Author

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 114. (Read 279744 times)

newbie
Activity: 5
Merit: 0
12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ



Everyone scrypt miners not only lost 2.25 hours, but also lost some profit by increasing fee
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
the line is lower because of the delay in processing.   It's called an offset.  take your diagonal line, offset it down to the end of the flat spot... look, its going up MUCH steeper in more than one place, especially at the end.




On a lighter note I wanted to give congratulations:
The round of small TX payments were sent a little bit ago.  I checked the txID and holy crap has zpool grown:
https://live.blockcypher.com/btc/tx/02e3f0d73adda1b45fba244d4eb343b76fdaeaac09a2a8d422802e4daf369c26/
10.9BTC transacted

0.1BTC in network fees paid by the pool.

Keep up the good work =)   I know there have been problems, but I will be patient as I have always been... there are always setbacks in life, what matters is if/how they are handled.
member
Activity: 112
Merit: 10
Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF



those steeper ripples are proof of it catching up;  notice how linear the rest of the graph is at the beginning, none of those ripples...........  Its just delayed earnings posting as all as the DB catches up.


I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?


Please...... scroll up....................... Post #3030........................................................

Jared those are NOT STEEPER RIPPLES, they match similiar ripples earlier in the day, if they were steeper, the end of the graph wouldn't be 1/4" lower than the avg line I drew in photoshop because it would have stair stepped up enough to catch up with the avg line I drew....  The outage was large enough and the hashing was powerful enough (S9 Antminer) to clearly show zpool DID NOT compensate my wallet properly...
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF



those steeper ripples are proof of it catching up;  notice how linear the rest of the graph is at the beginning, none of those ripples...........  Its just delayed earnings posting as all as the DB catches up.


I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?


Please...... scroll up....................... Post #3030........................................................
newbie
Activity: 4
Merit: 0

I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?


Hi.
How to fix?

https://s2.postimg.org/48vtaaa6h/555.jpg

https://s2.postimg.org/xzixvqpxl/333.jpg

I want to receive payments in GBX (gobyte)

Thank you.

I'm having a similar issue.  Moved over from Nicehash when it went down and have been trying to get my machines back up and running ever since. 
Installed Awesome Miner and pointed it to Zpool, fired it up and all looked great until I saw that the site reported that I was earning BCH not BTC. 
Not sure where the currency is specified, but I want to be paid in BTC not BCH.

Can anyone help?

see:  http://zpool.ca/?address=1HrMPhbKT2droKxfjocc65SPvrCyy1yQcs


field pass c=BTC
member
Activity: 112
Merit: 10
Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF

legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ



I did, but it was "caught up," afterwards.  There ended up being no gap, it just slowly worked through the coins mined from 2+ hours, and is now down to 20 minutes behind (which is normal for me).  I am still seeing the same gap as you, but all the work done got kinda mashed into it all after the gap.

This is why the wallet page came up with a text warning about the frontend being offline for upgrades.
Now that everything is back up;  I know my miners never got disconnected the entire time; and are not showing on the right pane as connected, but the hashrate is clearly seen on the left....   reboot the miner or miner app andit will be as normal.  this is a common yiimp bug.

notice profitability caught up and found blocks can be explored on the pool status page....


If the pool is accepting work from you, that work is being recorded.   

When payouts are processed, the frontend automatically shuts down to allocate resources to make sure the payments are processed properly and efficiently.



Hope it helps guys.
newbie
Activity: 43
Merit: 0
12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ



I did, but it was "caught up," afterwards.  There ended up being no gap, it just slowly worked through the coins mined from 2+ hours, and is now down to 20 minutes behind (which is normal for me).  I am still seeing the same gap as you in the graph, but there was no missed time in the "last 50 Earnings" tab, all the work done got kinda mashed into the graph after the gap.
member
Activity: 112
Merit: 10
12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ

legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
What did I wrong?
Set up L3+
user: 16pymM2oKg6cFgkmqkAFCYFPtpzHCJ9j15
pass: c=BTC,d=128000

Why payout was made to BCH (same address, but not mine) not to BTC?
Understand, that not possible to return, but how can I start receiving to my address?

put a support ticket, if it happens quick enough, he can swap payout currency to BTC.

also, try generating a new RX address, and see if it has a problem with BCH again...

All you have to do is connect your miner and get one-2 shares, then view the wallet page, it will say it at the top on the payout totals table, it will say BTC or BCH.

Ive asked him about this scenario before, and found out that its the pool code having a mind of its own sometimes.  completely unexplainable as to why it will sometimes default/change to BCH.

i changed my address to http://zpool.ca/?address=1PcwSpQCSEpTizFKLYB5yf53o9mVDPMP83
but it again recognize as BCH
I didn't find place to open ticket.
Will try to find someone in chat https://discordapp.com/channels/376790817811202050/382162123192795136

the link was at the very bottom of the mainpage:  https://discord.gg/n45n6Jj

Hi.
How to fix?





I want to receive payments in GBX (gobyte)

Thank you.

I'm having a similar issue.  Moved over from Nicehash when it went down and have been trying to get my machines back up and running ever since. 
Installed Awesome Miner and pointed it to Zpool, fired it up and all looked great until I saw that the site reported that I was earning BCH not BTC. 
Not sure where the currency is specified, but I want to be paid in BTC not BCH.

Can anyone help?

see:  http://zpool.ca/?address=1HrMPhbKT2droKxfjocc65SPvrCyy1yQcs


field pass c=BTC

Can you post a screenshot of where in the miner software I need to add the command line ?


coin selection is via the password.  c=BTC  means you request payout of BTC.

pohval:  if you didn't initially use a c= when mining;  make a second attempt;  with a newly generated address, using the correct password flags.  I.E. c=BTC,scrypt as an example.   Your password should contain at least 2 variables:  "c=" and the algo type(s) you are mining; separated by a comma with no spaces.  When you connect, wait for ~10-20 accepted shares, and check the wallet page for what it says your earned coin type is.  This way minimal hash is wasted in the retry.

If this second try fails, go to the zpool.ca mainpage, scroll to the bottom, and get support letting them know you need the correct coin type assigned to your payout address. (most likely it will end up having to be a newly generated address if the others can't be changed due to exchange processes that already happened.  Can't reverse it once the exchange process happens [to my knowledge].)

full member
Activity: 209
Merit: 100
Join Cashbery Coin!
newbie
Activity: 43
Merit: 0
Sunday payouts have not been made yet?

thnks

Seems no, probably related to the down time, and playing catch up.
newbie
Activity: 10
Merit: 0
Sunday payouts have not been made yet?

thnks

Depending on where you live, they can occur as late as monday morning.
full member
Activity: 442
Merit: 137
Kamikaze9x9
hero member
Activity: 714
Merit: 512
front end is back, back end still disconnecting, but only every 15 mins or so now instead of 3 mins apart.
No blocks found on front end for hours so even though my rigs was mining while front end down, nothing was happening, yay!

Just go to another pool, this one is too messy, use it only for testing purposes at your own risk.

ZPOOL was kicking butt for me before the NH refugee overload.

I'm testing out other pools... but so far I am missing ZPOOL.

If the pool can get setup to handle all this new traffic smoothly I think I will probably be back.
newbie
Activity: 2
Merit: 0
Hi.
How to fix?

https://s2.postimg.org/48vtaaa6h/555.jpg

https://s2.postimg.org/xzixvqpxl/333.jpg

I want to receive payments in GBX (gobyte)

Thank you.

I'm having a similar issue.  Moved over from Nicehash when it went down and have been trying to get my machines back up and running ever since. 
Installed Awesome Miner and pointed it to Zpool, fired it up and all looked great until I saw that the site reported that I was earning BCH not BTC. 
Not sure where the currency is specified, but I want to be paid in BTC not BCH.

Can anyone help?

see:  http://zpool.ca/?address=1HrMPhbKT2droKxfjocc65SPvrCyy1yQcs
newbie
Activity: 2
Merit: 0
What did I wrong?
Set up L3+
user: 16pymM2oKg6cFgkmqkAFCYFPtpzHCJ9j15
pass: c=BTC,d=128000

Why payout was made to BCH (same address, but not mine) not to BTC?
Understand, that not possible to return, but how can I start receiving to my address?

put a support ticket, if it happens quick enough, he can swap payout currency to BTC.

also, try generating a new RX address, and see if it has a problem with BCH again...

All you have to do is connect your miner and get one-2 shares, then view the wallet page, it will say it at the top on the payout totals table, it will say BTC or BCH.

Ive asked him about this scenario before, and found out that its the pool code having a mind of its own sometimes.  completely unexplainable as to why it will sometimes default/change to BCH.

i changed my address to http://zpool.ca/?address=1PcwSpQCSEpTizFKLYB5yf53o9mVDPMP83
but it again recognize as BCH
I didn't find place to open ticket.
Will try to find someone in chat https://discordapp.com/channels/376790817811202050/382162123192795136
full member
Activity: 209
Merit: 100
Join Cashbery Coin!
seems like the front end is catching up with the back end, all kinds of old blocks showing up...
newbie
Activity: 43
Merit: 0
front end is back, back end still disconnecting, but only every 15 mins or so now instead of 3 mins apart.
No blocks found on front end for hours so even though my rigs was mining while front end down, nothing was happening, yay!

Same, I had 2 hours of unrecorded work.
legendary
Activity: 2716
Merit: 1116
front end is back, back end still disconnecting, but only every 15 mins or so now instead of 3 mins apart.
No blocks found on front end for hours so even though my rigs was mining while front end down, nothing was happening, yay!

Just go to another pool, this one is too messy, use it only for testing purposes at your own risk.
Jump to: