Author

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 125. (Read 279601 times)

newbie
Activity: 20
Merit: 0
Fix your goddamn servers already, should take you a couple of hours set up a load balancer, goddamn amateurs running pools.
full member
Activity: 270
Merit: 115
no confirmation of coins
no valid balances
stratum server crashes every hour few times 10-30% of MH going nowhere
no information about all of this
i think they had time to get more servers, to resolve all of this troubles, but they didn't do that...

nicehash №2 ?

Really !!!    Undecided

The owner of the site does not have a crystal ball, the owner of the site did not know Nicehash was going to be hit, the owner of the site was not expecting the substantual influx of miners due to the problem(s) Nicehash is having right now.

Be paitent, I am sure all is well here. The service has been hit hard over the last 36 - 48 hours with new miners (rigs) and will be back up as soon as possible.


newbie
Activity: 42
Merit: 0
no confirmation of coins
no valid balances
stratum server crashes every hour few times 10-30% of MH going nowhere
no information about all of this
i think they had time to get more servers, to resolve all of this troubles, but they didn't do that...

nicehash №2 ?
newbie
Activity: 42
Merit: 0
due to an incredible amount of mining power, the database can't catch up to the blocks that are mined to display them.  You are credited for them, it'll just take a bit to display.  I really wish people would read the previous 3 pages before they ask whats going on as its all been explained.
is it your hopes? or u know something more then us?
newbie
Activity: 36
Merit: 0
Is the tank in last 24h profitability (on scrypt) due to the influx of hashpower killing the coins or just that the database hasn't caught up with the mined coins?  it has dropped from over 3 to around 2

If the former perhaps we should limit the amount of hash put on one coin - perhaps spread over the top 3/4 profitable or try and stay < a certain %age of network hash?

David
full member
Activity: 235
Merit: 100
due to an incredible amount of mining power, the database can't catch up to the blocks that are mined to display them.  You are credited for them, it'll just take a bit to display.  I really wish people would read the previous 3 pages before they ask whats going on as its all been explained.
newbie
Activity: 48
Merit: 0
Ok so last withdrawal shows dots instead of a confirmation.  82 minutes ago. Litecoin. Never made it to external wallet. What's up with that?
newbie
Activity: 42
Merit: 0
it was twice last 5 min
http://prntscr.com/hk4e2r

winmtr
  mine.zpool.ca -    1 | 5293 | 5291 |    0 |  116 |  200 |  116 |
and there were no connection troubles to pool
newbie
Activity: 42
Merit: 0

I see one problem with your connection already:
neoscrypt.mine.zpool.ca:4233 is the correct address......... you omitted "neoscrypt."  Also check the reply just above this one.  He was having issues with his miner app version.  I dont know if it applies to you or not.

Be sure password contains "c=,neoscrypt" plus any other flags/options you have set, as well as any other algos in your autoswitch script if doing autoswitching =)
my scrypt taking name from http://www.zpool.ca/api/status if i understood right,
maybe there is a problem with api ?
this error happening after some time of good work ...
_______________________________________
but i upgraded to new version and didn't saw this problem more

no , i was wrong it happens again, crackfoo can u check please, if api doesn't have any errors?
legendary
Activity: 3486
Merit: 1126
I can't connect my A4 dominator to Zpool, any help?
Added to POOL#1: stratum+tcp://scrypt.mine.zpool.ca:3433#xnsub or scrypt.mine.zpool.ca:3433#xnsub (same result, can't connect, device start then stop)
POOL 1# LOGIN: My btc address
POOL 1# PASSWORD: c=btc,d=128000 (got work for L3+, but A4 didnt)

What can I do? Thanks you guys

try without #xnsub
newbie
Activity: 24
Merit: 0
I can't connect my A4 dominator to Zpool, any help?
Added to POOL#1: stratum+tcp://scrypt.mine.zpool.ca:3433#xnsub or scrypt.mine.zpool.ca:3433#xnsub (same result, can't connect, device start then stop)
POOL 1# LOGIN: My btc address
POOL 1# PASSWORD: c=btc,d=128000 (got work for L3+, but A4 didnt)

What can I do? Thanks you guys
legendary
Activity: 3486
Merit: 1126
Hi,

I'm a refugee from Nicehash and I switched to Zpool earlier today. Now I'm having some strange problems.

My hashrate is reported accurately and the last 50 earnings keeps updating as well but for the last 2 hours my total unpaid earnings haven't moved an inch. Am I missing something obvious being a zpool noob or is something wrong?

Thanks!

Yeah I said something earlier.. i suspect it's probably the webprocess needing kicked so it sync's with reality.  

Yes, with the influx of miners, creates a huge influx mined blocks to be processed. That process is lagging behind but rest assured the blocks get credited and applied to your accounts.

I’ll be looking at ways to speed up this process but the culprits are usually poorly coded wallets that take their time responding to RPC queries to check blocks.

If there are coins which are habitually poor responders I’ll be dropping them.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?

I see one problem with your connection already:
neoscrypt.mine.zpool.ca:4233 is the correct address......... you omitted "neoscrypt."  Also check the reply just above this one.  He was having issues with his miner app version.  I dont know if it applies to you or not.

Be sure password contains "c=,neoscrypt" plus any other flags/options you have set, as well as any other algos in your autoswitch script if doing autoswitching =)
my scrypt taking name from http://www.zpool.ca/api/status if i understood right,
maybe there is a problem with api ?
this error happening after some time of good work ...

Well, I am unsure why its not connecting, but, I do not know your miner or settings....

as mentioned above, the address to connect to that algo is as I mentioned above.  This is one problem you must remedy that I can tell so far....
newbie
Activity: 42
Merit: 0

I see one problem with your connection already:
neoscrypt.mine.zpool.ca:4233 is the correct address......... you omitted "neoscrypt."  Also check the reply just above this one.  He was having issues with his miner app version.  I dont know if it applies to you or not.

Be sure password contains "c=,neoscrypt" plus any other flags/options you have set, as well as any other algos in your autoswitch script if doing autoswitching =)
my scrypt taking name from http://www.zpool.ca/api/status if i understood right,
maybe there is a problem with api ?
this error happening after some time of good work ...
_______________________________________
but i upgraded to new version and didn't saw this problem more
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
fill good when you put blame on other do you ,, its not big problem for me but the thing is killing the trust in crypto, if you mine on some pool you trust that pool gonna pay you
I'm sorry, but its happened to me on a personal wallet, and on this site.  This is not an uncommon problem.
It sounds like you are blaming the pool for what happened to the blockchain......
Hi,

I'm a refugee from Nicehash and I switched to Zpool earlier today. Now I'm having some strange problems.

My hashrate is reported accurately and the last 50 earnings keeps updating as well but for the last 2 hours my total unpaid earnings haven't moved an inch. Am I missing something obvious being a zpool noob or is something wrong?

Thanks!

Yeah I said something earlier.. i suspect it's probably the webprocess needing kicked so it sync's with reality.  

Yeah, see my note above.

This huge influx of miners has changed the dynamics a little and the pool servers must be playing catch up.


Check your wallet page to see if balance and total earned have increased since last view... its probably just the graphs behind.

neoscrypt stratum is falling every hour? or its just for me?

http://prntscr.com/hk2mm9

anyone have same troubles guys?

I see one problem with your connection already:
neoscrypt.mine.zpool.ca:4233 is the correct address......... you omitted "neoscrypt."  Also check the reply just above this one.  He was having issues with his miner app version.  I dont know if it applies to you or not.

Be sure password contains "c=,neoscrypt" plus any other flags/options you have set, as well as any other algos in your autoswitch script if doing autoswitching =)
hero member
Activity: 677
Merit: 500
Hmm, my 3x1080Ti rig was mining neoscrypt just fine. Then for the past 4 hours it hasn't found a single block.  I restarted nemosminer and it seems to be fine now.

Looking at the display "log", there was no change in difficulty.  It just kept mining away like there wasn't a problem.  The only reason why it seemed suspicious was the pool says my rig was offline for 4 hours.

Not sure what happened there, but kind of upset I missed out on 4 hours of neoscrypt mining.  It's not often it auto-switches to that algo.

You need to upgrade KlausT to newest version. Older ones will do that. I had about 30 machines do that earlier.

https://github.com/KlausT/ccminer/releases

The new one fixes it =)

Thanks!  I disabled the Klaust miner for now. Will look into the upgrade though.

I wonder if it will get upgraded if I delete the miner and re-run nemosminer.  It's suppose to download the excecutables, but I'm not sure if it downloads the latest.

EDIT: Never mind.  I found out the path to the download is coded to download a specific path/zip file.  I edited the path to point to the new version, and it looks like it's working for now.  Going to check up after 30 minutes.

Thanks for pointing me in the right direction.
newbie
Activity: 11
Merit: 0
fill good when you put blame on other do you ,, its not big problem for me but the thing is killing the trust in crypto, if you mine on some pool you trust that pool gonna pay you
newbie
Activity: 48
Merit: 0
Hi,

I'm a refugee from Nicehash and I switched to Zpool earlier today. Now I'm having some strange problems.

My hashrate is reported accurately and the last 50 earnings keeps updating as well but for the last 2 hours my total unpaid earnings haven't moved an inch. Am I missing something obvious being a zpool noob or is something wrong?

Thanks!

Yeah I said something earlier.. i suspect it's probably the webprocess needing kicked so it sync's with reality. 
Jump to: