▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 69.

malthrax

newbie

Activity: 182

Merit: 0

Is there something wrong or delayed with XVG payout?

My last payout (2.50614980) from about an hour ago does not show a txid, and has not shown up in my wallet. All previous payouts went through without issue.

http://zpool.ca/?address=DQfgakpxeJyR89kuzEZ1DVfsFPSQMFD2Nc

This appears to have resolved. Thanks if you fixed it.

The whole site is lagging - either due to load, or another DDOS or something. I'm sure it'll sort itself out eventually, but right now its kind of painful.

bttalkdim2

newbie

Activity: 30

Merit: 0

Zpool not pay in ETH

mezerwi

newbie

Activity: 16

Merit: 0

No reply for my L3+

Server URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Worker name: 0x611F2119c37f1185A8434a782723ff59c41xxxxx
Password: c=ETH,scrypt

anything that i do wrong?

[email protected]

newbie

Activity: 21

Merit: 0

Quote from: crackfoo on January 12, 2018, 10:57:07 AM

I already have this message for more than 10 days.

Wallet: CVizZ3nbzqetRcQxsMg2f7p7fq2pUT5WvH
We are short of this currency (23.23542371 CNT). Please STOP your miners and switch to BTC until we find more CNT blocks.
YOU are responsible if you continue to mine for CNT despite this warning.

tonyio

newbie

Activity: 6

Merit: 0

Heads up on the BCH.

I have a BTC address that worked, and was previously paid to correctly.
Today, it suddenly "turned into" a BCH address. It appears to be an issue.

spiroh

newbie

Activity: 7

Merit: 0

Hello, the following address is showing up as BCH but should be BTC. Any chance you can fix it up?

http://zpool.ca/?address=13aMDda472soR17fiPDdzMHcjruc3rtLn1

Thanks very much!

lost.dark

newbie

Activity: 7

Merit: 0

just want to know why is accuracy so low on zpool (with mpm 2.7.1.4)

https://imgur.com/a/cFndr

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: alnash on January 13, 2018, 02:52:19 AM

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

yeah nicehack is fine. I've yet to see anyone push that many miners from NH and anyway they would all be from the same IP's. The botnet's I've banned had thousands of different IP's from different locations. Clearly they have some malware/trojans on computers which they now can control.

malthrax

newbie

Activity: 182

Merit: 0

Quote from: alnash on January 13, 2018, 02:52:19 AM

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

Set up a stratum proxy to point your 1,000 nicehack bot-net at - that way @Zpool won't have to clean up the mess, and you won't boot the rest of us off the pool.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: Westerminer on January 13, 2018, 09:28:18 AM

Quote from: GoldKimber on January 13, 2018, 07:04:26 AM

Quote from: Westerminer on January 13, 2018, 06:41:53 AM

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it. Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck. I hope you get your problem fixed.

GK

I miner Zclassic with cryptopia address and never had problems. It was only using this Zpool that the payment does not leave there. Which Zpool support is it?

it's really quite self-explanatory. Do you not every check your stats on the pool?? Or read the info on the main page?

http://zpool.ca/?address=HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC

Westerminer

newbie

Activity: 4

Merit: 0

Quote from: GoldKimber on January 13, 2018, 07:04:26 AM

Quote from: Westerminer on January 13, 2018, 06:41:53 AM

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it. Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck. I hope you get your problem fixed.

GK

I miner Zclassic with cryptopia address and never had problems. It was only using this Zpool that the payment does not leave there. Which Zpool support is it?

GoldKimber

newbie

Activity: 45

Merit: 0

Quote from: Westerminer on January 13, 2018, 06:41:53 AM

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it. Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck. I hope you get your problem fixed.

GK

Westerminer

newbie

Activity: 4

Merit: 0

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC ( Cryptopia )

I'm in the thick of an answer.

Thanks

variable42

jr. member

Activity: 38

Merit: 1

Quote from: Riptide_NVN on January 13, 2018, 01:54:21 AM

X17 is up again and I've been mining XVG a few hours.

Total Unpaid seems to be growing but not Balance. Perhaps consequently payouts aren't being made.

Am I wasting my time?

No, you're not wasting your time. XVG blocks are just taking a while to confirm. Which means you'll see up to an hour between the time your unpaid balance increases and when your balance increases for each block.

alnash

newbie

Activity: 57

Merit: 0

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

Skvery

newbie

Activity: 2

Merit: 0

c=LTC works but c=DOGE or c=DGE produce Digibyte?

How do I auto-exchange to DOGE?

Quote from: Skvery on January 12, 2018, 07:08:37 PM

Please confirm that c=DOGE is working on zpool.

c-:

hoosierdoc

newbie

Activity: 18

Merit: 0

trying to start mining Gobyte but failing to get data. Here's my command

ccminer-x64 -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -p c=GBX -D

here's the result. Any ideas???

Quote

C:\mine\ccminer>ccminer-x64 -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -p c=GBX -D
*** ccminer 2.2.4 for nVidia GPUs by tpruvot@github ***
Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits

Originally based on Christian Buchner and Christian H. project
Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2018-01-13 02:02:33] POOL 0: neoscrypt.mine.zpool.ca:4233 USER GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -s 10
[2018-01-13 02:02:33] Starting on stratum+tcp://neoscrypt.mine.zpool.ca:4233
[2018-01-13 02:02:33] restart_threads
[2018-01-13 02:02:33] CUDA GPU 0 matches NVML GPU 0 by busId 1
[2018-01-13 02:02:33] CUDA GPU 1 matches NVML GPU 1 by busId 4
[2018-01-13 02:02:33] NVML GPU monitoring enabled.
[2018-01-13 02:02:33] CUDA GPU 0 matches NVAPI GPU 0 by busId 1
[2018-01-13 02:02:33] CUDA GPU 1 matches NVAPI GPU 1 by busId 4
[2018-01-13 02:02:33] NVAPI GPU monitoring enabled.
[2018-01-13 02:02:33] 2 miner threads started, using 'auto' algorithm.
[2018-01-13 02:02:33] Binding thread 0 to cpu 0 (mask 1)
[2018-01-13 02:02:33] Binding thread 1 to cpu 1 (mask 2)
[2018-01-13 02:02:34] sleeptime: 500 ms
[2018-01-13 02:02:34] sleeptime: 500 ms
[2018-01-13 02:02:35] GPU #0: no data
[2018-01-13 02:02:35] GPU #1: no data

Riptide_NVN

member

Activity: 294

Merit: 16

X17 is up again and I've been mining XVG a few hours.

Total Unpaid seems to be growing but not Balance. Perhaps consequently payouts aren't being made.

Am I wasting my time?

GoldKimber

newbie

Activity: 45

Merit: 0

Quote from: GoldKimber on January 12, 2018, 09:42:55 PM

Hello.

Any chance you guys can check the UIS wallet in Lyra2r2?

I believe I should have just had a payout of 40 UIS sent in the past 10 minutes or so, but do not see a Txn ID showing up yet.

In case there is a technical problem, I didn't want to wait too long to raise this concern.

Thanks for checking.

Wallet: UkoDdbPoFzL2VyKxXTdyV7DoQFT3UMe7cV

-GK

There it went! Yay!! Looks to be a 25 min delay. Not sure if that's normal? Sorry for the noob questions.

I also see my Verge wallet finally got paid. I know there are ongoing tech issues there... So thank you for that too!!

Much Appreciated.

GoldKimber

newbie

Activity: 45

Merit: 0

Hello.

Any chance you guys can check the UIS wallet in Lyra2r2?

I believe I should have just had a payout of 40 UIS sent in the past 10 minutes or so, but do not see a Txn ID showing up yet.

In case there is a technical problem, I didn't want to wait too long to raise this concern.

Thanks for checking.

Wallet: UkoDdbPoFzL2VyKxXTdyV7DoQFT3UMe7cV

-GK

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 69. (Read 279601 times)