LightningAsic Gridseed Controller Firmware V3 - page 12.

sandor111

hero member

Activity: 616

Merit: 500

Quote from: Xer0 on April 14, 2014, 02:01:27 PM

"Firmware with name 'LAG3355_12-RC10d' is not found"

tried with Chrome, IE and Firefox on a Windows XP PC

anyone has the RC10c?

No problems here. Here is the full list: http://www.lightningasic.com/firmware/md5/md5.txt
https://www.dropbox.com/s/cetsoqgn2t5ail3/LAG3355_12-RC10c.bin

Xer0

hero member

Activity: 826

Merit: 1000

°^°

"Firmware with name 'LAG3355_12-RC10d' is not found"

tried with Chrome, IE and Firefox on a Windows XP PC

anyone has the RC10c?

sandor111

hero member

Activity: 616

Merit: 500

Quote from: Louste on April 14, 2014, 01:20:42 PM

Quote from: xstr8guy on April 02, 2014, 01:52:27 PM

Quick, someone port this over to rPi!

Have ported V1 LightningAsic wiibox to PI (works quite well!) does anyone know how i can access v3 703n they seem to have removed all ways of telnet, SSH and even removed serial console access!

Simple answer, you can't.

Louste

newbie

Activity: 2

Merit: 0

Quote from: xstr8guy on April 02, 2014, 01:52:27 PM

Quick, someone port this over to rPi!

Have ported V1 LightningAsic wiibox to PI (works quite well!) does anyone know how i can access v3 703n they seem to have removed all ways of telnet, SSH and even removed serial console access!

sandor111

hero member

Activity: 616

Merit: 500

Quote from: amix on April 14, 2014, 01:04:20 PM

get some errors the grid wont hash!

[2014-04-14 18:01:50] USB bus not found, try to open the USB controller power
[2014-04-14 18:02:00] New miner device(s) found: 8D#########4 (ACM0)
[2014-04-14 18:02:00] LTC process shutdown

done power cycle of tp link and gridseeds of every possible combo no joy Sad

I don't see anything unusual, are they 'running'? Can you post the miner log?

amix

member

Activity: 84

Merit: 10

get some errors the grid wont hash!

[2014-04-14 18:01:50] USB bus not found, try to open the USB controller power
[2014-04-14 18:02:00] New miner device(s) found: 8D#########4 (ACM0)
[2014-04-14 18:02:00] LTC process shutdown

done power cycle of tp link and gridseeds of every possible combo no joy Sad

amix

member

Activity: 84

Merit: 10

any chance of being able to change the time zone? would be really nice and alot more convient to have the local time zone.
And i think itd be reasonable - especailly as it contected to the net, to be able to change the login details. in fact have a login fullstop. someone starts probing the networks and itll only be a sort time before someone gains access to the tp link or whatever else, you come back to find your mining for someone else!
Bit of security and peace of mind please.

amix

member

Activity: 84

Merit: 10

Quote from: sandor111 on April 14, 2014, 09:32:38 AM

Quote from: amix on April 14, 2014, 09:17:19 AM

brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.

By default it let's the router assign an IP by DHCP.

Thanks just did a reset and plugged it into the router , then had to dig about in my router settings - darn thing doesnt support openwrt Cry

- through process of elimation manage to find it, its now uploading the firmware oohhhh

sandor111

hero member

Activity: 616

Merit: 500

Quote from: amix on April 14, 2014, 09:17:19 AM

brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.

By default it lets the router assign an IP by DHCP.

amix

member

Activity: 84

Merit: 10

brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.

li_gangyi

full member

Activity: 157

Merit: 100

Anyways just to let you guys know. I have successfully used the serial TTL and terminal + TFTP method to restore a bricked controller. Upload the v1 image in 1st and then from there the actual V3 firmware itself. If you get stuck doing that, do post where you are at.

simon66

sr. member

Activity: 423

Merit: 250

I'm a bit confused with the Tp-link WR703N. Does it serve as a "PC" where I just connect my units to it and access the TP-LINK panel from my other home computer (Of course I'm assuming both are connected to the same network).

Thanks!

noise23

legendary

Activity: 968

Merit: 1002

Quote from: sandor111 on April 13, 2014, 06:39:07 PM

Honestly no idea what that error means, maybe the pool operator can help...

OK, thanks for your time.
Not a big deal anyway, now I run Gridseeds with these pools via Raspberry Pi, cgminer works good with them.

sandor111

hero member

Activity: 616

Merit: 500

Honestly no idea what that error means, maybe the pool operator can help...

noise23

legendary

Activity: 968

Merit: 1002

Quote from: sandor111 on April 13, 2014, 06:03:01 PM

Quote from: noise23 on April 13, 2014, 10:38:14 AM

Just installed LAG3355_12-RC10d.bin - it still does not work with many pools.
fr.hbn.theblocksfactory.com:3336 , hbn.stratum.smartmining.net:17373 and many others just give all rejects, 0% shares accepted.
Actually this firmware does not work with the most of the pools I use Sad

Well I don't know why it happens, but it would help if you send me the log contents.

Here is a partial log, the rest of the log is just the same -

Code:

[2014-04-13 23:12:3.091] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-04-13 23:12:3.092] 0: open device /dev/ttyACM0
[2014-04-13 23:12:3.093] Starting Stratum on stratum+tcp://fr.hbn.theblocksfactory.com:3336
[2014-04-13 23:12:3.097] 0: Open UART device /dev/ttyACM0
[2014-04-13 23:12:3.179] 0@0: Set GC3355 core frequency to 850Mhz
[2014-04-13 23:12:3.189] 0@1: Set GC3355 core frequency to 850Mhz
..................
..................
[2014-04-13 23:14:22.006] New job_id: 3c4c Diff: 64
[2014-04-13 23:14:22.006] Stratum detected new block
[2014-04-13 23:14:22.008] 7: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.013] 8: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.025] 0: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.028] 3: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.045] 5: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.045] 6: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.046] 4: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.053] 2: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.076] 9: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.083] 10: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.100] 1: Dispatching new work to GC3355 LTC core
[2014-04-13 23:14:23.328] 4@0 850MHz: Got nonce 0000412e, Hash <= Htarget!
[2014-04-13 23:14:23.422] 4: rejected 0/148 (0.00%) 361.1/3829.5 KH/s
[2014-04-13 23:14:23.422] DEBUG: reject reason: 'above_count'
[2014-04-13 23:14:23.625] 4@2 850MHz: Got nonce 6666fa12, Hash <= Htarget!
[2014-04-13 23:14:23.731] 4: rejected 0/149 (0.00%) 361.2/3829.6 KH/s
[2014-04-13 23:14:23.731] DEBUG: reject reason: 'above_count'
[2014-04-13 23:14:23.952] 10@0 850MHz: Got nonce 0000e6a2, Hash <= Htarget!
[2014-04-13 23:14:23.993] 9@1 850MHz: Got nonce 333426c6, Hash <= Htarget!
[2014-04-13 23:14:24.046] 10: rejected 0/150 (0.00%) 360.9/3829.7 KH/s
[2014-04-13 23:14:24.046] DEBUG: reject reason: 'above_count'
[2014-04-13 23:14:24.088] 9: rejected 0/151 (0.00%) 361.7/3829.7 KH/s
[2014-04-13 23:14:24.088] DEBUG: reject reason: 'above_count'

sandor111

hero member

Activity: 616

Merit: 500

Quote from: noise23 on April 13, 2014, 10:38:14 AM

Just installed LAG3355_12-RC10d.bin - it still does not work with many pools.
fr.hbn.theblocksfactory.com:3336 , hbn.stratum.smartmining.net:17373 and many others just give all rejects, 0% shares accepted.
Actually this firmware does not work with the most of the pools I use Sad

Well I don't know why it happens, but it would help if you send me the log contents.

noise23

legendary

Activity: 968

Merit: 1002

Just installed LAG3355_12-RC10d.bin - it still does not work with many pools.
fr.hbn.theblocksfactory.com:3336 , hbn.stratum.smartmining.net:17373 and many others just give all rejects, 0% shares accepted.
Actually this firmware does not work with the most of the pools I use Sad

poopypants

full member

Activity: 134

Merit: 100

Quote from: juve4v on April 12, 2014, 03:14:03 PM

Did any of you try the R52 voltmod described here : http://cryptomining-blog.com/tag/gridseed-voltage-mod/
I'm in between when I have the time.

I've done both mods, the R52 47k resistor on some and the double bridge mod on others. The 47k are averaging around 480-500 khs at 1150, and the double bridge mod at 403khs reliably. The 47k will cost you about 10 more watts with one unit running at about 20 watts, the double bridge is about 11 watts. Later this week I will mod them all with the 47k.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: rammy2k2 on April 12, 2014, 04:40:52 AM

Quote from: Unacceptable on April 12, 2014, 04:33:04 AM

Hey,these gridseeds mine only LTC or just specific altcoins Huh

& do you have to compile or will just a bat file work Huh

Thanks!!

i supose u didnt bothered to read anything abt these miners ; they mine any scrypt and they have their own stand alone miner

I have read ALOT on these miners,but the info has been conflicting....setup guides only mention LTC in most cases & I've seen a lot of different mining software.

Hence why I asked my stupid question Cheesy

Thanks for your answer!! Wink

I have ordered one @ $129 to see how it works,if the price keeps falling & it's as easy to setup as stated....I'll get more Cool

juve4v

hero member

Activity: 505

Merit: 500

Did any of you try the R52 voltmod described here : http://cryptomining-blog.com/tag/gridseed-voltage-mod/
I'm in between when I have the time.

Topic: LightningAsic Gridseed Controller Firmware V3 - page 12. (Read 51104 times)