Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 107. (Read 309065 times)
February 19, 2014, 05:55:35 PM
I'd like to know if the people who have received them are seeing the hashrate increase that Jack was claiming, which puts each unit at around 500kh/s rather than 300kh/s? It was my understanding that they would ship with the new firmware. I have seen instructions for updating the firmware on them, but it required pushing a button and I don't believe the new models shipping now have that button.
February 19, 2014, 05:50:36 PM
Wheeeey 
Got my 6mh rig
Thanks Jack!
Got my 6mh rig
Thanks Jack!
WOW! I'm so jealous! I can't wait to get my 3MH....soon....very soon....I hope!
any tips?if yes, i can help to send package at once.
I'll send you a tip if you send my package out at once!! haha
When are you expecting to send the next batch?
Danny
February 19, 2014, 05:27:41 PM
Also can anyone or asiabtc confirm that the units shipped with the old firmware and need to be updated to the new firmware in the first post. If so I'm going to be bummed because the instructions are written for windows and all I have are mac and linux boxes around the house.
I run the miners with the packaged mini controller (like a raspberry pi), this has linux installed in it (you can SSH it)
asiaBTC has a team working on a new firmware for the controllers, basically a new webbased configuration screen in english (the old was the one from GridSeed, which was in chinese).
So you don't need a (mac) desktop to run the USB miners.
But I don't think the new firmware is finished yet?
New firmware will be finished soon.
February 19, 2014, 05:21:40 PM
Also can anyone or asiabtc confirm that the units shipped with the old firmware and need to be updated to the new firmware in the first post. If so I'm going to be bummed because the instructions are written for windows and all I have are mac and linux boxes around the house.
I run the miners with the packaged mini controller (like a raspberry pi), this has linux installed in it (you can SSH it)
asiaBTC has a team working on a new firmware for the controllers, basically a new webbased configuration screen in english (the old was the one from GridSeed, which was in chinese).
So you don't need a (mac) desktop to run the USB miners.
But I don't think the new firmware is finished yet?
February 19, 2014, 05:12:10 PM
Wheeeey
Got my 6mh rig
Thanks Jack!
Got my 6mh rig
Thanks Jack!
Nice. I hope Jack has enough LA6M. My payment is not confirmed. 10 Days now!
February 19, 2014, 05:02:21 PM
Wheeeey
Got my 6mh rig
Thanks Jack!
Got my 6mh rig
Thanks Jack!
WOW! I'm so jealous! I can't wait to get my 3MH....soon....very soon....I hope!
any tips?if yes, i can help to send package at once.
February 19, 2014, 04:57:58 PM
Wheeeey
Got my 6mh rig
Thanks Jack!
Got my 6mh rig
Thanks Jack!
WOW! I'm so jealous! I can't wait to get my 3MH....soon....very soon....I hope!
February 19, 2014, 04:50:59 PM
Wheeeey
Got my 6mh rig
Thanks Jack!
Got my 6mh rig
Thanks Jack!
February 19, 2014, 04:39:50 PM
Also can anyone or asiabtc confirm that the units shipped with the old firmware and need to be updated to the new firmware in the first post. If so I'm going to be bummed because the instructions are written for windows and all I have are mac and linux boxes around the house.
February 19, 2014, 04:33:32 PM
So I received my units during lunch but didn't have time to get them setup before going back to work. If no one else posts pics/power rating by tonight I'll try to get some up.
I do have a question for anyone in the process of setting it up. So looking at what was in the box everything made sense except for the power supply setup. Obviously all the bare wire cables with the circular power jack were for wiring from the power supply to the miners. I expected there to be a cable with bare wires on one side and a power plug on the other to wire into the power outlet to run the power supply but didn't see a cable like that in the box. Basically I saw no way to actually get power to the power supply.
Before I catch my attic on fire (another reason I didn't want to rush the install and then leave) anyone that has a unit care to share how they wired it up. Thanks.
I do have a question for anyone in the process of setting it up. So looking at what was in the box everything made sense except for the power supply setup. Obviously all the bare wire cables with the circular power jack were for wiring from the power supply to the miners. I expected there to be a cable with bare wires on one side and a power plug on the other to wire into the power outlet to run the power supply but didn't see a cable like that in the box. Basically I saw no way to actually get power to the power supply.
Before I catch my attic on fire (another reason I didn't want to rush the install and then leave) anyone that has a unit care to share how they wired it up. Thanks.
February 19, 2014, 04:24:15 PM
i guess everyone is busy unpacking
c'mon guys post some proofs : )
c'mon guys post some proofs : )
+1
$comment++;
February 19, 2014, 04:19:35 PM
DHL just got here
Now I need to figure out how to set this thing up.
if you got problem, we have online support team.Now I need to figure out how to set this thing up.
cool Jack
I downloaded all the PDFs from your first post and the firmware.
If I have a question how do I get a hold of the online support team>?
-j
February 19, 2014, 04:17:16 PM
DHL just got here
Now I need to figure out how to set this thing up.
if you got problem, we have online support team. Now I need to figure out how to set this thing up.
February 19, 2014, 03:51:54 PM
i guess everyone is busy unpacking
c'mon guys post some proofs : )
c'mon guys post some proofs : )
+1
February 19, 2014, 03:47:47 PM
i guess everyone is busy unpacking
c'mon guys post some proofs : )
c'mon guys post some proofs : )
February 19, 2014, 03:08:20 PM
Received confirmation today from Angel or Angela that my bank transfer from Feb. 10th has been verified and they will be shipping shortly.
February 19, 2014, 02:57:29 PM
So I just send a pm to place an order/inquire info ?
yes.
sweet, msg'd the OP directly , hope he has someone else monitoring the account cause he sounds busy
February 19, 2014, 02:47:21 PM
So I just send a pm to place an order/inquire info ?
yes.
February 19, 2014, 02:42:24 PM
So I just send a pm to place an order/inquire info ?
February 19, 2014, 02:34:58 PM
LA1THS Bitcoin miner: 1THS(1000GHS), 950W.
What will be price?
When it will be available?
Is it SHA256 only (no Scrypt option)?
...and please... confirm my LA3M wire payment / estimated shipping made on 10th feb!
What will be price?
When it will be available?
Is it SHA256 only (no Scrypt option)?
...and please... confirm my LA3M wire payment / estimated shipping made on 10th feb!
Yeah its 28nm chips. SHA-256. 6500$
Jump to: