activity: 74

Merit: 0

CLIPPED

https://i.imgur.com/NSKccYV.gif
[/quote]

Great Job on the Graphics! Thanks from all of us!

Mine on Kano!!

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

The pool is at 82+PH! Cheesy

Shazam!!!

full member

Activity: 350

Merit: 158

#takeminingback

Thanks for the feed back! As I had stated, I added the link (clickable) to my posts. I just wanted to be clear, that I let people know where to go. I've added it to the gif, and corrected the fee. I didn't add to the original, for the sake of keeping it as close to the original Mario as possible.

Also, I'd like to point out, the Chinese translates to: big reward small fee great support helpful community. Mostly added for the nostalgic look, but it still conveys a relevant message. It's not intended for our Chinese audience, so thats as far as I went. I do have, and I am working on Similar visually stimulating promo's for other Languages and cultures. Surprisingly, they have already gotten shared, and are receiving some attention.

Nick_01

newbie

Activity: 94

Merit: 0

Does it make sense to artificially increase the speed of the Antmeiner, how will it affect the chance of finding a block?

BSGMiner

member

Activity: 490

Merit: 16

1xA921 + 1xA741 + Backup-->1xA6 ;)

Quote from: AerialGopher on March 18, 2018, 08:24:17 PM

Quote from: Shazam!!! on March 18, 2018, 04:46:36 PM

I just want to share this here, for some of you to see. One of my Favs!!! It gets ALOT of attention out on the interwebs!!!

Feel free to Share it!!!

Code:

https://i.imgur.com/TSZjPhO.gif

[snip]

Cool.

Needs a URL where to go to.

Also, you might want to clarify that it's 0.9% not just 0.9.

Keep up the great work!

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 382. (Read 5352633 times)