Topic: Linux mining distro for the Raspberry PI - MinePeon - page 84. (Read 685140 times)

Note to Self : Do not do updates with 22 miners running. I believe this is the source of the problems I have had.

Disconnect miners, update, reboot, restart mining.

Seems sooo obvious now lol@me.

This might not be a problem with fewer miners.

Am gonna start again with this n mind tomorrow.  

Chances are you can solve it with this:
http://minepeon.com/index.php/Troubleshooting#Set_permissions_after_git_pull

Minepeon will not update anything on the settings page - am stuck in Africa killing kittens

I'm still running the original minepeon 0.2.2 release and I just got the little LCD display.

Should I follow the tutorial (https://github.com/cardcomm/cgminerLCDStats/blob/master/MinePeon%20Install.md) now (including "sudo pacman -Syu" and all the other updates) or is the next minepeon release imminent and I should wait a day or two?

When I do the minepeon update as in the tutorial, will it keep all my settings (miner, changed passwords, wifi etc.)?

cgminer version 3.3.4 - Started: [2013-08-17 07:14:03]
--------------------------------------------------------------------------------
 (5s):3.763G (avg):4.019Gh/s | A:4872  R:96  HW:58  WU:55.8/m
 ST: 3  SS: 29  NB: 10  LW: 10805  GF: 3  RF: 0
 Connected to stratum.50btc.com diff 16 with stratum as user [email protected]_Ras
 Block: 0053adb1ed5465e3...  Diff:50.8M  Started: [08:40:40]  Best share: 9.47K
--------------------------------------------------------------------------------
 (P)ool management (S)ettings (D)isplay options (Q)uit
 AMU  0:                | 335.1M/335.4Mh/s | A:353 R: 0 HW:4 WU:  5.1/m
 AMU  1:                | 335.4M/334.5Mh/s | A:340 R:16 HW:1 WU:  4.5/m
 AMU  2:                | 335.6M/335.2Mh/s | A:356 R: 0 HW:5 WU:  4.6/m
 AMU  3:                | 335.6M/336.4Mh/s | A:403 R: 0 HW:6 WU:  4.6/m
 AMU  4:                | 335.6M/334.6Mh/s | A:260 R: 0 HW:5 WU:  4.6/m
 AMU  5:                | 335.8M/334.7Mh/s | A:516 R: 0 HW:9 WU:  4.8/m
 AMU  6:                | 335.3M/335.3Mh/s | A:484 R: 0 HW:4 WU:  4.6/m
 AMU  7:                | 335.6M/335.5Mh/s | A:531 R: 0 HW:5 WU:  4.5/m
 AMU  8:                | 335.7M/335.0Mh/s | A:436 R:32 HW:4 WU:  4.3/m
 AMU  9:                | 335.6M/335.1Mh/s | A:435 R: 0 HW:7 WU:  4.7/m
 AMU 10:                | 335.6M/334.4Mh/s | A:307 R:48 HW:2 WU:  4.7/m
 AMU 11:                | 334.8M/334.6Mh/s | A:451 R: 0 HW:6 WU:  5.0/m
--------------------------------------------------------------------------------

 [2013-08-17 08:42:56] Accepted 098195c3 Diff 26/16 AMU 10 pool 3
 [2013-08-17 08:43:26] Accepted 0750c5ad Diff 34/16 AMU 7 pool 3
 [2013-08-17 08:47:58] Stratum connection to pool 3 interrupted
 [2013-08-17 08:47:58] Lost 18 shares due to stratum disconnect on pool 3
 [2013-08-17 08:48:00] Pool 3 difficulty changed to 16
 [2013-08-17 08:48:15] Accepted 057f9973 Diff 46/16 AMU 9 pool 3
 [2013-08-17 08:48:28] Accepted 05b52035 Diff 44/16 AMU 1 pool 3
 [2013-08-17 08:48:53] Accepted 0d53df0d Diff 19/16 AMU 0 pool 3
 [2013-08-17 08:48:55] Accepted 0903c153 Diff 28/16 AMU 7 pool 3
 [2013-08-17 08:49:05] Accepted 041c8188 Diff 62/16 AMU 5 pool 3
 [2013-08-17 08:49:45] Accepted 0279be74 Diff 103/16 AMU 7 pool 3

It's @ 16 after a restart of cgminer.

Have you tried testing with a higher difficulty ?. 32 should be ok. I can't remember if 50btc lower the fee for using a higher diff ?. Excellent work BTW on your display.

I pushed a few updates for the LCD display code to github. The current version hopefully fixes a bug where the incorrect pool URL was sometimes displayed. (Kano: I didn't code this exactly the way we discussed, but I think it's working.) I also updated the URL display code itself. If anyone notices an incorrect or scrambled URL, let me know Note that the full pool URL will not be displayed.

Updated photo of the current display layout:



Thanks for the support and feedback, y'all.

cgminer version 3.3.4 - Started: [2013-08-16 20:57:11]
--------------------------------------------------------------------------------
 (5s):3.868G (avg):4.029Gh/s | A:32676  R:19  HW:336  WU:56.2/m
 ST: 3  SS: 3  NB: 82  LW: 70494  GF: 0  RF: 0
 Connected to stratum.50btc.com diff 1 with stratum as user [email protected]_Rasp
 Block: 00484e60f99a48e9...  Diff:50.8M  Started: [06:30:37]  Best share: 37.1K
--------------------------------------------------------------------------------
(P)ool management (S)ettings (D)isplay options (Q)uit
 AMU  0:                | 267.8M/335.9Mh/s | A:2703 R:2 HW:33 WU:  4.7/m
 AMU  1:                | 335.1M/335.8Mh/s | A:2678 R:2 HW:31 WU:  4.6/m
 AMU  2:                | 334.9M/335.7Mh/s | A:2692 R:0 HW:20 WU:  4.6/m
 AMU  3:                | 352.9M/336.0Mh/s | A:2682 R:2 HW:29 WU:  4.6/m
 AMU  4:                | 335.0M/335.6Mh/s | A:2838 R:6 HW:36 WU:  4.9/m
 AMU  5:                | 302.9M/335.9Mh/s | A:2795 R:1 HW:26 WU:  4.8/m
 AMU  6:                | 335.3M/335.7Mh/s | A:2725 R:1 HW:39 WU:  4.7/m
 AMU  7:                | 274.8M/335.8Mh/s | A:2717 R:2 HW:24 WU:  4.7/m
 AMU  8:                | 335.7M/335.6Mh/s | A:2684 R:2 HW:14 WU:  4.6/m
 AMU  9:                | 335.4M/335.7Mh/s | A:2708 R:0 HW:24 WU:  4.6/m
 AMU 10:                | 334.3M/336.1Mh/s | A:2636 R:1 HW:33 WU:  4.5/m
 AMU 11:                | 334.3M/335.7Mh/s | A:2818 R:0 HW:27 WU:  4.8/m
--------------------------------------------------------------------------------

 [2013-08-17 06:44:35] Accepted 0d37f645 Diff 19/1 AMU 5 pool 0
 [2013-08-17 06:44:36] Accepted 9cb24b57 Diff 1/1 AMU 6 pool 0
 [2013-08-17 06:44:36] Accepted 85b1c26b Diff 1/1 AMU 2 pool 0
 [2013-08-17 06:44:37] Accepted d8b21edc Diff 1/1 AMU 1 pool 0
 [2013-08-17 06:44:39] Accepted a16a3561 Diff 1/1 AMU 7 pool 0
 [2013-08-17 06:44:40] Accepted e9a1c42d Diff 1/1 AMU 6 pool 0
 [2013-08-17 06:44:43] Accepted bdbea617 Diff 1/1 AMU 11 pool 0

Very cool tip. I'll add that to the tutorial

Thanks for the positive comments

This issue has been "kind of" addressed in the latest version of the code. I'm attempting to do some "intelligent" truncating of the URL line by removing certain pieces I think are never useful for display. For example, I'm stripping out "stratum.", so with the new code you will probably see something like "mining.el". I'll change the code to also strip out "mining." which should fix the issue in your case.

Without knowing a lot of pool URLs, it's hard to know what to strip out. Any suggestions on URL segments to always remove? I think the current list is "stratum.", "www.", ".com", and now "mining.".

I would like a change to the pool details if possible, all I see is stratum+tc if this line could be expanded or could be adjusted in the script to be user defined
e.g. stratum+tcp://stratum.mining.eligius.st:3334 then output = Eligius   
This would be most helpful..
I love the work your putting into this.
I've now received my second PI so can play more once I have spare time. Have sort of been holding back for Neil to release the 0.2.3 though.
 

I get his error when i run

Make sure we have all the latest MinePeon packages:
cd /opt/minepeon/
git pull


error: Your local changes to the following files would be overwritten by merge:
        etc/miner.conf.donate
Please, commit your changes or stash them before you can merge.

As cardcomm mentioned in this thread
https://github.com/cardcomm/cgminerLCDStats/blob/master/MinePeon%20Install.md