Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 504. (Read 5352527 times)

jr. member
Activity: 196
Merit: 4
Reminds me of constipation...  when this block is finally out, it will be SUUUUUUCCCCCHHHHHH  a relief..

member
Activity: 123
Merit: 21
When will Feb be added with projections on the *block* page?
There's no projections on the Block page.
It just shows found blocks - so yep - when we find a block Smiley
But wait.. in the monthly statistics for Feb (which isn't there) it shows expected, etc?

That's what I was referencing.  Would the Blocks be 0, expected be x, blah, blah
The month of February won't show up until we find a block
jr. member
Activity: 168
Merit: 2
FYI, blokforge had 4 821's available in their feb batch (the expensive ones)
And march units available.



Bitmain still has T9+ in stock as well. $2008 USD

I Have no BCH, however. I would gladly get rid of these A6's and S7's for some T9's
member
Activity: 140
Merit: 18
When will Feb be added with projections on the *block* page?
There's no projections on the Block page.
It just shows found blocks - so yep - when we find a block Smiley
But wait.. in the monthly statistics for Feb (which isn't there) it shows expected, etc?

That's what I was referencing.  Would the Blocks be 0, expected be x, blah, blah
member
Activity: 658
Merit: 21
4 s9's 2 821's
When will Feb be added with projections on the *block* page?
There's no projections on the Block page.
It just shows found blocks - so yep - when we find a block Smiley

So let's find one in the next hour or two! We need a good weekend. Long blocks are painful, but a fact of mining.

Unfortunately with the increase in global hash rate, they hurt even more now. 
sr. member
Activity: 519
Merit: 253
When will Feb be added with projections on the *block* page?
There's no projections on the Block page.
It just shows found blocks - so yep - when we find a block Smiley

So let's find one in the next hour or two! We need a good weekend. Long blocks are painful, but a fact of mining.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
When will Feb be added with projections on the *block* page?
There's no projections on the Block page.
It just shows found blocks - so yep - when we find a block Smiley
member
Activity: 140
Merit: 18
When will Feb be added with projections on the *block* page?
member
Activity: 140
Merit: 18
FYI, blokforge had 4 821's available in their feb batch (the expensive ones)
And march units available.

jr. member
Activity: 196
Merit: 4
Thanks Smiley I have a camera set up but leaving the country so not all that keen on not having them a short distance away. Never know when a fan will fail, mouse will gnaw a cable, or something else Wink

Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?

All depends on the hashrate of the pool. It the hashrate was lower on your ramp up than it is on the ramp down, you will ramp down quicker. But yes, you will need to ramp back up. I have no problems leaving mine running with remote access so maybe look into how you can do that and leave your rigs up and hashing.

6 Mouse traps around miner and PSU,  If fan fails, which is unlikely, S9 will just stop hashing,  or you can get a buddy to check in on it,  Awesome miner I believe lets you set up notifications for 1 device for free?  Then call your buddy and say, hey can you unplug it if anything goes wrong.

FYI Mice will probably stay out of the area the S9 is in, its way too loud.  I know what I feel like when I enter the garage with 5 in there, its worse than the two in my office.  I just want to leave as well.! :-0)
legendary
Activity: 952
Merit: 1003
Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?

This is another reason I chose to have my miners hosted at a data center that specializes in bitcoin miners.  Not only is it cheaper to host than it was trying to run them at my house, I also have no noise or cooling issues.  When I go on long trips, I know my miners are well cared for! Cheesy

Of course, when I first started considering a hosting service rack space was a lot easier to find.
I gotta agree, Sonny...and this board was the place where i learned about the best place (for me).

Sad right now that everyone is at capacity.  I'd replace my three S7s up there with 821s...if I could afford them. Sheesh.
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?

This is another reason I chose to have my miners hosted at a data center that specializes in bitcoin miners.  Not only is it cheaper to host than it was trying to run them at my house, I also have no noise or cooling issues.  When I go on long trips, I know my miners are well cared for! Cheesy

Of course, when I first started considering a hosting service rack space was a lot easier to find.
jr. member
Activity: 104
Merit: 5
A short update on recent product activity:

The T9+'s purchased/paid for 2 days ago are now shipping.    I was surprised a bit by the faster-than-expected turnaround time considering the source.

The T9's are still in stock if you can tolerate a unit with better reliability albeit a lower hashrate per kw than the S9 (although I bought more of those as well - but they won't ship until March).
newbie
Activity: 4
Merit: 0
Yes, we get rewarded for each block found.  You'd get (Block reward + txn fees)*0.991 * 0.012%, that's approximately your proportion of the pools hashrate though it's really based on shares but it's close enough since kanosan wrote it!



Thanks!
member
Activity: 658
Merit: 21
4 s9's 2 821's
Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?


Same as the ramp up, but the ramp up is less time than when you originally started..  This assumes that the pool hash rate stays the same.
newbie
Activity: 57
Merit: 0
Thanks Smiley I have a camera set up but leaving the country so not all that keen on not having them a short distance away. Never know when a fan will fail, mouse will gnaw a cable, or something else Wink

Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?

All depends on the hashrate of the pool. It the hashrate was lower on your ramp up than it is on the ramp down, you will ramp down quicker. But yes, you will need to ramp back up. I have no problems leaving mine running with remote access so maybe look into how you can do that and leave your rigs up and hashing.
jr. member
Activity: 136
Merit: 2
Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?

All depends on the hashrate of the pool. It the hashrate was lower on your ramp up than it is on the ramp down, you will ramp down quicker. But yes, you will need to ramp back up. I have no problems leaving mine running with remote access so maybe look into how you can do that and leave your rigs up and hashing.
newbie
Activity: 57
Merit: 0
Phew, ok thanks guys Smiley In other news, I will need to shut down miners for a week starting Saturday night Sad Going away on holidays and can't really leave them running without keeping an eye on them. As I understand it, my ramp will at least keep for a few days? Is it the same time to ramp down? So if I rejoin when I get back in a week I will need to contribute for another 5-7 days to ramp back up to full?
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
15 days of ramping and still only 8.71 of 13.5THs. Why??

That's the entire line...if you've been here for 15 days, you're ramped up.

The pool hash rate for the last day is roughly 50.66PHs which means the 5Nd 'ramp' is roughly 12days 18hrs.

You're way past that now

Yep!  All we need to do is hit this block and you're all set. Smiley
member
Activity: 658
Merit: 21
4 s9's 2 821's
15 days of ramping and still only 8.71 of 13.5THs. Why??

That's the entire line...if you've been here for 15 days, you're ramped up.

The pool hash rate for the last day is roughly 50.66PHs which means the 5Nd 'ramp' is roughly 12days 18hrs.

You're way past that now
Jump to: