Linux mining distro for the Raspberry PI - MinePeon - page 68.

Scorpia

member

Activity: 73

Merit: 10

Quote from: LogicalUnit on September 09, 2013, 11:38:39 PM

Need help: cgminer 3.3.4 on MinePeon 0.2.3a restarts every few hours. Can someone tell me how to look at the log files?

im not sure about the log files sorry but i would suggest you either go back to 0.2.2 or update minepeon via the git site.

off the top of my head you need to

cd /opt/minepeon
git pull

then optionally

cd http
git pull

then reboot

note this will get you the current unfinished interface but most are finding it more stable than the standard setup on 0.2.3 but the webinterface still has some bugs. which is why i said the http stuff is optional.

ps, more info over at http://www.minepeon.com/forums/index.php

LogicalUnit

sr. member

Activity: 299

Merit: 250

Need help: cgminer 3.3.4 on MinePeon 0.2.3a restarts every few hours. Can someone tell me how to look at the log files?

MineForeman.com

legendary

Activity: 896

Merit: 1000

Quote from: chanberg on September 09, 2013, 04:43:24 PM

By chance is there a way to setup a wireless connection before actually connecting to it?

Like a config file, where i pop in the SSID name and password, so when i boot it up somewhere else, it can just automatically connect??

No sorry, there is a lot of SSID stuff going on there, the connection must be made with the wireless working.

Neil

chanberg

hero member

Activity: 672

Merit: 500

By chance is there a way to setup a wireless connection before actually connecting to it?

Like a config file, where i pop in the SSID name and password, so when i boot it up somewhere else, it can just automatically connect??

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: cardcomm on September 09, 2013, 10:50:58 AM

Quote from: tk1337 on September 09, 2013, 08:35:44 AM

Quote from: Its About Sharing on September 09, 2013, 06:43:25 AM

Quote from: tk1337 on September 08, 2013, 09:53:59 AM

Quote from: Its About Sharing on September 08, 2013, 05:29:54 AM

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Right now, my only gripe is a short 'hack' I did for the stop/start commands, which I have a more thought out way of doing it but would require a change within MinePeon (possibly), going to shoot off a message to Neil today.

I see stellan0r mentioned an API running on his Rpi. Is this what you are referring to with the stop/start commands?
I just want to be able to monitor things while I'm away from the house. Does this API do that? (And is it on your website?)

Thanks
It's about sharing

stellan0r is referring to the API within CGMiner that allows MinePeon's WebUI talk to CGMiner (to provide stats, etc...)

stellan0r - The issue you experienced basically means at some point the WebUI wasn't able to communicate to the CGMiner application (for whatever reason), from my experiences, CGMiner will try to restart itself on error within MinePeon (believe that's an option, can't remember atm, I know if I kill the cgminer process it will instantly come back up), with that being said, if the WebUI tried to pull stats from the CGMiner application during a restart (or if CGMiner was down) then it's going to fail communicating to CGMiner on port 4028 (which is the default API port for CGMiner) in the CGMiner configuration it is setup to only allow API requests from the localhost (so don't freak out thinking someone else can connect to it).

Actually, on 0.2.2 I can hit the cgminer API from any box on my local subnet (still plenty secure). I wonder if this changed on the latest release? I'm gonna try and put the latest on my test Pi today.

I can't remember the setting exactly, but I don't believe it's being explicitly set to 127.0.0.1 - Plus I haven't read the CGMiner API documents full, but I know from what I did read you can set the range, if you wanted to limit it to certain ip ranges on your local subnet.

KyrosKrane

sr. member

Activity: 295

Merit: 250

Quote from: m3sSh3aD on September 09, 2013, 10:58:53 AM

My install keeps getting stuck at

[ok] reached target graphical interface

Any ideas why it stops loading here?

Thanks in advance

It's not stuck, it's waiting for you to log in. Just type "minepeon" without the quotes, hit enter, then type your password.

The reason this happens is that the login prompt appears earlier in the process, but background processes continue to run and print output to the screen. So, unless you're watching carefully, you don't realize it's waiting for you. This only happens when you're using a screen and keyboard; you don't see this problem if you SSH in.

m3sSh3aD

sr. member

Activity: 322

Merit: 250

My install keeps getting stuck at

[ok] reached target graphical interface

Any ideas why it stops loading here?

Thanks in advance

cardcomm

sr. member

Activity: 294

Merit: 250

Quote from: tk1337 on September 09, 2013, 08:35:44 AM

Quote from: Its About Sharing on September 09, 2013, 06:43:25 AM

Quote from: tk1337 on September 08, 2013, 09:53:59 AM

Quote from: Its About Sharing on September 08, 2013, 05:29:54 AM

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Right now, my only gripe is a short 'hack' I did for the stop/start commands, which I have a more thought out way of doing it but would require a change within MinePeon (possibly), going to shoot off a message to Neil today.

I see stellan0r mentioned an API running on his Rpi. Is this what you are referring to with the stop/start commands?
I just want to be able to monitor things while I'm away from the house. Does this API do that? (And is it on your website?)

Thanks
It's about sharing

stellan0r is referring to the API within CGMiner that allows MinePeon's WebUI talk to CGMiner (to provide stats, etc...)

stellan0r - The issue you experienced basically means at some point the WebUI wasn't able to communicate to the CGMiner application (for whatever reason), from my experiences, CGMiner will try to restart itself on error within MinePeon (believe that's an option, can't remember atm, I know if I kill the cgminer process it will instantly come back up), with that being said, if the WebUI tried to pull stats from the CGMiner application during a restart (or if CGMiner was down) then it's going to fail communicating to CGMiner on port 4028 (which is the default API port for CGMiner) in the CGMiner configuration it is setup to only allow API requests from the localhost (so don't freak out thinking someone else can connect to it).

Actually, on 0.2.2 I can hit the cgminer API from any box on my local subnet (still plenty secure). I wonder if this changed on the latest release? I'm gonna try and put the latest on my test Pi today.

stellan0r

hero member

Activity: 574

Merit: 500

Medical Translations for Bitcoins

Quote from: tk1337 on September 09, 2013, 08:35:44 AM

(so don't freak out thinking someone else can connect to it).

thanks, you can read my mind Wink

(dirty b*st*rd Grin

)

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: Its About Sharing on September 09, 2013, 06:43:25 AM

Quote from: tk1337 on September 08, 2013, 09:53:59 AM

Quote from: Its About Sharing on September 08, 2013, 05:29:54 AM

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Right now, my only gripe is a short 'hack' I did for the stop/start commands, which I have a more thought out way of doing it but would require a change within MinePeon (possibly), going to shoot off a message to Neil today.

I see stellan0r mentioned an API running on his Rpi. Is this what you are referring to with the stop/start commands?
I just want to be able to monitor things while I'm away from the house. Does this API do that? (And is it on your website?)

Thanks
It's about sharing

stellan0r is referring to the API within CGMiner that allows MinePeon's WebUI talk to CGMiner (to provide stats, etc...)

stellan0r - The issue you experienced basically means at some point the WebUI wasn't able to communicate to the CGMiner application (for whatever reason), from my experiences, CGMiner will try to restart itself on error within MinePeon (believe that's an option, can't remember atm, I know if I kill the cgminer process it will instantly come back up), with that being said, if the WebUI tried to pull stats from the CGMiner application during a restart (or if CGMiner was down) then it's going to fail communicating to CGMiner on port 4028 (which is the default API port for CGMiner) in the CGMiner configuration it is setup to only allow API requests from the localhost (so don't freak out thinking someone else can connect to it).

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Quote from: tk1337 on September 08, 2013, 09:53:59 AM

Quote from: Its About Sharing on September 08, 2013, 05:29:54 AM

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Right now, my only gripe is a short 'hack' I did for the stop/start commands, which I have a more thought out way of doing it but would require a change within MinePeon (possibly), going to shoot off a message to Neil today.

I see stellan0r mentioned an API running on his Rpi. Is this what you are referring to with the stop/start commands?
I just want to be able to monitor things while I'm away from the house. Does this API do that? (And is it on your website?)

Thanks
It's about sharing

stellan0r

hero member

Activity: 574

Merit: 500

Medical Translations for Bitcoins

I just SSH'd into my RPi and this was in the console after sudo screen:

"API running in IP access mode on port 4028 (19)"

- the timestamp says this was like 6.5 hours ago.

cgminer is working, no interruptions according to my pool stats.

Does anyone know what that means?

(ah and btw, i'm still on minepeon 0.2.2 without any upgrades; uptime 12:45:35 up 30 days, 11:45)

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: cardcomm on September 08, 2013, 12:37:11 PM

Quote from: tk1337 on September 08, 2013, 01:58:08 AM

Quote from: Polyatomic on September 08, 2013, 01:56:23 AM

iOS 7 too aye.

and I almost didn't renew my iOS developer subscription this year.

LOL! Good thing you did. Looks like nice work.

The iOS (& android & winMobile) applications are MobileMinerApp (http://www.mobileminerapp.com), I just wrote the code within the MinePeon UI to connect to the MobileMinerApp API.

I renewed iOS because I was debating on writing a few mobile apps (back in Jan) and haven't gotten around to a single one, been to busy at work.

cardcomm

sr. member

Activity: 294

Merit: 250

Quote from: tk1337 on September 08, 2013, 01:58:08 AM

Quote from: Polyatomic on September 08, 2013, 01:56:23 AM

iOS 7 too aye.

and I almost didn't renew my iOS developer subscription this year.

LOL! Good thing you did. Looks like nice work.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: tk1337 on September 08, 2013, 09:56:55 AM

Quote from: ct1aic on September 08, 2013, 03:52:12 AM

This is great! Congratulations, tk1337. I already installed it in my Galaxy S3 Android Gizmo and already registered it. What do I need now to do to my 3 Rπ's with MinePeon?

Going to chat with Neil, try to get it in the next release, plus I want to see if I can get some information from him about other USB devices people are connecting to the rPi from within MinePeon. I'll let everyone know soon.

Thanks again, tk1337.

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: ct1aic on September 08, 2013, 03:52:12 AM

This is great! Congratulations, tk1337. I already installed it in my Galaxy S3 Android Gizmo and already registered it. What do I need now to do to my 3 Rπ's with MinePeon?

Going to chat with Neil, try to get it in the next release, plus I want to see if I can get some information from him about other USB devices people are connecting to the rPi from within MinePeon. I'll let everyone know soon.

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: Its About Sharing on September 08, 2013, 05:29:54 AM

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Right now, my only gripe is a short 'hack' I did for the stop/start commands, which I have a more thought out way of doing it but would require a change within MinePeon (possibly), going to shoot off a message to Neil today.

RicRock

sr. member

Activity: 290

Merit: 250

Quote from: Its About Sharing on September 08, 2013, 08:09:43 AM

2 Questions please -

- I am setting up the pools on a new Raspberry Pi and wonder about the donation pools. If I have two pools, does the 2nd one need to be the donation one or is your script looking for the word "donation" or the like?

If donation is set... a different config file will be reloaded ~ 1pm EST and run for however long you donate for.

Quote from: Its About Sharing on September 08, 2013, 08:09:43 AM

- Also, I went to the settings page (v. 2.3.a) and adjusted the time. I put in my password again below that and then from that point on, I was locked out of the GUI. I mean, every time I put in the user name and password it popped up again as if the info was wrong. From the command line I reset the GUI password (sudo htpasswd -c /opt/minepeon/etc/password minepeon) but it didn't help. I just re-burned the image and it works again. So, I then reset the time and left the password blank and that seems to do the trick. Of note, the GUI time is now correct but the time (via the date command) is off from the command line by 1hr??? (This is on both of my Rpi's, the other one is an older version of MinePeon)

Thanks,
IAS

The GUI password file is /opt/minepeon/etc/uipassword

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

2 Questions please -

- I am setting up the pools on a new Raspberry Pi and wonder about the donation pools. If I have two pools, does the 2nd one need to be the donation one or is your script looking for the word "donation" or the like?

- Also, I went to the settings page (v. 2.3.a) and adjusted the time. I put in my password again below that and then from that point on, I was locked out of the GUI. I mean, every time I put in the user name and password it popped up again as if the info was wrong. From the command line I reset the GUI password (sudo htpasswd -c /opt/minepeon/etc/password minepeon) but it didn't help. I just re-burned the image and it works again. So, I then reset the time and left the password blank and that seems to do the trick. Of note, the GUI time is now correct but the time (via the date command) is off from the command line by 1hr??? (This is on both of my Rpi's, the other one is an older version of MinePeon)

Thanks,
IAS

Its About Sharing

legendary

Activity: 1442

Merit: 1000

Antifragile

Quote from: tk1337 on September 08, 2013, 01:39:03 AM

Just thought I'd share this over here as well...

I just finished a little addition for MinePeon, which is integration with MobileMinerApp (including remote Start,Stop,Restart from within the app)... I haven't pushed it to github yet (still need to talk with Neil (MineForeman.com)), like wise I'm still playing with a few other things on MinePeon.

There is a script running in the background that updates MobileMinerApp with stats & checks for incoming commands, currently every minute. There will be a configuration to allow you to turn the checking down to every 30 seconds (minimum).

Anyhow, here's some iOS screenshots...

Pretty nice.
I installed it on my Ipad but it looks like there is nothing to connect it with CGMiner on Minepeon?
Any ideas on a date?

Thanks,
IAS

Topic: Linux mining distro for the Raspberry PI - MinePeon - page 68. (Read 685140 times)