▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 43.

Lercker

sr. member

Activity: 358

Merit: 250

Quote from: Mardn on February 24, 2018, 07:07:27 PM

Thank you for the answer Lercker.
I know the pool is short of coins... anyway short is strange since they write to have more than 43k LUX and a LUX masternode is 16K... anyway the other pools pay at 0.05, here the limit written is 1,00. (20 times more). I have reached it and still does not pay. I just think the pool should pay at the limit written even if they are short, since they are allowing the mining by weeks. Otherwise who is mining this coin is doing the work for who?
Can I have an official answer by a Zpool member about how long my lux will be "held hostage"?

First off the pool was/is short 43k, it does not have 43k. He will not answer questions when the answer is clearly written on the home page: "If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s)." "BTC is the only guaranteed payout currency."

mike467

newbie

Activity: 6

Merit: 0

Same happened to me also, mining Innova on Zpool and 0 balance for about 2-3 Hours.

Also my 0.4 Inn that i had unconfirmed, dissapeared.

Anyway to fix this?

Thank you!

Lex342

newbie

Activity: 6

Merit: 0

Hello. Today I was mining INN. Around 1 pm (UTC) pool stopped responding, and after a few minutes, updating the page, I saw that my balances had disappeared. (about 42 INN).
http://ibb.co/ezAiLx

dramf

newbie

Activity: 4

Merit: 0

Quote from: MagicSmoker on February 25, 2018, 08:23:49 AM

Quote from: dramf on February 25, 2018, 08:21:39 AM

hi to all!

is it normal that this happens?
http://i68.tinypic.com/2jbh2b.jpg

Are you freaking blind? This was explained just a few posts above!!!

sorry...

I believed the problem was only on those coins and on cryptopia not all including verge using algorithm x17

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: dramf on February 25, 2018, 08:21:39 AM

hi to all!

is it normal that this happens?

Are you freaking blind? This was explained just a few posts above!!!

dramf

newbie

Activity: 4

Merit: 0

hi to all!

is it normal that this happens?
http://i68.tinypic.com/2jbh2b.jpg

crackfoo

legendary

Activity: 3570

Merit: 1126

Cryptopia has been disabled, too many issues right now with them and more and more deposits not showing up. This means LUX(phi), BTX(bitcore), XRE(x11evo), BERN(x14) & blakecoin are all 0 value right now. Please switch to mining something else in the meantime.
All coins found only on cryptopia will show a 0.00000 value until the issues have been resolved.

JDS2003

newbie

Activity: 9

Merit: 0

Hi all.
Can someone explain me, why neoscrypt profit is so low? For 1080ti it's around 0.0025 BTC. For direct GBX it's around 0.005 BTC. Twice lower on zpool neoscrypt. Can i somehow mine only GBX or Vivo on zpool?
Hope you help me. Thanks.

No.15

newbie

Activity: 56

Merit: 0

OK Thank you. I was just curious and not worried because it went back up.

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: No.15 on February 24, 2018, 07:51:17 PM

Can someone explain what happened here?

graphs weren't processed while I was doing some work is all.

No.15

newbie

Activity: 56

Merit: 0

Can someone explain what happened here?

http://www.govbt.com/pics/2018-02-24_194933.jpg

Mardn

newbie

Activity: 8

Merit: 0

Quote from: Lercker on February 24, 2018, 04:20:36 PM

Quote from: Mardn on February 24, 2018, 04:12:02 PM

I have reached the minimum quantity for payout in LUX by one day (1 lux) but the pool is not paying. Does anyone knows why?

Pool is currently short lux. I suggest switching payout coins or switching pools if you really want lux.

Thank you for the answer Lercker.
I know the pool is short of coins... anyway short is strange since they write to have more than 43k LUX and a LUX masternode is 16K... anyway the other pools pay at 0.05, here the limit written is 1,00. (20 times more). I have reached it and still does not pay. I just think the pool should pay at the limit written even if they are short, since they are allowing the mining by weeks. Otherwise who is mining this coin is doing the work for who?
Can I have an official answer by a Zpool member about how long my lux will be "held hostage"?

Lercker

sr. member

Activity: 358

Merit: 250

Quote from: Mardn on February 24, 2018, 04:12:02 PM

I have reached the minimum quantity for payout in LUX by one day (1 lux) but the pool is not paying. Does anyone knows why?

Pool is currently short lux. I suggest switching payout coins or switching pools if you really want lux.

Mardn

newbie

Activity: 8

Merit: 0

I have reached the minimum quantity for payout in LUX by one day (1 lux) but the pool is not paying. Does anyone knows why?

TiT Monkey

newbie

Activity: 52

Merit: 0

I'm using an Ant L3, running specs listed on zpool

Bitmain L3+ Settings:
URL: scrypt.mine.zpool.ca:3433#xnsub
Worker:
Password: c=,d=128000

i have seen some people posting that in password field they put c=,scrypt instead of the c=,d=128000, any difference in doing this?

Lercker

sr. member

Activity: 358

Merit: 250

Quote from: ?? on ??

I'm dual mining with clay more on zpool.

All the configuration looks right.

If I don't set the password field it will auto select random blake2s coin and then pay it out to my BTC address.

I've set the password field to mine only XVG.

Question is, will it still auto convert/exchange to BTC or should I now use an XVG address?

You don't choose the coin you mine; only the algorithm and coin you are paid in. If you use c=XVG you need an Verge address, if you use c=BTC you need a BTC address.

Mepr

newbie

Activity: 2

Merit: 0

Pleas how is API request for Total Earned reply?

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: Havane on February 24, 2018, 03:04:09 AM

What's the good way to mine only XVG on zpool with claymore miner ?
My dpool.txt file is :

POOL: blake2s.mine.zpool.ca:5766, WALLET: xxxxxxx, PSW: c=XVG-blake2s

and with that my earnings are

   Name Amount Percent mBTC Time Status
   Shield (blake2s) 0.026238 XSH 0.021% 0.00011888 63m ago Immature (75/260)
   Verge (blake2s) 0.568877 XVG 0.036% 0.00318677 74m ago Immature (120/140)
   Taj (blake2s) 0.046712 TAJ 0.047% 0.00011276 75m ago Immature (12/34)
   Taj (blake2s) 0.070933 TAJ 0.072% 0.00017123 80m ago Immature (14/34)
   Taj (blake2s) 0.079610 TAJ 0.080% 0.00019218 83m ago Immature (15/34)
   Taj (blake2s) 0.060503 TAJ 0.061% 0.00014605 84m ago Immature (16/34)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 98m ago Immature (48/26)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 99m ago Immature (52/26)
   Shield (blake2s) 0.080702 XSH 0.065% 0.00036563 100m ago Immature (93/260)
   Shield (blake2s) 0.082798 XSH 0.066% 0.00037513 101m ago Immature (94/260)
   Shield (blake2s) 0.090683 XSH 0.073% 0.00041085 101m ago Immature (95/260)

what's wrong ?

Well, for one thing it specifically says on the home page to NOT add the algo to the coin symbol in the password field; the algo is specified in the URL/port combination. So your password should read: c=XVG

Otherwise, you, just like manic_miner74 before you, don't seem to understand that this pool let's you specify the algo to mine, and the coin to receive as payment, but does not let you directly mine a single coin. So all of the Shield and Taj and Neva coins listed above will be sent to an exchange to get converted into the payout coin you specified, XVG (once you fix your password, anyway).

GPUaddict

newbie

Activity: 27

Merit: 0

Quote from: Havane on February 24, 2018, 03:04:09 AM

What's the good way to mine only XVG on zpool with claymore miner ?
My dpool.txt file is :

POOL: blake2s.mine.zpool.ca:5766, WALLET: xxxxxxx, PSW: c=XVG-blake2s

and with that my earnings are

   Name Amount Percent mBTC Time Status
   Shield (blake2s) 0.026238 XSH 0.021% 0.00011888 63m ago Immature (75/260)
   Verge (blake2s) 0.568877 XVG 0.036% 0.00318677 74m ago Immature (120/140)
   Taj (blake2s) 0.046712 TAJ 0.047% 0.00011276 75m ago Immature (12/34)
   Taj (blake2s) 0.070933 TAJ 0.072% 0.00017123 80m ago Immature (14/34)
   Taj (blake2s) 0.079610 TAJ 0.080% 0.00019218 83m ago Immature (15/34)
   Taj (blake2s) 0.060503 TAJ 0.061% 0.00014605 84m ago Immature (16/34)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 98m ago Immature (48/26)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 99m ago Immature (52/26)
   Shield (blake2s) 0.080702 XSH 0.065% 0.00036563 100m ago Immature (93/260)
   Shield (blake2s) 0.082798 XSH 0.066% 0.00037513 101m ago Immature (94/260)
   Shield (blake2s) 0.090683 XSH 0.073% 0.00041085 101m ago Immature (95/260)

what's wrong ?

Hi Havane! Have you tried AwesomeMiner?

It would still use claymore and allow you a per coin per algo configuration.

Havane

jr. member

Activity: 76

Merit: 3

What's the good way to mine only XVG on zpool with claymore miner ?
My dpool.txt file is :

POOL: blake2s.mine.zpool.ca:5766, WALLET: xxxxxxx, PSW: c=XVG-blake2s

and with that my earnings are

   Name Amount Percent mBTC Time Status
   Shield (blake2s) 0.026238 XSH 0.021% 0.00011888 63m ago Immature (75/260)
   Verge (blake2s) 0.568877 XVG 0.036% 0.00318677 74m ago Immature (120/140)
   Taj (blake2s) 0.046712 TAJ 0.047% 0.00011276 75m ago Immature (12/34)
   Taj (blake2s) 0.070933 TAJ 0.072% 0.00017123 80m ago Immature (14/34)
   Taj (blake2s) 0.079610 TAJ 0.080% 0.00019218 83m ago Immature (15/34)
   Taj (blake2s) 0.060503 TAJ 0.061% 0.00014605 84m ago Immature (16/34)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 98m ago Immature (48/26)
   Neva (blake2s) 0.003323 NEVA 0.066% 0.00004958 99m ago Immature (52/26)
   Shield (blake2s) 0.080702 XSH 0.065% 0.00036563 100m ago Immature (93/260)
   Shield (blake2s) 0.082798 XSH 0.066% 0.00037513 101m ago Immature (94/260)
   Shield (blake2s) 0.090683 XSH 0.073% 0.00041085 101m ago Immature (95/260)

what's wrong ?

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 43. (Read 279744 times)