LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 74.

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: misc2012-de on March 04, 2014, 04:31:35 PM

Quote from: worldlybedouin on March 04, 2014, 04:29:17 PM

Quote from: GodfatherBond on March 04, 2014, 04:24:54 PM

Quote from: surgexvb on March 04, 2014, 04:11:01 PM

So far with the v2 firmware I am experiencing reboots even though I set it to never reboot on dead miners. I only have 7 miners running at 750. I am wondering if it's the usb hub that was supplied, some of the ports don't make the miners light up green when plugged into the usb, while other ports do. I am going to try a different hub and I'll report back.

Maybe better HUB & good USB cables might help?

I'm using the USB hub that was supplied with my miners and running minerd on RasPi works rock solid! 3 days now and no problems...~3400-3500kh, 100watts, and no worries. Tongue

Why don't you post your sdcard Image from your Pi, that would be great!

yea, post your sdcard image

misc2012-de

member

Activity: 105

Merit: 10

Quote from: worldlybedouin on March 04, 2014, 04:29:17 PM

Quote from: GodfatherBond on March 04, 2014, 04:24:54 PM

Quote from: surgexvb on March 04, 2014, 04:11:01 PM

So far with the v2 firmware I am experiencing reboots even though I set it to never reboot on dead miners. I only have 7 miners running at 750. I am wondering if it's the usb hub that was supplied, some of the ports don't make the miners light up green when plugged into the usb, while other ports do. I am going to try a different hub and I'll report back.

Maybe better HUB & good USB cables might help?

I'm using the USB hub that was supplied with my miners and running minerd on RasPi works rock solid! 3 days now and no problems...~3400-3500kh, 100watts, and no worries. Tongue

Why don't you post your sdcard Image from your Pi, that would be great!

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: GodfatherBond on March 04, 2014, 04:24:54 PM

Quote from: surgexvb on March 04, 2014, 04:11:01 PM

So far with the v2 firmware I am experiencing reboots even though I set it to never reboot on dead miners. I only have 7 miners running at 750. I am wondering if it's the usb hub that was supplied, some of the ports don't make the miners light up green when plugged into the usb, while other ports do. I am going to try a different hub and I'll report back.

Maybe better HUB & good USB cables might help?

I'm using the USB hub that was supplied with my miners and running minerd on RasPi works rock solid! 3 days now and no problems...~3400-3500kh, 100watts, and no worries. Tongue

GodfatherBond

sr. member

Activity: 264

Merit: 250

Quote from: surgexvb on March 04, 2014, 04:11:01 PM

So far with the v2 firmware I am experiencing reboots even though I set it to never reboot on dead miners. I only have 7 miners running at 750. I am wondering if it's the usb hub that was supplied, some of the ports don't make the miners light up green when plugged into the usb, while other ports do. I am going to try a different hub and I'll report back.

Maybe better HUB & good USB cables might help?

surgexvb

full member

Activity: 445

Merit: 100

So far with the v2 firmware I am experiencing reboots even though I set it to never reboot on dead miners. I only have 7 miners running at 750. I am wondering if it's the usb hub that was supplied, some of the ports don't make the miners light up green when plugged into the usb, while other ports do. I am going to try a different hub and I'll report back.

velvethammer2

member

Activity: 65

Merit: 10

OK, that is great for my 2nd order but i need to get it on my 1st order

Quote from: TrollboxChamp on March 04, 2014, 01:22:11 AM

Quote from: velvethammer2 on March 03, 2014, 10:01:43 PM

on second la3m order i got an email today with my tracking number.

communication IS getting better !

-thanks Jack.....

now when can we get updated firmware?

New controller will have updated firmware.

I had 1 TP-link not working on arrival so jack is sending me 2 FREE!

He informed me they will have the new firmware.

juve4v

hero member

Activity: 505

Merit: 500

Just got my LA3M. Testing phase begins.

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: OgNasty on March 04, 2014, 02:51:59 AM

Quote from: surgexvb on March 04, 2014, 01:40:19 AM

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

Patiently waiting for some news or a .bin.

+1

Flep182

legendary

Activity: 938

Merit: 1007

Today I got a reponse to all the pm's I've sent to asiabtc.

Yesterday I got the promise that the order would be picked up today so I'm waiting, so far no pickup from DHL yet.

With this customer service and broken promises I don't think it would be weird to ask for a partial refund. Especially with the hefty margins asiabtc is making.

surgexvb

full member

Activity: 445

Merit: 100

Quote from: wasubii on March 04, 2014, 02:34:33 AM

Quote from: surgexvb on March 04, 2014, 01:40:19 AM

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

Pls confirm if V2 firmware allows changing the frequency for each worker individually?

Negative, no individual adjustment. However there is new "Reset Dead Miner" option that you can set the time limit to restart if it hasn't submitted any shares. Or you can set it to "Never".

Hashing so far with 7 miners @ 800 frequency for an hour with no restarts. 3 of my dc power leads were faulty, one just didn't work and the other 2 had detectable resistance between the positive and ground so I didn't use them, the others didn't see any resistance, so I deemed them working.

Not sure why some cables had resistance between the + and - they still worked but I didn't trust. Could be another reason why someone has one or two lazy miners?

mazedk

sr. member

Activity: 457

Merit: 250

Quote from: OgNasty on March 04, 2014, 02:51:59 AM

Quote from: surgexvb on March 04, 2014, 01:40:19 AM

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

Patiently waiting for some news or a .bin.

+1

Again, why isnt jack communicating to the community? - Its beyond me

OgNasty

donator

Activity: 4760

Merit: 4323

Leading Crypto Sports Betting & Casino Platform

Quote from: surgexvb on March 04, 2014, 01:40:19 AM

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

Patiently waiting for some news or a .bin.

wasubii

sr. member

Activity: 448

Merit: 250

Quote from: surgexvb on March 04, 2014, 01:40:19 AM

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

Pls confirm if V2 firmware allows changing the frequency for each worker individually?

surgexvb

full member

Activity: 445

Merit: 100

Just got my la3m setup, I have the controller with the v2 firmware. Will post results.

TrollboxChamp

sr. member

Activity: 462

Merit: 250

Quote from: velvethammer2 on March 03, 2014, 10:01:43 PM

on second la3m order i got an email today with my tracking number.

communication IS getting better !

-thanks Jack.....

now when can we get updated firmware?

New controller will have updated firmware.

I had 1 TP-link not working on arrival so jack is sending me 2 FREE!

He informed me they will have the new firmware.

velvethammer2

member

Activity: 65

Merit: 10

on second la3m order i got an email today with my tracking number.

communication IS getting better !

-thanks Jack.....

now when can we get updated firmware?

bobby35ny

member

Activity: 96

Merit: 10

Jack, You really need a RMA procedure, I need 3 new ones and I know a few guys here that need RMA's too!!!
-Bobby

Samoshi

member

Activity: 81

Merit: 10

Thanks for the fast reply. Nice to know my order is on the way.

Quote from: asiabtc on March 03, 2014, 04:35:08 PM

Quote from: Samoshi on March 03, 2014, 03:30:30 PM

I ordered 2 x LA6M from asiabtc!

I paid on Feb 12, with BTC (Jack confirmed payment received)

I got many "will ship soon" and also "will ship today" but

** still no unit, no tracking, last few days no return of emails ***

Please ship or refund. I'm already waiting for way too long...

dear samoshi,
the package has been shipped out on feb27. pls check the dhl 1889723953.
we should do it better to reply all emails and give tracking no at once. and leak of staff.
very sorry for bring your this trouble.
from this week, everything will be more smoothly . the payment, orders will be trackable.new website will be online. web store will work.
thanks.
Jack.

MZD

full member

Activity: 189

Merit: 100

I can see the mac/ip of the controller in my router but when I type in the ip I cannot connect.

I'm using another router as a wireless bridge. Any ideas what is going on?

rammy2k2

legendary

Activity: 1974

Merit: 1003

Quote from: miaviator on March 03, 2014, 05:32:37 PM

Quote from: rammy2k2 on March 03, 2014, 05:16:58 PM

Quote from: worldlybedouin on March 03, 2014, 04:44:21 PM

@asiabtc/Jack: Any information on the new firmware?

should be ready this week

I read that as three and half weeks from now? Minimum.

u can troll as much as u like, there's room for everybody

Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 74. (Read 309065 times)