▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 110.

Tattysnuc

newbie

Activity: 2

Merit: 0

Quote from: ssmokeyy on December 12, 2017, 12:04:58 AM

Where is the password field ? Is that on zpool or awesome miner? Sorry I'm a newb only been doing this for 2 weeks. There is a lot to learn and I'm trying to learn as fast as I can.

I had the same issue then one kind user told me:

Options > Online Services > Zpool (algorithm used) > Edit > Command Line Parameters (Optional)

c=BTC

djmuk2

newbie

Activity: 36

Merit: 0

I did the same thing - mined to my NH wallet so now the funds are sitting in the NH wallet but I can't get to them...

Quote from: darkdude on December 11, 2017, 09:38:49 PM

want to clear something up. I am an idiot. zpool made the payment to my supplied btc address, but get this folks... the btc address i supplied was my nicehash wallet.. sigh... I forgot to change to my private wallet. So now I have the zpool payment showing up in my btc nice hash wallet

zpool did everything right it was entire my fault.

Nice I need to get in contact with nice hash (which obviously has bigger issues to deal with than my little problem) to see if they can transfer the btc out into my private wallet. I can see the funds sitting there

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: Sityl on December 12, 2017, 03:09:12 AM

Quote from: Jaysen472 on December 12, 2017, 02:50:04 AM

Yup, I'm n00b!

I have two rigs, can I point them both to zpool under the same BTC address without screwing myself somehow?

Thanks!

Yes

if you want to diffirentiate them, use an extra flag in the password so you see it on the wallet page:

instead of "c=BTC,scrypt"
you would put something like "GPURIG1,c=BTC,scrypt"

Don't use special characters or spaces in the rig names. a '-' is ok... but try to stick to letters and numbers only.

Sityl

newbie

Activity: 43

Merit: 0

Quote from: Jaysen472 on December 12, 2017, 02:50:04 AM

Yup, I'm n00b!

I have two rigs, can I point them both to zpool under the same BTC address without screwing myself somehow?

Thanks!

Yes

Jaysen472

newbie

Activity: 5

Merit: 0

Yup, I'm n00b!

I have two rigs, can I point them both to zpool under the same BTC address without screwing myself somehow?

Thanks!

isaj

newbie

Activity: 14

Merit: 0

Quote from: stangerm2 on December 11, 2017, 06:03:34 PM

Quote from: Sityl on December 11, 2017, 05:54:16 PM

I disabled Nist5 and Skein, and my graph has gone from flat to increasing again. Those two algorithms are definitely borked.

How do you do that?

If you use NemosMiner, open your .bat file, and just delete them.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: ssmokeyy on December 12, 2017, 12:04:58 AM

Where is the password field ? Is that on zpool or awesome miner? Sorry I'm a newb only been doing this for 2 weeks. There is a lot to learn and I'm trying to learn as fast as I can.

awesome miner already sets the password.. this is a bug and should be reported..

ssmokeyy

member

Activity: 88

Merit: 11

Where is the password field ? Is that on zpool or awesome miner? Sorry I'm a newb only been doing this for 2 weeks. There is a lot to learn and I'm trying to learn as fast as I can.

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: ssmokeyy on December 11, 2017, 11:49:33 PM

Hey guys I have been using awesome miner and using the zpool for the pool. btc payout. I setup it up yesterday and checked on it today. When I got to zpool I pulled up my wallet info to see how my payout is going and I find this? we are short of this currency. please change from bch to btc. stop your miners. we do not have any more bch blocks. The hole time I thought I was getting paid out in btc. The wallet address I put in the miner is my btc address. double checked it today. Is there somewhere I need to go to make this change?
I have a hardware wallet for bitcoin.

cut and paste from zpool.ca mainpage. I highlighted the part that pertains:

Quote from: zpool.ca

You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c= is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins.
c= doesn't always work. However, if you fail to correct this and/or continue mining with the wrong currency detected you will NOT be able to change to the proper currency once an actual balance has been posted to the address. The quickest and easiest way for you to fix this, is create a new address, update your miners and make sure again you've set c= properly. Do not log a support ticket asking to convert your balance from one currency to another, they'll be closed. If you insist on keeping and using the original address. Your accrued balance will be cleared and the proper currency updated for you. Any blocks still new/immature/exchange will automaticlly convert to the new currency
See the "Pool Status" area on the right for PORT numbers.

If this fails and you wish to use the same address, open a ticket as per the instructions. The support link is at the bottom of the mainpage.

ssmokeyy

member

Activity: 88

Merit: 11

Hey guys I have been using awesome miner and using the zpool for the pool. btc payout. I setup it up yesterday and checked on it today. When I got to zpool I pulled up my wallet info to see how my payout is going and I find this? we are short of this currency. please change from bch to btc. stop your miners. we do not have any more bch blocks. The hole time I thought I was getting paid out in btc. The wallet address I put in the miner is my btc address. double checked it today. Is there somewhere I need to go to make this change?
I have a hardware wallet for bitcoin.

MaxiMan

newbie

Activity: 85

Merit: 0

Is this normal in a whole day of mining?= too much intervals...
Mining with Nvidia 980ti and EBWF
https://i.imgur.com/f4cdpGA.png

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: darkdude on December 11, 2017, 09:38:49 PM

want to clear something up. I am an idiot. zpool made the payment to my supplied btc address, but get this folks... the btc address i supplied was my nicehash wallet.. sigh... I forgot to change to my private wallet. So now I have the zpool payment showing up in my btc nice hash wallet

zpool did everything right it was entire my fault.

Nice I need to get in contact with nice hash (which obviously has bigger issues to deal with than my little problem) to see if they can transfer the btc out into my private wallet. I can see the funds sitting there

yeah, sadly, there's nothing on the poolside that can be done to swap it out....

Lets say that you are trying to change a payout address for someone else? you'd need to sign a message from the payout address to prove you control it..... that's big hurdle #1 since you dont own the private keys.

then #2, you do have the chance to try and recover said funds.... but... given how they are handling refunds/debts.... how do you think they will handle these ones? this is the worst thing in my eyes...

But, you can try contacting them. They should still have control of the wallet, so its a matter if they are honest or not.

darkdude

jr. member

Activity: 113

Merit: 1

want to clear something up. I am an idiot. zpool made the payment to my supplied btc address, but get this folks... the btc address i supplied was my nicehash wallet.. sigh... I forgot to change to my private wallet. So now I have the zpool payment showing up in my btc nice hash wallet

zpool did everything right it was entire my fault.

Nice I need to get in contact with nice hash (which obviously has bigger issues to deal with than my little problem) to see if they can transfer the btc out into my private wallet. I can see the funds sitting there

sundownz

hero member

Activity: 714

Merit: 512

Hope to see ZPOOL fully restored / bug-free again soon. I miss it mining on other pools for only 2 days, haha.

garandhero

newbie

Activity: 22

Merit: 0

Nevermind figured it out.

bobthejanitor

newbie

Activity: 2

Merit: 0

Quote from: Grimacester on December 11, 2017, 07:33:55 PM

@bobthejanitor, what are you mining? if its nist5 we've been talking about its issues, disable it for now. If its something else you may just need to give it some time, or look at the chart and mentally create a rough average.

rgr thought it was me doing something wrong... I guess I should read the forum... Thanks for your time.

BoB

Grimacester

newbie

Activity: 4

Merit: 0

@bobthejanitor, what are you mining? if its nist5 we've been talking about its issues, disable it for now. If its something else you may just need to give it some time, or look at the chart and mentally create a rough average.

bobthejanitor

newbie

Activity: 2

Merit: 0

I am new to Zpool and I am mining at 1.3GH but the website says I am only mining at 8MH. This is after 1hr of mining with no stopping. I thought it was the uptick in users so I went somewhere else for a few days. Just came back and it is the same.

Anyone know why?

Thanks,
BoB

Grimacester

newbie

Activity: 4

Merit: 0

looks like something is up with veltor. profit fell to 0, but its still finding blocks and coin. ... its still listed on yobit, taking a beating in price... yobit seems to be having issues... never used it so not entirely sure.

Sityl

newbie

Activity: 43

Merit: 0

Quote from: stangerm2 on December 11, 2017, 06:03:34 PM

Quote from: Sityl on December 11, 2017, 05:54:16 PM

I disabled Nist5 and Skein, and my graph has gone from flat to increasing again. Those two algorithms are definitely borked.

How do you do that?

I use Zpool through awesomeminer, so I disabled it under Option>Algorithms.

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 110. (Read 279812 times)