▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 127.

guytechie

hero member

Activity: 677

Merit: 500

Hmm, my 3x1080Ti rig was mining neoscrypt just fine. Then for the past 4 hours it hasn't found a single block. I restarted nemosminer and it seems to be fine now.

Looking at the display "log", there was no change in difficulty. It just kept mining away like there wasn't a problem. The only reason why it seemed suspicious was the pool says my rig was offline for 4 hours.

Not sure what happened there, but kind of upset I missed out on 4 hours of neoscrypt mining. It's not often it auto-switches to that algo.

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: crackfoo on December 06, 2017, 10:31:35 AM

Quote from: djmuk2 on December 06, 2017, 10:27:40 AM

assume the 1.5TH/s that has arrived on scrypt are refugees from nicehash....

yes, we're taking in a lot of refugees. Still working on stabilizing x11

did some tweaking of MySQL and appears, so far, to be quite a considerable improvement on all algo's. I hope I didn't just jinx it.

geekyguy937

newbie

Activity: 11

Merit: 0

Quote from: crackfoo on December 06, 2017, 11:34:15 AM

Quote from: geekyguy937 on December 06, 2017, 11:26:32 AM

Hey folks, Im wondering if there is anything special that i need to do to get gridseed Orb Asics to work with zpool, I've been playing with them for a few days, I can connect to zpool, and I'm hashing, but no accepted shares. If I move to a different pool like Slush, I get accepts with no problem while mining sha256 and Scrypt.

Any ideas? Can someone share their cgminer bat file so I can compare?
Thanks in advance...

I suspect it might be a problem with the diff. Have you tried manually setting that?

That said... I couldn't get my GAW Fury's working on the pool either. Think it's just too slow for the diff's.

I was thinking something along the same lines, however the diff on the slushpool is up around 1.5T, while zpool is lower, unless there is something else I dont see in the background. How would I manually set the diff?

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: geekyguy937 on December 06, 2017, 11:26:32 AM

Hey folks, Im wondering if there is anything special that i need to do to get gridseed Orb Asics to work with zpool, I've been playing with them for a few days, I can connect to zpool, and I'm hashing, but no accepted shares. If I move to a different pool like Slush, I get accepts with no problem while mining sha256 and Scrypt.

Any ideas? Can someone share their cgminer bat file so I can compare?
Thanks in advance...

I suspect it might be a problem with the diff. Have you tried manually setting that?

That said... I couldn't get my GAW Fury's working on the pool either. Think it's just too slow for the diff's.

geekyguy937

newbie

Activity: 11

Merit: 0

Hey folks, Im wondering if there is anything special that i need to do to get gridseed Orb Asics to work with zpool, I've been playing with them for a few days, I can connect to zpool, and I'm hashing, but no accepted shares. If I move to a different pool like Slush, I get accepts with no problem while mining sha256 and Scrypt.

Any ideas? Can someone share their cgminer bat file so I can compare?
Thanks in advance...

amitim

newbie

Activity: 59

Merit: 0

Hi!
My cards:

1x1080

Code:

Type: NVIDIA

Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerTpruvotcuda9 Phi 26,11 MH/s 0,00059 7,419 0,02263 zpool-
ccminerAlexis78 Sib 15,92 MH/s 0,00048 6,055 0,03030 zpool-
CcminerTpruvot NeoScrypt 1,12 MH/s 0,00047 5,956 0,42361 zpool-

2x1070

Code:

1BTC = 12555.92234809 USD

Type: NVIDIA

Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerKlaust NeoScrypt 2,48 MH/s 0,00105 13,173 0,42361 zpool-
CcminerTpruvotcuda9 Phi 40,88 MH/s 0,00093 11,617 0,02263 zpool-
ccminerAlexis78 Sib 25,70 MH/s 0,00078 9,778 0,03030 zpool-

Really? Or this is wrong benchmark?

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: djmuk2 on December 06, 2017, 10:27:40 AM

assume the 1.5TH/s that has arrived on scrypt are refugees from nicehash....

yes, we're taking in a lot of refugees. Still working on stabilizing x11

djmuk2

newbie

Activity: 36

Merit: 0

assume the 1.5TH/s that has arrived on scrypt are refugees from nicehash....

BitcoinGeekBoy

member

Activity: 104

Merit: 10

Quote from: crackfoo on December 06, 2017, 09:40:25 AM

Quote from: BitcoinGeekBoy on December 06, 2017, 09:37:07 AM

http://zpool.ca/?address=1AT1PzoNGecJUDZc68x7w89TJwVbDeYwhU

My X11 hash rate on the pool is showing 50-75% of what is should be for the last few hours?

My local D3 console shows 17GHs. I rebooted but still the same.

Is there any issue with the X11 pool?

I'm working on trimming down the x11 coins to accommodate the influx if users. Should have it stabilized soon.

Ok no problem. Thanks for the quick reply.

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: BitcoinGeekBoy on December 06, 2017, 09:37:07 AM

http://zpool.ca/?address=1AT1PzoNGecJUDZc68x7w89TJwVbDeYwhU

My X11 hash rate on the pool is showing 50-75% of what is should be for the last few hours?

My local D3 console shows 17GHs. I rebooted but still the same.

Is there any issue with the X11 pool?

I'm working on trimming down the x11 coins to accommodate the influx if users. Should have it stabilized soon.

STSMiner

full member

Activity: 270

Merit: 115

Quote from: BenScoobert on December 06, 2017, 09:32:47 AM

Ever have one of those days where you feel really stupid?

I've been using nicehash for a while but they are currently "down for maintenance" for 5 hours.

So I thought right I'll set up on zpool as this is too much.
However I can't for the life of me point my dual mining rigs at zpool using simpleminer OS, can anyone provide the correct parameters?
my nicehash one went like this

claymore v10.0
-epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal BTCADDRESS -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal BTCADDRESS

To make this easier go here >> http://www.awesomeminer.com/

Install this software, you will thank me for it.

BitcoinGeekBoy

member

Activity: 104

Merit: 10

http://zpool.ca/?address=1AT1PzoNGecJUDZc68x7w89TJwVbDeYwhU

My X11 hash rate on the pool is showing 50-75% of what is should be for the last few hours?

My local D3 console shows 17GHs. I rebooted but still the same.

Is there any issue with the X11 pool?

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: BenScoobert on December 06, 2017, 09:32:47 AM

Ever have one of those days where you feel really stupid?

I've been using nicehash for a while but they are currently "down for maintenance" for 5 hours.

So I thought right I'll set up on zpool as this is too much.
However I can't for the life of me point my dual mining rigs at zpool using simpleminer OS, can anyone provide the correct parameters?
my nicehash one went like this

claymore v10.0
-epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal BTCADDRESS -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal BTCADDRESS

We don't have an ethash pool but we do have decred.

So for dpool it'd be:

-dpool stratum+tcp://decred.mine.zpool.ca:5744 -dwal BTCADDRESS

BenScoobert

member

Activity: 70

Merit: 10

Ever have one of those days where you feel really stupid?

I've been using nicehash for a while but they are currently "down for maintenance" for 5 hours.

So I thought right I'll set up on zpool as this is too much.
However I can't for the life of me point my dual mining rigs at zpool using simpleminer OS, can anyone provide the correct parameters?
my nicehash one went like this

claymore v10.0
-epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal BTCADDRESS -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal BTCADDRESS

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: STSMiner on December 06, 2017, 08:39:04 AM

crackfoo,

BitSend (xevan) wallet - unknown new rules on your wallet !

yeah, it just a warning. something segwit related.

STSMiner

full member

Activity: 270

Merit: 115

crackfoo,

BitSend (xevan) wallet - unknown new rules on your wallet !

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: Straya1 on December 06, 2017, 03:00:43 AM

only this one -- 24h ago 0.39273221 888 a5cc819a1e3f05eb0ca539d33d1ee264d149645c73d665b038b323a6317ec259

all other one never come to cryptopia

looks like our wallet is on a fork. Will have to re-sync

djmuk2

newbie

Activity: 36

Merit: 0

Question...
I was mining with my nicehash wallet as the BTC address so all the profits went into one wallet, assuming worst case and nicehash is hacked/dead how can I change the payout address to my personal wallet??

Or am I stuffed?

David
EDIT - I have now changed my miners address to a personal wallet...!

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: Straya1 on December 06, 2017, 06:01:05 AM

lol man my first time mining this coin to on zpool and problems damn.. never have problem with other coin for now not sure way this get stuffed

well verifying the tx's on the blockchain in question is the first step in seeing what the deal is with the tx....

blockchain.info has a blockchain explorer for BTC... maybe there is a similar site for your coin....

else you will have to download and sync a wallet and do it all manually.... This is a big problem with depositing funds to an exchange, they have the info; check with the exchange about the TXid's you had sent there if you cant figure out how to look up the tx yourself online or in the wallet..... they may be able to help.

Straya1

newbie

Activity: 11

Merit: 0

lol man my first time mining this coin to on zpool and problems damn.. never have problem with other coin for now not sure way this get stuffed

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 127. (Read 279744 times)