It looks like 20 miners with the new firmware are running better than 22 miners on bfgminer at the same frequency.
Many thanks to sandor111 for all of his hard work on this.
Many thanks to sandor111 for all of his hard work on this.
Excellent.
Topic: LightningAsic Gridseed Controller Firmware V3 - page 19. (Read 51104 times)
Excellent.
It looks like 20 miners with the new firmware are running better than 22 miners on bfgminer at the same frequency.
Many thanks to sandor111 for all of his hard work on this.
Many thanks to sandor111 for all of his hard work on this.
I tried that. Including using Chrome's incognito mode to arrest any cache issues. Nope. Still the same error message.
I have yet another unit that throws this error when I try to upload the initial binary.
Error: Firmware with name 'LAG3355_upgrade_v2' is not found
Error: Firmware with name 'LAG3355_upgrade_v2' is not found
That's a strange one, but clearing your browser cache should fix that.
I have yet another unit that throws this error when I try to upload the initial binary.
Error: Firmware with name 'LAG3355_upgrade_v2' is not found
Error: Firmware with name 'LAG3355_upgrade_v2' is not found
I still have the same problem with ACM1 and ACM2 not working on the updated firmware.... Can I flash back to V1 safely?
I have the same issue with my updated from V2 (with V1 image) controller. 2 and 3 always report 0.
I had provided sandor with access to my device and he believes he isolated this issue. I expect he'll say something about it today.... looks like he has a fix for it.
I still have the same problem with ACM1 and ACM2 not working on the updated firmware.... Can I flash back to V1 safely?
I have the same issue with my updated from V2 (with V1 image) controller. 2 and 3 always report 0.
Have you tried resetting it with a paperclip? I had some luck when one of my controllers was stuck on a white screen.
I still have the same problem with ACM1 and ACM2 not working on the updated firmware.... Can I flash back to V1 safely?
I have the same issue with my updated from V2 (with V1 image) controller. 2 and 3 always report 0.
Can i flash this firmware in a normal TP-link Router ??
New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
List of changes with the new firmware?
Works with most, if not all other pools.
Confirmed that it is working for me on GHash.IO which did not work with the prior version. I was able to install with no issues.
I've also fine tuned my miners individually with the highest frequency that gave off no HW errors and am now getting ~7.6MH/s with 21 miners. Thought the results might be interesting to some.
1@800
1@832
6@850
1@852
4@862
8@875
That's great to hear.
After update on v3 cant mine BTC in dualmode, no settings in web interface... 
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?lol, this has been discussed... Its been known for weeks that ver3 would discontinue dual mining!~
Yeah, my bad... missing that information
The file it searches for. http://www.megafileupload.com/en/file/505377/LAG3355-12-RC1-bin.html Uploaded it myself a month ago. If it doesn't download, let me know, still have it. (Directly received from Jack)
Thanks!
But have same error - "Firmware with name 'LAG3355_12-RC1' is not found", when i try update with v1 and v2 firmwares have this - "Failed to unpack firmware".
New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
List of changes with the new firmware?
Works with most, if not all other pools.
Confirmed that it is working for me on GHash.IO which did not work with the prior version. I was able to install with no issues.
I've also fine tuned my miners individually with the highest frequency that gave off no HW errors and am now getting ~7.6MH/s with 21 miners. Thought the results might be interesting to some.
EDIT: Had to lower the frequencies a bit after 12 hours of mining to eliminate HW errors. Now getting ~7.2MH/s with 21 miners.
1@775
1@825
1@832
8@850
1@852
5@862
4@875
Indeed, fails to unpack.. 2x V1 units upgraded to V3. I'm expecting my V2 units later this week. Will test those.
Previous V3 only get 2/3 miners hashing, more unstable than V1. I'm still using my PC to mine in between.
Previous V3 only get 2/3 miners hashing, more unstable than V1. I'm still using my PC to mine in between.
That is weird, I just updated them yesterday...don't know why I wouldn't be able to, today. Just tried unplugging the USB hub and power cycling the controllers, still won't work.
New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
List of changes with the new firmware?
Works with most, if not all other pools. Reject rate significantly lowered, effective hashrate should be increased by 10-20kh/s/miner. Memory comsumption is lower, which makes it possible to run up to 50 miners.
Some other speed optimizations have been implemented.
Getting a failed to unpack firmware error on the new bin.
Seems to be hardware related, some have this issue :/
Getting a failed to unpack firmware error on the new bin.
New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
List of changes with the new firmware?
I still have the same problem with ACM1 and ACM2 not working on the updated firmware.... Can I flash back to V1 safely?
Testing out the new update here, http://wafflepoolmonitor.com/index.php?address=12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM.
worker id: 12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM_1 (20 miners on LightningASIC controller v3(b) at 850)
worker id: 12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM (22 miners on a raspberry pi running bfgminer at 850)
Still working on the second controller.
worker id: 12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM_1 (20 miners on LightningASIC controller v3(b) at 850)
worker id: 12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM (22 miners on a raspberry pi running bfgminer at 850)
Still working on the second controller.
Jump to: