New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
That was really quick! I will give this a try right away. thanks,
Topic: LightningAsic Gridseed Controller Firmware V3 - page 20. (Read 51104 times)
That was really quick! I will give this a try right away. thanks,
New firmware : https://www.dropbox.com/s/gnt2hnf9e0fz0aa/LAG3355_12-RC10b.bin
Flash it using the update page.
Flash it using the update page.
Any idea what is happening here:
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
Maybe a hard reset for the miners and TP-link would help. I was getting a similar problem when it would restart every 5 minutes. It went away when I backed off to 850 from 887. You can also try changing the interval for the 'Restart dead miner' setting.
A hard reset was the first thing I did. I'm already running at 850 and the controller is reporting a decent accept rate. Currently it's showing that it's been hashing away just fine for over an hour. Quite a difference from what the above link is showing. The disconnect is concerning. I guess I'll keep doing hard resets and hope one of them solves the issue.
Any idea what is happening here:
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
Maybe a hard reset for the miners and TP-link would help. I was getting a similar problem when it would restart every 5 minutes. It went away when I backed off to 850 from 887. You can also try changing the interval for the 'Restart dead miner' setting.
Any idea what is happening here:
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
http://wafflepoolmonitor.com/index.php?address=18yNxBAY4KcGtvDcbda1e8AUJv2gMYptkh
I've restarted everything a couple times now and as far as the controller is reporting, it seems normal.
After using two controllers for a day with 42 miners, I have concluded that the V3 firmware preforms worse than a raspberry pi with cgminer/bfgminer or a wiibox controller with 2.1.0 firmware OCed to 850. It is convenient to have up to 40 miners on one TP-link, but the high number of stale shares is totally unacceptable. I am going back to five wiibox controllers that can still dual mine and produce a more stable hashrate.
Edit: I have two LightningASIC controllers updated to the V3 firmware that I would happily part with if anyone needs one. Just pm me a fair price and I can ship it out. Escrow is fine of course.
Edit: I have two LightningASIC controllers updated to the V3 firmware that I would happily part with if anyone needs one. Just pm me a fair price and I can ship it out. Escrow is fine of course.
Please wait for the next update, I promise that it will be better and faster.
After using two controllers for a day with 42 miners, I have concluded that the V3 firmware preforms worse than a raspberry pi with cgminer/bfgminer or a wiibox controller with 2.1.0 firmware OCed to 850. It is convenient to have up to 40 miners on one TP-link, but the high number of stale shares is totally unacceptable. I am going back to five wiibox controllers that can still dual mine and produce a more stable hashrate.
Edit: I have two LightningASIC controllers updated to the V3 firmware that I would happily part with if anyone needs one. Just pm me a fair price and I can ship it out. Escrow is fine of course.
Edit: I have two LightningASIC controllers updated to the V3 firmware that I would happily part with if anyone needs one. Just pm me a fair price and I can ship it out. Escrow is fine of course.
ok, got to a windows machine, on chrome... Now when i upload upgrade ver1 it says "md5 error"
Flashed one of them fine, just this one giving my problems
Flashed one of them fine, just this one giving my problems
I had the same problem. you need to delete the upgrade file and redownload it. It can only be used once and then does not work.
I have been able to fix all the issues aforementioned, been testing on Ghash.io and it does the job perfectly now. I have also fixed some performance issues with the miner software, it should be about 10-20 kh/s/miner faster. Also the memory consumption is further reduced, so it is possible to run more than 50 units.
Waiting for Jack to respond so it can be released.
Try the v1 bin image.
Waiting for Jack to respond so it can be released.
Tryied to upgrade my V2 units. (HW V1.6). All I get is this error "Sysupgrade: cat: write error: Broken pipe cat: write error: Broken pipe cat: write error: Broken pipe cat: write error: Broken pipe Invalid image type. Image check 'platform_check_image' failed."
Try the v1 bin image.
Tryied to upgrade my V2 units. (HW V1.6). All I get is this error "Sysupgrade: cat: write error: Broken pipe cat: write error: Broken pipe cat: write error: Broken pipe cat: write error: Broken pipe Invalid image type. Image check 'platform_check_image' failed."
After update on v3 cant mine BTC in dualmode, no settings in web interface... 
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?The file it searches for. http://www.megafileupload.com/en/file/505377/LAG3355-12-RC1-bin.html Uploaded it myself a month ago. If it doesn't download, let me know, still have it. (Directly received from Jack)
after ~20 hours of running, all my controllers are working fine.
Quote
(miners: uptime: 19:46:03, memory usage: 33%, load average: 0.49)
Quote
(miners: uptime: 17:47:35, memory usage: 64%, load average: 0.51)
Quote
(miners: uptime: 18:11:20, memory usage: 63%, load average: 0.35)
nice to hear Rammy... How are the speeds on the poolside? Any difference in the avg hashrate?
speeds are just a bit better, but thats because , so far, miners didnt disappear from panel no more.
i didnt tried more than 850 tho
after ~20 hours of running, all my controllers are working fine.
Quote
(miners: uptime: 19:46:03, memory usage: 33%, load average: 0.49)
Quote
(miners: uptime: 17:47:35, memory usage: 64%, load average: 0.51)
Quote
(miners: uptime: 18:11:20, memory usage: 63%, load average: 0.35)
nice to hear Rammy... How are the speeds on the poolside? Any difference in the avg hashrate?
after ~20 hours of running, all my controllers are working fine.
Quote
(miners: uptime: 19:46:03, memory usage: 33%, load average: 0.49)
Quote
(miners: uptime: 17:47:35, memory usage: 64%, load average: 0.51)
Quote
(miners: uptime: 18:11:20, memory usage: 63%, load average: 0.35)
After update on v3 cant mine BTC in dualmode, no settings in web interface... And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?lol, this has been discussed... Its been known for weeks that ver3 would discontinue dual mining!~
After update on v3 cant mine BTC in dualmode, no settings in web interface... And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
ok, got to a windows machine, on chrome... Now when i upload upgrade ver1 it says "md5 error"
Flashed one of them fine, just this one giving my problems
Flashed one of them fine, just this one giving my problems
I am aware of the issues with some or all miner devices not hashing at all or 100% rejects, I've been able to reproduce the problem so look forward for another firmware update very soon.
Doesn't work for me. My 6MH/s suddenly turned into 0.3MH/s no matter which frequency/pool I use or how many times I restart them. I strongly recommend that people do not upgrade at this time.
Which pool?
I've tried a few different pools now. It doesn't seem to be pool related. Interestingly, if I only have a couple miners plugged into each hub, it seems to work. I'm playing plugging/unplugging games right now to see how many I can get working at once. So far I can't get more than 4 working with a single controller/hub.
It's obviously pool related, we had no problems testing with 40+ units.
What pool works then? Seems odd that I can get full speed out of 4 units, but when I plug in 10 to the hub, I get almost 0. I would think it was power related had they not been running fine for weeks on v1.
Quote
Miner status (hashrate: 8 Kh/s)
(miners: 11/11 uptime: 4:10, memory usage: 65%, load average: 0.41)
(miners: 11/11 uptime: 4:10, memory usage: 65%, load average: 0.41)
Same pool, same controller, same hub, but only 4 miners:
Quote
Miner status (hashrate: 1212 Kh/s)
(miners: 4/4 uptime: 1:50, memory usage: 58%, load average: 0.11)
(miners: 4/4 uptime: 1:50, memory usage: 58%, load average: 0.11)
Please PM me the pool that you are using, so I can further debug what is going on... we have tested with wafflepool, and dogehouse.
Fyi, I have been getting 100% rejects when connecting to Scryptguild.
Has anyone had any luck yet getting this flashed to a fresh wr703n, I know Hashra's raspberry Pi is based on the image used on the controller, but I would really like to play around with one of these, without paying $100 for one
Jump to: