Topic: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ (Read 21686 times)

Due to Lauda hitting me with False Negative Trust Ratings, and the fact Theymos continues to allow her to abuse others Trust ratings at her whim.  I expressed my considerable displeasure at such incompetence by the BTCTalk Admin/Theymos his staff and Lauda.

To which my only real reply from them from a 30 day ban, where I was unable to update this snapshot service.

So this entire forum has become unreliable , so my snapshot service is moving forever.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349  
for the updated Service.

For any that care, under the reputation forum you can see what kind of person Lauda is, and how flacid Theymos is by ignoring her.
https://bitcointalk.org/index.php?board=129.0
Lauda and hilariousandco -> Proven to Abuse Trust (Corrupt + Poisonous)
https://bitcointalksearch.org/topic/lauda-and-hilariousandco-proven-to-abuse-trust-corrupt-poisonous-1951543

I am being given neg feedback for political reasons
https://bitcointalksearch.org/topic/i-am-being-given-neg-feedback-for-political-reasons-1960244


 

Lauda has Defamed my Good Name,  Theymos has been too cowardly to respond about fixing his bullshit broken trust system.
 










 

ZEIT Snapshot is less than 10 days old, you should be able to sync that in less than an hour or two.

Bitbean is now updated to 4-04-2017.

Sorry don't have any Piggy snapshots.


 

Eh, again POS wallet stuck on linux. 18 March – BitBean and Piggy... and 24 March – Zeit.

Please if you can upgrade BitBean and Zeit SnapShot I move all my coins to PoSWallet for staking.

And maybe you have also Piggy SnapShot? :>

Free accounts on Mega are 50 Gig, more than enough,
however if your account is full, just download by doubleclicking on the file and it should start downloading it,
Don't close the web page until it says download complete, if you close the web page it will cancel the download.

You may want to post in the Mint forum, and ask them for a recent bootstrap, this snapshot on my site is from last year , and I have tried updating it , but the wallet has so many orphans that updating was proving more time consuming that what I could dedicate to it.

I have been waiting for them to release their new wallet , in hope that the orphan sync problem would be gone.  
Still waiting.

 

Thank you!

my mega is only free account.. file is too large.. is thier anyway to download snapshots? thanks

Make Sure you updated your 1337 Wallet Version to v1.7.0.0-g

New Snapshot is Up to 3-24-2017.  


 

@kiklo, would you be able to update the 1337 blockchain snapshot? Myallet stuck after 15 march and i can not stake

Sure , the snapshot just saves you the time of having to sync the blockchain from scratch.
After it is fully synced from your PC, you use it normally.

Uploading the Updated Snapshot right now, check the download site in 1½ hour from now and download the blackcoinblockchainsnapshot-2017-3-22,
it will sync in a few minutes after installing.
Go here for the instructions and download link:
https://bitcointalksearch.org/topic/m.15441053

FYI:
I removed the older one, since the newer one will be up in an hour.

Thank you for the great work you do kiklo!

With this blackcoin snapshot will I be able to stake coins?

Last Blackcoin snapshot was 4 months ago, so it would probably take ~8 to 12 hours to sync after installing it.

However since you asked about it, I am syncing it now, and will update this post , when the snapshot is at today's date,
It will take less than 1 hour to sync with that one, if you can wait.
Will Post here when the snapshot is updated.


 

Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot?

Done   


 

Please correct the link of "List of AddNodes" of Sprouts.
https://www.cryptopia.co.nz/BlockExplorer?coin=SPRTS

I know these links:
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network

Nice work with the snapshots.

Left the above message, bitbay dev has not contact me, deleting Bitbay Snapshot as it was broken by their bootstrap.dat being included in the wallet download.

@Kiklo
I have seen your post in the Bitbean thread.

Great idea and service.

Thank you!

Thanks for this idea, I have implemented it to Bismuth explorer core

Status Update for the Blockchain Service

Services for BlockChain SnapShots
Coins using the Paid Service
Direct Link to Snapshot download
Exact Date created included in the Snapshot Post
SHA-256 Hash Generated so you can verify the File download matches the original created file.
Snapshot & BootStrap Updated every 2 weeks
Current Price is 250 thousand ZEIT per month per coin to add these options.
(Only ZEIT Accepted)

ZEIT can be purchased at any of the following exchanges.
@ alcurex & CoinXchange & Cryptopia & Nova Exchange & SouthXchange

All coins that are using only the free service, snapshots will be updated every ~5 months.


 

Thanks again for this service just used it to reload the noble coin wallet. Thanks for your hard work. Fish

Thanks Kiklo!!
much appreciated!

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


CLOAKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.9.7.56  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      CloakcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a CloakCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from CloakcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Cloakcoin is closed
Go under c:\Users\"username"\AppData\Roaming\CloakCoin (for Windows) or in the Cloakcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from CloakcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\CloakCoin
Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot.

Once your Cloakcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Cloakcoin-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



EINSTEINIUM BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.9.0.0-unk-beta used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      EinsteiniumBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Einsteinium folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from EinsteiniumBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Einsteinium is closed
Go under c:\Users\"username"\AppData\Roaming\Einsteinium (for Windows) or in the Einsteinium data folder for other OSes
Then Delete 3  files :  .lock & db.log & debug.log
Then Delete 2 folders named : blocks & chainstate
Then Extract and copy the files from EinsteiniumBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Einsteinium
Then open Einsteinium and it will start syncing the BlockChain from the last snapshot.

Once your Einsteinium Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Einsteinium-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

Sure it will be a ~week or so,
Hyper           √
Einsteinium  √
Cloakcoin    √

 

If possible to add CloakCoin (CLOAK) to the list?
 
http://cloakcoin.com/

Regards

BitBay snapshot removed New wallet release breaks the Snapshot.

BITBAY BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.0.0.1-g  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BitBayBlockChainSnapShot-(Date Created).rar
Download :    N/A

NEW Wallet: Install Instructions
Make a BitBay folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBayBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BitBay is closed
Go under c:\Users\"username"\AppData\Roaming\BitBay (for Windows) or in the BitBay data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitBayBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BitBay
Then open BitBay and it will start syncing the BlockChain from the last snapshot.

Once your BitBay Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BitBay-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/bay/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

Sure,  

Just started Syncing from Scratch, will post Snapshot & Bootstrap links in a few day.

Later,
Kiklo

Would you be willing to add BitBay (BAY) to the list?

nice kiklo ...

ill continue following this thread now mate ...

#crysx

ZEIT by itself will use a little over ~1GB of ram, if the system does not have at least 2 GB, it is probably going to be more trouble than success.
(System is probably Page Thrashing (http://www.geekinterview.com/question_details/3333) )


 

Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story.
I stopped it and start it new with bootstrap.dat .
By watching the content of debug.log it seems to be  a slow but continous process. I will try this.

The System ist a Rapsberry PI 3 with 1GB Ram.

Hmm,
Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date.
If that updated snapshot fails, you could use the updated bootstrap instead.
(How much ram is in your system?)

 

FYI:

Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version)
I tried it, but after 1 Day it seems to be stuck at 500 Blocks

A bootstrap.dat file allows a new wallet (not synced) to rapidly import the initial blocks from a local file instead of slowly downloading blocks from random peers
across the internet. Since you are pulling the blocks from your hard drive it is much faster than using the internet.
However when importing blocks the wallet does have to verify every block, which means a 2 or 3 year old chain can take a few days to import and tie up your memory & processor while verifying the blocks.

A Snapshot is a copy of the entire Wallet Database at the time the snapshot was made, it will already include any database directories & all database files.
It can be downloaded from the internet and it will start syncing from where it was created, without having to re verify and recreate the other database files & directories.
If you download & install a snapshot only created a day or so ago, after installing the snapshot it will be less than 1 hour before your wallet is synced and running.

Pros:
Snapshot will always be faster, as no re-verification of blocks is done.
Bootstrap will always be a smaller download, since it does not include all of the database files, just the one needed for the bootstrap.dat .

Cons:
Snapshots will always be a Bigger Download.
Bootstraps will always take more time to re-verify the blocks and tie up your PC.


 

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


808 BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      808-BlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a 808 folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from 808-BlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\808
Then open 808 and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure 808 is closed
Go under c:\Users\"username"\AppData\Roaming\808 (for Windows) or in the 808 data folder for other OSes
Then Delete 6  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log & addr.dat
Then Delete 1 folder named : database
Then Extract and copy the files from 808-BlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\808\
Then open 808 and it will start syncing the BlockChain from the last snapshot.

Once your 808 Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run 808.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=808

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



DIAMOND BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.1.0.4 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      DiamondBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Diamond folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from DiamondBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Diamond
Then open Diamond and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Diamond is closed
Go under c:\Users\"username"\AppData\Roaming\Diamond (for Windows) or in the Diamond data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from DiamondBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Diamond
Then open Diamond and it will start syncing the BlockChain from the last snapshot.

Once your Diamond Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Diamond-qt-2104.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/dmd/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months


Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


E-CurrencyCoin BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version 2.4.7.5 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      E-CurrencyCoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a ECCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from E-CurrencyCoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\ECCoin
Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure E-CurrencyCoin is closed
Go under c:\Users\"username"\AppData\Roaming\ECCoin (for Windows) or in the E-CurrencyCoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from E-CurrencyCoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\ECCoin
Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot.

Once your E-CurrencyCoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run ECCoin-qt.exe -rescan  
will take a little while but should correct your balance info.


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


EVERGREENCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.6.0.1 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      EverGreencoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a EverGreenCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from EverGreencoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\EverGreenCoin
Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure EverGreenCoin is closed
Go under c:\Users\"username"\AppData\Roaming\EverGreenCoin (for Windows) or in the EverGreenCoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from EverGreencoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\EverGreenCoin
Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot.

Once your EverGreenCoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run EverGreenCoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of Seed Nodes
seed.evergreencoin.org DDoS protected
seed2.evergreencoin.org
egc-seed1.granitecoin.com
egc-seed2.granitecoin.com
egc-seed3.granitecoin.com
egc-seed4.granitecoin.com
egc-seed5.granitecoin.com


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


1337 BLOCKCHAIN SNAPSHOT
            (The Fastest Way to Sync)

Wallet Version v1.7.0.0-g  used with this Snapshot  
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:   1337BlockChainSnapShot-(Date Created).rar
Download:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a 1337 folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from 1337BlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\1337
Then open 1337-qt.exe and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure 1337 is closed
Go under c:\Users\"username"\AppData\Roaming\1337 (for Windows) or in the 1337 data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from 1337BlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\1337
Then open 1337 and it will start syncing the BlockChain from the last snapshot.

Once your 1337 Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run 1337-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
http://chain.blockpioneers.info/1337/nodes.php

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months


Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


NETCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.5.0.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      NetcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Netcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from NetcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Netcoin
Then open Netcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Netcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Netcoin (for Windows) or in the Netcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 2 folders named : database  txleveldb
Then Extract and copy the files from NetcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Netcoin
Then open Netcoin and it will start syncing the BlockChain from the last snapshot.

Once your Netcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Netcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=NET

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


PANDACOIN BLOCKCHAIN SNAPSHOT
            (The Fastest Way to Sync)

Wallet Version 3.0.2  used with this Snapshot  
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      PandacoinBlockChainSnapShot-2017-4-26.rar
SHA-256:       27CBD88086E0CB49508FFBE1753D02D410B1CEE9EA9BB84D84E9C4EF371CEF8C
Direct Link :   https://mega.nz/#!Cd5FRK6Y!a3FmFlKmxGdv0t6xRNEvl083rzcIU_NEMXBPp07suWA
General Link:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

http://onlinemd5.com can be used to verify the above SHA-256 checksums.

NEW Wallet: Install Instructions
Make a Pandacoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from PandacoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Pandacoin
Then open Pandacoin-qt.exe and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Pandacoin is closed
Go under c:\Users\"username"\AppData\Roaming\Pandacoin (for Windows) or in the Pandacoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from PandacoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Pandacoin
Then open Pandacoin and it will start syncing the BlockChain from the last snapshot.

Once your Pandacoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Pandacoin-qt -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/pnd/#!network


Premium Service Status     =>   Active  =  SnapShot & BootStrap Updated Every 2 Weeks

ZEIT Address  =>   MYD6NvCFBhUrCKSA97dCUo4Dpprk1h7Lvz

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



PHILOSOPHERSTONE BLOCKCHAIN SNAPSHOT
            (The Fastest Way to Sync)

Wallet Version V 1.6.5.0-gx used with this Snapshot  
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:   PhilosopherstoneBlockChainSnapShot-(Date Created).rar
Download:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Philosopherstone folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from PhilosopherstoneBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Philosopherstone
Then open Philosopherstone-qt64.exe and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Philosopherstone is closed
Go under c:\Users\"username"\AppData\Roaming\Philosopherstone (for Windows) or in the Philosopherstone data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from PhilosopherstoneBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Philosopherstone
Then open Philosopherstone and it will start syncing the BlockChain from the last snapshot.

Once your Philosopherstone Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Philosopherstone-qt64.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=PHS

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



TRUCKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.0.0.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      TruckcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Truckcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from TruckcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Truckcoin
Then open Truckcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Truckcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Truckcoin (for Windows) or in the Truckcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from TruckcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Truckcoin
Then open Truckcoin and it will start syncing the BlockChain from the last snapshot.

Once your Truckcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Truckcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
http://www.presstab.pw/phpexplorer/TRK/nodes.php

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

If you look at the OP, 1st Post lists all of the coins available
https://bitcointalksearch.org/topic/m.14024451
The Last one for Tek was from 5-24-2016,
they are not paying for the premium service which is updated every 2 weeks so their updates are ~ 2 months.

However since I know you need one, check back in a few hours, I will do a up to date sync.

 


Update :
Tek Synced to 7-18-2016 , Bootstrap & SnapShot are Updated
Snapshot is Fastest way , Bootstrap can take a day or two
Direct Link to Tek SnapShot Post
https://bitcointalksearch.org/topic/m.14309285

FYI:
the 1st Post of this topic is always updated to show the coins available and links to their snapshops or bootstraps.

Do you have tekcoin snapshot & bootstrap, i need 2 days to sync and it's still syncing until now

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



SATIVACOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version  v1.3.0.0  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      SativacoinBlockchainSnapshot-2017-4-24.rar
SHA-256:       D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5
Direct Link :   https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fU
General Link:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

http://onlinemd5.com can be used to verify the above SHA-256 checksums.

NEW Wallet: Install Instructions
Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sativacoin is closed
Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SativacoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.

Once your Sativacoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sativacoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=STV

Premium Service Status     =>   Active  =  SnapShot & BootStrap Updated Every 2 Weeks

ZEIT Address  =>    MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


BOTTLECAPS BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BottlecapsBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BottleCaps
Then open BottleCaps and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bottlecaps is closed
Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BottlecapsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BottleCaps\
Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot.

Once your BottleCaps Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bottlecaps-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
http://www.presstab.pw/phpexplorer/CAP/nodes.php

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


BLACKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.2.4  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BlackcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Blackcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BlackcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.

Once your Blackcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Blackcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/blk/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

LOL,
I think you just did.


 

Thanks Kiklo for these SnapShots of the BlockChains. 

I just started giving interest in BitBean (BITB). So, I want to know the minimum block size of BitBean for sprouting this coin. Can you recomanded the minimum BlockSize of BitBean?

As I reccommand the minimum BlockSize of SproutsCoin (SPRTS) is 150K. If you remain open and online Sprouts (SPRTS) wallet daily for 4-5 hours the blocks with 150K can easily mint in 10-20 days. The blocks smaller than 150K (i.e. 100K or 80,000 etc.) will also mint, but it will take more time to mint i.e. 30-40 days. Similarly the blocks bigger than 200K will mint in less than 10 days.
And the posotive side of Sprouts is that every blocks mint even a block with 50,000 coins, but it will take around 50-55 days. And you get exact @ 2% daily.

If a block with 150K SPRTS mints after 15 days you will get 45,000 SPRTS (@3,000 daily for 15 days). And the block will be splited into two parts, i.e. two blocks with 97,500 SPRTS each [(150,000 + 45,000) / 2] unlikely PayCoin (XPY), the blocks of XPY doesnot get splited, you get minted amount in a new "Custom Change Address".

Please share this information about BitBean.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



NOBLECOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.0.2.0  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      NobleBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a NoblecoinPOS folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from NobleBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Noblecoin is closed
Go under c:\Users\"username"\AppData\Roaming\NoblecoinPOS (for Windows) or in the NoblecoinPOS data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from NobleBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS\
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.

Once your Noblecoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Noblecoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/nobl/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



SPROUTS BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      SproutsBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

http://onlinemd5.com can be used to verify the above checksums.

NEW Wallet: Install Instructions
Make a Sprouts folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SproutsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Sprouts
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sprouts is closed
Go under c:\Users\"username"\AppData\Roaming\Sprouts (for Windows) or in the Sprouts data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from SproutsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Sprouts\
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.

Once your Sprouts Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sprouts.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


BTCTALKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.5.2.0  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BTCtalkBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a BTCtalkcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BTCtalkBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BTCtalkcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BTCtalkcoin (for Windows) or in the BTCtalkcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BTCtalkcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin\
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.

Once your BTCtalkcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BTCtalkcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/talk/#!network
https://novaexchange.com/addnodes/TALK/


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


BITBEAN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 1.1.0.0-g32a928eRC1  used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      BitBeanBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Bitbean folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBeanBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bitbean is closed
Go under c:\Users\"username"\AppData\Roaming\Bitbean (for Windows) or in the Bitbean data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitbeanBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.

Once your Bitbean Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bitbean-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
https://chainz.cryptoid.info/bitb/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


TEKCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 2.4.1 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      TekcoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a Tekcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from TekcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Tekcoin
Then open Tekcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Tekcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Tekcoin (for Windows) or in the Tekcoin data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from TekcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Tekcoin
Then open Tekcoin and it will start syncing the BlockChain from the last snapshot.

Once your Tekcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Tekcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of AddNodes
http://www.presstab.pw/phpexplorer/TEK/nodes.php

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 


SUPERCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version Ver 4.0.1.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      SupercoinBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
* File is over 1 Gig , Download with MegaSync *

NEW Wallet: Install Instructions
Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Supercoin is closed
Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SupercoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.

Once your Supercoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Supercoin-qt.exe -rescan  
will take a little while but should correct your balance info.

(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)

List of Addnodes:
https://chainz.cryptoid.info/super/#!network

Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



KOBOCOIN BLOCKCHAIN SNAPSHOT
                 (The Fastest Way to Sync)

Wallet Version  v2.1.0.3 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      KoboBlockChainSnapShot-(Date Created).rar
Download :    https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

http://onlinemd5.com can be used to verify the above checksums.

NEW Wallet: Install Instructions
Make a Kobocoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from KobocoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Kobocoin is closed
Go under c:\Users\"username"\AppData\Roaming\Kobocoin (for Windows) or in the Kobocoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from KobocoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.

Once your Kobocoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run kobocoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of Addnodes:
http://www.presstab.pw/phpexplorer/KOBO/nodes.php


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months

Click Here to See a List of All Available SnapShots.

Thanks for these bootstraps Kiklo!!

100% agree on this, says the BTCTalk Coin guy

you is listed in OP, i'll put up the standard link if needed, right now short and sweet
https://bitcointalksearch.org/topic/talk15bitcointalk-est2014yr4-btc-864994

Thanks,

if you add this link , it will take them straight to the top of the OP.

 

Actually, I considered it, but at this point no real need for a web site., may never need one. 
Better to use BTCTalk , as a medium for communication instead of recreating everything with a web site.

If you decide to list me , Here is a clickable url:
Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins
Copy and Paste the Following Text for a clickable link:
Logo, you can resize to whatever dimensions needed.



 


FYI:
I will get TALK added to the Bootstrap list in the next week or so. 

Kiklo

Thanks for the Kobocoin add. It's very much appreciated! I will let the community know.

Bounty on it's way to you. Great service. Keep it up!

kiklo
get yourself a website for this and a logo
will list in the TALK .biz directory

This is a very clever idea for faster syncing of most PoS coins. I have always been looking for something like this and now I can go here each time to speed up the process of some coins that I am holding. The ones I like the most are Tekcoin and Diamond. 

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



HOBONICKEL BLOCKCHAIN SNAPSHOT
            (The Fastest Way to Sync)

Version 1.5.1.0-gf46fa0c-V1.5 used with this Snapshot  
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:   HBNBlockChainSnapShot-(Date Created).rar
Download:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

NEW Wallet: Install Instructions
Make a HoboNickels folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from HBNBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickels-qt.exe and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure HoboNickels is closed
Go under c:\Users\"username"\AppData\Roaming\HoboNickels (for Windows) or in the HBN data folder for other OSes
Then Delete 5  files :  .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from HBNBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickel and it will start syncing the BlockChain from the last snapshot.

Once your HBN Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run HoboNickels-qt.exe -rescan  
will take a little while but should correct your balance info.


List of Addnodes:
http://www.presstab.pw/phpexplorer/HBN/nodes.php


Premium Service Status     =>   INACTIVE  =  SnapShot & BootStrap Updated ~5 Months


Click Here to See a List of All Available SnapShots.

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349 
for the updated Service.

 



ZEIT  BLOCKCHAIN SNAPSHOT
            (The Fastest Way to Sync)

Latest Version  2.0.1.7 Gauntlet

Windows:   http://zeit-coin.net/beta/zeitcoin-qt.exe
MacOS:      http://zeit-coin.net/beta/zeitcoin-2017-gauntlet.dmg
Linux   :     https://github.com/zeitcoin/zeitcoin
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example:  http://rarlabs.com/download.htm

Filename:      ZeitBlockChainSnapShot-2017-05-10.rar
SHA-256:       B9D8F5E9A6ACEB4181452913A877BB8C00103D8D70A9D3708F673A6AF1DC1FBE
Direct Link :   https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2c
General Link:  https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg

http://onlinemd5.com can be used to verify the above checksums.

NEW Wallet: Install Instructions
Make a Zeitcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from ZeitcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.    

ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Zeitcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Zeitcoin (for Windows) or in the Zeitcoin data folder for other OSes
Then Delete 4  files :  .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from ZeitcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.

Once your Zeit Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run zeitcoin-qt.exe -rescan  
will take a little while but should correct your balance info.

List of Addnodes:
https://chainz.cryptoid.info/zeit/#!network

Click Here to See a List of All Available SnapShots.

How to install a Bootstrap.dat file

After downloading and uncompressing the rar file  ,

Start up your new Wallet software,
after it opens, then Close it, (In windows , this allows the new wallet to create the folder under C:\Users\"username"\AppData\Roaming\WalletNameHere )

Copy the bootstrap.dat file in the folder c:\Users\"username"\AppData\Roaming\WalletNameHere (for Windows) or in the WalletNameHere data folder for other OSes. Now Start the New Wallet to import the BootStrap.dat , (Depending on your PC and the size of the bootstrap , this can take many hours) (You can watch the progress of the import by opening the folder c:\Users\"username"\AppData\Roaming\WalletNameHere and watch the blk0001.dat file size to see how close it is to the bootstrap.dat to get a feel for how much longer it might be)  once finished it will then begin synchronization to retrieve any blocks found after the Bootstrap was created. (Tech Note, the wallet does not completely Open until it finishes the Import.)

Bootstraps can dramatically decrease the time required to sync a new wallet, especially one that is over a year old.
The only thing faster is a Blockchain Snapshot , which is currently the fastest way to sync a coin.

This Bootstrap service is basically free, we would appreciate it if the people running the OPs would place a link to us here, that frees them from the tedious work of keeping a bootstrap updated where they can focus their time on more important matters, and in exchange we will update their Bootstrap on a ~ 2 monthly basis.

 

Bootstraps can be downloaded from the Blockchain Folder at
https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg

This Snapshot service have moved, because of the btctalk's broken trust system

Go to https://www.cryptopia.co.nz/Forum/Thread/1349  
for the updated Service.

 

_______________________________________________________________________________ _______




Kiklo's Premium Blockchain Snapshot Service

You will need a program that can uncompress rar files to access the files.
example:  http://rarlabs.com/download.htm
Tech Tips: Always scan a download for Viruses before installing , one such service is https://www.virustotal.com .

Our Blockchain Snapshots can be installed on a New or Already Working Wallet.
SnapShots will install much Faster than the BootStraps.
Difference between a Bootstrap vs a Snapshot.

Instructions on How to Install a Bootstrap.dat file is on the very next Post.
Instructions on How to Install a SnapShot is included when you click on the SnapShot Link in the following table.

Coins...............................	Blockchain Snapshop	BootStrap.....................	BTCTALK FORUM...........
808	808 Snapshot	N/A	808 Forum
1337	1337 Snapshot	N/A	1337 Forum
BitBean	BitBean Snapshot	N/A	BitBean Forum
Blackcoin	BlackCoin Snapshot	N/A	Blackcoin Forum
Bottlecaps	BottleCaps Snapshot	N/A	Bottlecaps Forum
BTCtalkcoin	BTCtalkcoin Snapshot	N/A	BTCtalkcoin Forum
CloakCoin	Cloakcoin SnapShot	N/A	Cloakcoin Forum
Diamond	Diamond SnapShot	N/A	Diamond Forum
E-CurrencyCoin	E-CurrencyCoin SnapShot	N/A	E-CurrencyCoin Forum
Einsteinium	Einsteinium SnapShot	N/A	Einsteinium Forum
EverGreenCoin	EverGreenCoin SnapShot	N/A	EverGreenCoin Forum
HoboNickels	HoboNickel SnapShot	N/A	HoboNickels Forum
Kobocoin	Kobocoin SnapShot	N/A	Kobocoin Forum
Mintcoin	Mintcoin SnapShot	N/A	Mintcoin Forum
Netcoin	Netcoin SnapShot	N/A	Netcoin Forum
Noblecoin	Noblecoin SnapShot	N/A	Noble Forum
Pandacoin	Pandacoin Snapshot	BootStrap	Panda Forum
PhilosopherStone	PhilosopherStone Snapshot	N/A	PHStone Forum
SativaCoin	SativaCoin Snapshot	BootStrap	SativaCoin Forum
Sprouts	Sprouts Snapshot	N/A	Sprouts Forum
Supercoin	Supercoin Snapshot	N/A	Supercoin Forum
Tekcoin	Tekcoin Snapshot	N/A	Tekcoin Forum
Truckcoin	Truckcoin Snapshot	N/A	Truckcoin Forum
ZEIT	ZEIT SNAPSHOT	BootStrap	ZEIT Forum

_______________________________________________________________________________ _____
Services for BlockChain SnapShots
Direct Link to Snapshot download
Exact Date created included in the Snapshot Post
SHA-256 Hash Generated so you can verify the File download matches the original created file.
Snapshot & BootStrap Updated every 2 weeks
Current Price is 250 thousand ZEIT per month per coin to add these options.
(Only ZEIT Accepted)

Direct Link to the top of this OP.