Topic: [KGC] The future is krugercoin and the future is now! [Official Launch] - page 11. (Read 84923 times)

When restore network?

Any updates? I was solo mining Kruger up until yesterday, I sent a small test amount to cryptsy which went through ok in the morning, a few hours later sent some more coins to cryptsy and they never arrived. my wallet seems to be about 36 blocks behind the block crawler, is there a solution to this? It looks like i've lost 10,000 KGC
How do I get the wallet onto the correct fork.?

Help!

  it look all forked up!!!!!!!!!!!!!!!!!

I got the above data from the wallet dirrectly (rpc command: getblock ). However, I think that the problem started with block 1332352, thus after that there are 2 different blockchains that cannot be compared.

If I am correct from the above timestamps for block 1332352 the correct one should be the 3rd one with the smaller timestamp.

Can Nibiru check this issue?

2014-04-18 12:05:20
1342896 blocks in cryptopoolmining chain, 1342959 in other one.
Do i get it right - the longest chain is right? So why cryptsy is on the shortest? And what would users do when it's found that they deposited 'fake' KGC on exchange?

Did some further troubleshooting and the difference start from block 1332352.

Block 1332351 is the same.
http://explorer.cryptopoolmining.com/block/c1ee97c8238918b76db605899e812f17fd62cb7c5387fc3fcd5701cc826b1bb1
http://54.80.151.165/BlockCrawler/block_crawler.php?block_hash=c1ee97c8238918b76db605899e812f17fd62cb7c5387fc3fcd5701cc826b1bb1

Block 1332352 is different.
http://explorer.cryptopoolmining.com/block/676dfbd5b44f351fe43a1fd0e295570890b8b55bedd71583e7ce4f7461339fc7
http://54.80.151.165/BlockCrawler/block_crawler.php?block_hash=b35fd490a613beded6de020d7fdec3fbbb63c0a23adc3140f9118623d1987ba2

It seems that the problem is in block 1332352:

{
    "hash" : "b35fd490a613beded6de020d7fdec3fbbb63c0a23adc3140f9118623d1987ba2",
    "confirmations" : 0,
    "size" : 233642,
    "height" : 1332352,
    "version" : 1,
    "merkleroot" : "c264f7b9f8453f1439b06d375b1be938292a98300d5b2dbd25ab3c008e3af99e",
    "tx" : [
        "39b61d63633b38655479664b1d3ad9620e5755d591953e2aaccbc13474a4f299",
        "1a3cc1c955348d2a7af76ea459738f2a98efeadeeffdde3bd8d1c94dc12f08cd",
        "c8f809e1b8473d237a4caec7c61202b6cede2429c1c38624a4168b016428ba28",
        "ce04cf71b6cfb507ddf565129c74bddd79edea925f35ac7e6f5df5cf95f5896c",
        "7dbd2a478a4a22c751e00e831662eae4b5d5eb192bc38a9d3dc569f88746d965",
        "2d6eb59ba8139a25131ef4febd0123c00208faf8f8584296cef3ebec3327427a",
        "830a7aab1ff04004d17e46a71692d11da74ccad5b7931512f4482fb7b7e44b5b"
    ],
    "time" : 1397665532,
    "nonce" : 2978415616,
    "bits" : "1e04a538",
    "difficulty" : 0.00084088,
    "previousblockhash" : "c1ee97c8238918b76db605899e812f17fd62cb7c5387fc3fcd5701cc826b1bb1"
}

{
    "hash" : "a55922b2e957f876d8143408ac442e020049b954969a668d1df2d124148e3ba2",
    "confirmations" : 0,
    "size" : 93912,
    "height" : 1332352,
    "version" : 1,
    "merkleroot" : "1813ec2a72a92177e6779e2207613e0eabc799b2d9a2b5f238c4fe33c60e28b6",
    "tx" : [
        "190808709d8d78a957cace42ea50a1f96215018bc0163c5f2c3828ed792f52b0",
        "1a3cc1c955348d2a7af76ea459738f2a98efeadeeffdde3bd8d1c94dc12f08cd",
        "c8f809e1b8473d237a4caec7c61202b6cede2429c1c38624a4168b016428ba28"
    ],
    "time" : 1397665537,
    "nonce" : 3281717760,
    "bits" : "1e04a538",
    "difficulty" : 0.00084088,
    "previousblockhash" : "c1ee97c8238918b76db605899e812f17fd62cb7c5387fc3fcd5701cc826b1bb1"
}

{
    "hash" : "676dfbd5b44f351fe43a1fd0e295570890b8b55bedd71583e7ce4f7461339fc7",
    "confirmations" : 10515,
    "size" : 186429,
    "height" : 1332352,
    "version" : 1,
    "merkleroot" : "c9dad72a1c427e15ab7ef53bb6cb8d2e151216a506364b11dc33796bb8d95dfc",
    "tx" : [
        "553d984d4602571517cf8d0a50ccfbd68a764b1d4f8bc2a97bf5264a25ff8cff",
        "c8f809e1b8473d237a4caec7c61202b6cede2429c1c38624a4168b016428ba28",
        "ce04cf71b6cfb507ddf565129c74bddd79edea925f35ac7e6f5df5cf95f5896c"
    ],
    "time" : 1397665525,
    "nonce" : 3253144320,
    "bits" : "1e04a538",
    "difficulty" : 0.00084088,
    "previousblockhash" : "c1ee97c8238918b76db605899e812f17fd62cb7c5387fc3fcd5701cc826b1bb1",
    "nextblockhash" : "8837e2eea34287a1a032fcabba29de5cffaac24f98ac81f216854271dafb1bf3"
}

Just did the same and received from cryptsy

I don't think this blockexplorer is on the current blockchain!
I just mined some KGC and sent to cryptsy, it's ok, coin received.

Is there any other KGC pool that is in the following blockchain that is longer than ours?
http://54.80.151.165/BlockCrawler/block_crawler.php

I think also p2p pool (http://94.23.196.92:22222) is on the same blockchain as ours

Only botpool is forked, your pool seems to be on the right blockchain (same as ours)

We will shutdown the pool (https://www.cryptopoolmining.com/kgc/) until this is resolved, in order to avoid any losses for the miners.

As i see, fork has happened.
Here is the longest chain: http://54.80.151.165/BlockCrawler/block_crawler.php

I have the same problem. 

http://kgc.botpool.net/ is not transferring the krugercoin for my wallet.

they do not respond to my emails.

 

May be your hard drive is full ?

what happened to the network KGC?

I can't find transaction ID because KGC never appeared in my wallet

Do you have the transaction ID ?

Hi.
I was mining at http://kgc.botpool.net/ and I didn't receive my coins. Amount: about 1000 KGC.
Any ideas why?

Krugercoin Bootstrap.dat



   bootstrap.dat

bootstrap.dat allows a new Krugercoin client (not synced) to rapidly import the initial blocks from a
local file instead of slowly downloading blocks from random peers. This significantly reduces the
time it takes to get a client synced with the current blockchain.

Simply having bootstrap.dat in Krugercoin's expected data directory will make your initial block sync
much faster. The import process can be even faster if you use the -dbcache=1000 command line
parameter which uses an additional 1GB of RAM for the database index cache.

   Extracting the bootstrap.dat.xz

Regardless of your operating system, use the following steps to make use of the bootstrap.dat file:

1.   Download bootstrap.dat.xz from mirrors or torrent.
2.   Decompress the bootstrap.dat.
3.   Put it into the Krugercoin datadir. "%appdata%/krugercoin" / "~/.krugercoin"
         (This is the same folder that contains wallet.dat and the blocks folder.)
4.   Delete bootstrap.dat.old if you want to recover some storage space.

    Krugercoin Data Folder

    Linux
Krugercoin's data directory is located in ~/.krugercoin/ by default. You can run ls -a to see
directories that start with a period. You can also search for the directory with the following
command:

   Mac
You can obtain xz from MacPorts or http://macpkg.sourceforge.net/.
Krugercoin's data directory should be located in ~/Library/Application Support/krugercoin/.

   Windows
7Zip is a free utility that can decompress .xz files, so does the latest version of WinRAR.

Click on Start then Run (or press WinKey+R) and type:
Krugercoin's data directory will open. "AppData" and "Application Data" are hidden by default in
Windows.

   Copy bootstrap.dat to data directory

Copy the bootstrap.dat to your data directory. Load the Krugercoin client and wait for it to load the
blocks. After loading is complete, the bootstrap.dat will be renamed to bootstrap.dat.old at which
point you can choose to delete it.

Krugercoin - 4/9/2014 - 508,600 KB

GoogleD - https://drive.google.com/file/d/0Bz3NalaCIrQrQ0NEdWZldmN6LVk
Torrent - https://drive.google.com/file/d/0Bz3NalaCIrQrWUQ4Z0tQZjJxQk0

E-nautia Mirror - http://e-nautia.com/jon.marshall/disk/bootstrap/krugercoin/bootstrap.dat.xz
E-nautia Direct - https://e-nautia.com/disk/download.php?id=5450924

Krugercoin Donation Address: YqrcSr9rwN9Z5fLKfLyDBa9CXMFQon8hMa