My LA3M came with v2 firmware on controller and if you think v2 is better hear this: Everything above 750 Mhz will result in lower performance.In fact the more you try to clock the lower Mhs output will be .AT 900 MHs all miners are red -stopped working .
From what I read it was not the case with v1.Also on v2 miners restart nevertheless I set them to NEVER restart.
In conclusion:chips are great with high clock potential but controller sucks probably because of hardware limit -needs more ram ?
I will try run them today on my old EeePC ubuntu machine as I saw people getting A LOT better results after ditching this controller no matter if v1 or v2. I don't think the TP link is the best choice as a controller for running 10 or more units even in v7.
Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 69. (Read 309067 times)
March 07, 2014, 06:06:17 AM
March 07, 2014, 05:22:52 AM
If someone can tell me how/if it's possible, I'll rip the firmware off my v2 and upload it. Unless it's a bad translation, it sounds like jack wants to send (or sell) you a new controller with the v2 firmware on it.
Check this thread linked in the guide: https://bitcointalksearch.org/topic/m.5305449
Couldn't find info in that thread but I did find something that may work elsewhere. I'll try to rip my v2 firmware tonight and upload it for the masses.
I tried but I couldn't get the controller into failsafe mode. I tried every which way for both versions of the tplink. not sure if it's possible to remove failsafe mode from the firmware or not.
I was having a hard time as well with V1.6: ended up removing power, wait for it to boot up, after 2 blinks pressing reset. Then it starts to blink faster.
For it to connect, i had to connect TP Link directly to pc and give my pc ip 192.168.1.2, subnet 255.255.255.0. Then after enabling telnet (W8.1) "telnet 192.168.1.1" worked!
March 07, 2014, 05:14:48 AM
If someone can tell me how/if it's possible, I'll rip the firmware off my v2 and upload it. Unless it's a bad translation, it sounds like jack wants to send (or sell) you a new controller with the v2 firmware on it.
Check this thread linked in the guide: https://bitcointalksearch.org/topic/m.5305449
Couldn't find info in that thread but I did find something that may work elsewhere. I'll try to rip my v2 firmware tonight and upload it for the masses.
I tried but I couldn't get the controller into failsafe mode. I tried every which way for both versions of the tplink. not sure if it's possible to remove failsafe mode from the firmware or not.
March 07, 2014, 01:20:59 AM
Hi Jack/asiabtc,
Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?
Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.
Please consider selling the ATX PCIe cables on their own. How much for 20 including shipping?
Also, I will be interested in the 15 Mh/s scrypt ASIC miner. Any idea on the cost? Please put me on the pre-order list.
March 06, 2014, 10:07:56 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shipping will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
+1
+2
+3 jack is a hard worker. We are paying him well but he has met all expectations and delivered!!! Thanks jack!
+4 Jack makes a good aftersales support. Thanks for that, Jack.
+5
although, my version 1 controller (jack's tech logged into it and turned off the 10 min reboot) works better than my version 2 controller.
higher avg hash - both set to 850 MHz
When will we get backup pools?
-j
March 06, 2014, 10:06:29 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shipping will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
+1
+2
+3 jack is a hard worker. We are paying him well but he has met all expectations and delivered!!! Thanks jack!
+4 Jack makes a good aftersales support. Thanks for that, Jack.
March 06, 2014, 09:21:05 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shipping will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
+1
+2
+3 jack is a hard worker. We are paying him well but he has met all expectations and delivered!!! Thanks jack!
+4 Jack makes a good aftersales support. Thanks for that, Jack.
-4 aftersales support. 3 dead miners, ignored my PM's for DHL info, He then gave me his address so I had to pay $200 for shipping the dead ones back to him!
Now he wants the V1 back and send V2, what about sending the V2 and we return the V1 on his dime?
V1 is buggy as all hell, he has no choice but give us V2.
-Bobby
March 06, 2014, 06:54:30 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shippicang will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
for sold out miners, just email me the cable qty when you place new order. i will ship it to u.cable is free.
if you need it, and dont place new order very soon, i will give u free cable. cables are free too. and you need to pay for dhl.
i care about my name, and custom feeling.
March 06, 2014, 06:51:32 PM
Is safe run LTC only mode without fans?
yes.its safe. only when summer time, you need to power on fan. the key is natural tmp.
March 06, 2014, 05:23:16 PM
If someone can tell me how/if it's possible, I'll rip the firmware off my v2 and upload it. Unless it's a bad translation, it sounds like jack wants to send (or sell) you a new controller with the v2 firmware on it.
Check this thread linked in the guide: https://bitcointalksearch.org/topic/m.5305449
Couldn't find info in that thread but I did find something that may work elsewhere. I'll try to rip my v2 firmware tonight and upload it for the masses.
March 06, 2014, 04:59:29 PM
I read something about a 12mh/s scrypt miner in production, any news on this??
its 15mhs,450W, 2u or 4u case. will start pre-order very soon. lead time is date of pre-order closed+4 weeks.price protected, if market price/mhs droped, we will drop the price.ensure the buyer will make clear roi. March 06, 2014, 04:40:35 PM
I read something about a 12mh/s scrypt miner in production, any news on this??
March 06, 2014, 04:12:01 PM
I have the gold units (feb15 batch). For the last 10 days I've been promised an updated, more stable firmware for the controller. Did anyone get a link to download the new firmware yet? My rig is constantly restarting (every 30-60 mins), and if I leave them running for 12 hours or more, sometimes one or even as much as three units go cold (stop hashing, and are not displayed within the web dashboard anymore). The disappearing miners can be activated again by power cycling both units and controller, but it's really annoying.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
looks like there is NOT going to be any update, as far as i talked with Jack, we must send our controllers back to china, and he will send new ones with new firmware back to us.
i repeat, this is what i understood, im not sure 100%
I'm looking for a firmware update on the gridseeds not the controller....
And I agree with the above it sounds like firmware for the controller will be locked and only available if you ship the unit back or buy a new one.
March 06, 2014, 04:10:29 PM
I have the gold units (feb15 batch). For the last 10 days I've been promised an updated, more stable firmware for the controller. Did anyone get a link to download the new firmware yet? My rig is constantly restarting (every 30-60 mins), and if I leave them running for 12 hours or more, sometimes one or even as much as three units go cold (stop hashing, and are not displayed within the web dashboard anymore). The disappearing miners can be activated again by power cycling both units and controller, but it's really annoying.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
looks like there is NOT going to be any update, as far as i talked with Jack, we must send our controllers back to china, and he will send new ones with new firmware back to us.
i repeat, this is what i understood, im not sure 100%
March 06, 2014, 02:28:03 PM
http://s16.postimg.org/4q804o5cx/image.jpg
do not break the balls to do jack to work, you should work on softwere instead. best result with cpuminer fixed
March 06, 2014, 02:01:02 PM
I have the gold units (feb15 batch). For the last 10 days I've been promised an updated, more stable firmware for the controller. Did anyone get a link to download the new firmware yet? My rig is constantly restarting (every 30-60 mins), and if I leave them running for 12 hours or more, sometimes one or even as much as three units go cold (stop hashing, and are not displayed within the web dashboard anymore). The disappearing miners can be activated again by power cycling both units and controller, but it's really annoying.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
So, anyone got the new firmware yet? Would be great if someone could upload it and post a link.
March 06, 2014, 01:54:45 PM
Is safe run LTC only mode without fans?
https://bitcointalksearch.org/topic/guide-gridseed-gc3355-5-chip-setuppowerwindowslinuxrpi-by-unicornhasher-494625
Yes.
March 06, 2014, 01:39:39 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shipping will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
+1
+2
+3 jack is a hard worker. We are paying him well but he has met all expectations and delivered!!! Thanks jack!
+4 Jack makes a good aftersales support. Thanks for that, Jack.
March 06, 2014, 12:20:57 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
He doesn't have to give these out to anyone - not even new customers if he does't want to. When you handed over your money did you know these were even available? Ofc not. If they hadn't been offered to new customers would you even be discussing it? Ofc not. Stop being a big baby, crying about it not being fair. You can make these cables yourself for less than $5 each. Why should he have to spend thousands of dollars sending these out to you big cry babies? The cost of the shipping will be many times more than the cost of the cables themselves.
And about him being two weeks late - look at his BTC address alone ~$600,000 of orders in 4 weeks, and thats not to mention all the people who wired him USD. I'm pretty sure you wouldn't have the faintest idea how to deal with demand like that. Two weeks really isn't that bad when you consider BFL, Hashfast, Cointerra etc etc. KnC were more than a month late. I even saw the first Bitmain customers waiting longer than that, and look at Bitmains reputation now - sun shines out of his ass because he got his shit together after the initial breaking in period.
Jack's been a decent guy so far - he has RMA'd my broken miners, and now he tests each one individually before shipment.
He is replacing broken controllers for free. He is ramping up his back office staff and systems to deal with the demand. He is spending his 'hefty profits' on a web portal with proper tracking. Give the guy a freaking break
Haters gonna hate - aint no stopping that
+1
+2
+3 jack is a hard worker. We are paying him well but he has met all expectations and delivered!!! Thanks jack!
March 06, 2014, 12:19:38 PM
here is new ATX pcie cable. will be add to package for free.LA3M will bundle with 4 pcs.its free.
Are you going to send a set of those to earlier clients too?
Hahahahahaha, you're hilarious. You're making a very hefty profit on a sale. Miss a promised shipping date by 14 days. Ignore all requests about it, and deny any kind of a refund because "the market gave you too many orders".
And now you don't want to send cables that you give away free to new customers to the customers you so dearly screwed. Good work.
I got my order in 2-3 days from www.zoomhash.com. Search for his feedback on ebay and this forum...
...and doesnt come with psu or controler board??
PSU is 20 dollars on amazon and the controller isnt required to run these. Only run them stand-alone.
Jump to: