Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 68. (Read 155862 times)

OK I discover the command "gethelp". This command generates a log file.

I studied the log file and I have discovered that all the config file of ethos is used to generate this command:

# cat /tmp/minercmd

============================================================================

su - ethos -c "/usr/bin/screen -c /opt/ethos/etc/screenrc.lolminer -l -L -dmS lolminer /opt/miners/lolminer/lolMiner -profile=ETHOS -usercfg=/var/run/ethos/lolminer_config.json --coin BEAM "

============================================================================

I also checked the lolminer_config.json file. It is this one below:
______________________________-

{
    "DEFAULTS": {
        "DEVICES": "AMD",
        "APIPORT": 42079
    },
    "ETHOS": {
        "COIN": "ZER",
        "POOLS": [
            {
                "POOL": "beam-eu.leafpool.com",
                "PORT": "3333",
                "USER": "MY_ADDRESS.733d0f",
                "PASS": "x"
            }
        ]
    }
}

________________________________

It looks like the problem is created by "-profile=ETHOS" in the miner command line above.

I hope this helps you to help me guys. Sorry for me being a such a monkey.

If you put 2 screenshot of you actually load file and the  error execution will help a lot to find the problem. Because it seems a config problem in the launch file

This is what I get from the miner:

Error: Your input to --pool "rofile=ETHOS" can not be split into a address and a port. Please use format :.

In my file it is not splitted...I don't get the error to be honest.

You will need to set the flags for lol mine (command line options)

lolminer=flags —beam

i put this after the globalminer lolminer line
anything you need to set by command line option goes on the lolminer=flags (no spaces for that first part).

Hello guys,

I am having issues with lolminer setup in ethos. Below my configuration file:

maxgputemp 85
stratumproxy miner
#BEAM
proxywallet my_adress.733d0f
proxypool1 beam-eu.leafpool.com:3333
flags --cl-global-work 8192 --farm-recheck 200
fan 733d0f 25 35 30 45 35 28
globalminer lolminer
safevolt disabled
cor 733d0f 1150 1150 1150 1150 1150 1150
mem 733d0f 2150 2050 2050 2050 2050 2050
vlt 733d0f 900 850 850 850 850 850

Miner loads properly, it connects to the pool but it disconnect immediately after. Any suggest?

Claymore and Phoenix are know to "inflate" their hashrate. Also with Claymore you will not be able to mine very soon ETH, and now you are not able to mine ETC for example.

At the end you should try to see Shares at the pool... you are payed for Shares at the pool always. With Phoenix is true that you will see a higher hashrate at the client, but this is not the real hashrate. You should check the shares you send to the pool. When you make this test, you will see that the shares are lower with PhoenixMiner. Why?.

1- Highrate is nearly 3 inflated with Phoenixminer
2- DevFee, with Phoeneix you are loosing lot more time in the DevFee, because he generated another time the DAG. In a 1070 that is nearly 10s, each time he makes the Fee + Fee + Regenerate new DAG to continue mining.

At the end this is a high time less mining. So Shares at the pool are lower at the end with Claymore or PhoenixMiner

Decided to try out this miner since DAG #381 no longer worked with phoenixMiner. Was pretty easy to set up however I am wondering if it has some features such as Claymore and Phoenix.

One featured I liked was the -ttli, where it throttles a GPU if it goes over a certain temperature. If it doesn't have this is there a way to reduce the intensity of a GPU?

Another question is why it uses more power than Phoenix/Claymore using the same voltage and clocks? My rig used 700 Watts and now it uses 800 Watts.

And with that epoch change, a flood of users are dumped from Claymore into lolminer.  And a series of "I used to over there", so "how do I over here?"

Unfortunately, I'm in this boat as well.  It took a little while to tweak my AMD RX570's with Claymore and I was getting approx. 32-34.
I am happily surprised that out of the box, lolminer starts up and I'm getting 21.5.  But, like many others, I'd like to get it back to where I was.

So from what I'm gathering in the past few pages.

- we don't have the timing features we did in Claymore.  So clock speeds and rxboost don't exist. But there seemed a little chatter that a new version could include this?
- settings for fanmin (90) and fanmax (100) also don't seem to exist?
- no need for strap?

I have AMD Afterburner installed still. Should I retry this?  I know it was a little crazy doing trial and error originally.  (blew a few breakers).  But is it worth to go back to this and set the clock, fan and power settings the same in this app as I did in Claymore?

JGONZI - "you mentioned if you don't know how ask"  but the idea of modding the BIOS does scare me.  Not sure I want to do that just yet.

But the last thing to mention is; is lolminer reporting a smaller hash?  I do notice on my miner (running Win10 + lolminer 1.16) indicates approx 21.6mh/s.  But then I go over to ethminer.org and it's reporting 27.4mh/s

And it looks like I can update my video drivers from 20.4.1 to 20.11.3.

[Update]
Can't say that Afterburner did anything.  In fact out of two rigs; one is now at 21 and the other says 19?
I set Afterburner (based off my Claymore settings of the same);
PowerLimit = -10
Temp Limit = 90
CoreClock = 1200
MemClock = 2150
Fan Speed = 90
No real change is seen.  It still seems to stay consistent.  Even after rebooting one of them.