Pages:
Author

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 71. (Read 155862 times)

member
Activity: 639
Merit: 19
I forgot the most important, yes I mine eth. Do you think I should start mining something else?
Thanks

You should make your analysis... with ETH you will continue loosing Mhs each new EPOCH, but you are able to mine thanks to the lolMiner Zombie mode.... If you jump to ETChash you will recover all your Mhs.

You should analize ETH (Zombie Mode ) vs ETCHash (Normal Mhs) or of course anyother of the Ethash coins (ETHO, EGEM, ELLA, ...)

member
Activity: 1558
Merit: 69
how can i know the manufacturer of the memories of my sapphire rx480?
I not know if is Hynix, samsung, micron or other.

GPU-Z

RX 570 and 580  4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer.  Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate?
Thanks

what are you mining? ETC, ETH, PIRL or what.
I think you mine ETH and for this 22,3mh are normal, because 4gb are not enough for the DAG file.

You can mine ETC (new algo EtcHash)
newbie
Activity: 17
Merit: 0
I forgot the most important, yes I mine eth. Do you think I should start mining something else?
Thanks
member
Activity: 1558
Merit: 69
RX 570 and 580  4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer.  Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate?
Thanks

what are you mining? ETC, ETH, PIRL or what.
I think you mine ETH and for this 22,3mh are normal, because 4gb are not enough for the DAG file.
newbie
Activity: 17
Merit: 0
RX 570 and 580  4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer.  Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate?
Thanks
member
Activity: 1558
Merit: 69
AMD 380 and 380x not supported on etchash? I get "problem in building kernel" and miner close. Tested driver versions 20.2.2 and 18.6.1
member
Activity: 194
Merit: 10
On page 1 it says support:
Beam Hash III   3G / 4G

I'm trying with a AMD HD7970 card it gives me the following error:
Setup Miner...
Device 0:
    Name:    AMD Radeon R9 200 / HD 7900 Series
    Address: 2:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  3072 MByte (3022 MByte free)
    Active:  false (Unsupported device or driver version.)

Connecting to pool...
Connected to beam-us.leafpool.com:3333  (TLS enabled)
TLS Handshake success

Am I doing something wrong?
Same problem( win 8.1. and win 10 - different drivers)
and in ETCHASH only 10mh per card
newbie
Activity: 24
Merit: 0
My operating system:
Win 10 x64
GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQ
video driver: Adrenalin 2020 ver. 20.4.2
Miner: lolMiner 1.6

without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH.
All right for this GPU? Or can I do something to get better performance?



Compute mode on?
newbie
Activity: 4
Merit: 0
On page 1 it says support:
Beam Hash III   3G / 4G

I'm trying with a AMD HD7970 card it gives me the following error:
Setup Miner...
Device 0:
    Name:    AMD Radeon R9 200 / HD 7900 Series
    Address: 2:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  3072 MByte (3022 MByte free)
    Active:  false (Unsupported device or driver version.)

Connecting to pool...
Connected to beam-us.leafpool.com:3333  (TLS enabled)
TLS Handshake success

Am I doing something wrong?
newbie
Activity: 8
Merit: 0
My operating system:
Win 10 x64
GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQ
video driver: Adrenalin 2020 ver. 20.4.2
Miner: lolMiner 1.6

without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH.
All right for this GPU? Or can I do something to get better performance?



1-changes straps to increase performance
http://polaris-bios-editor.eu/

2-Flash card
https://www.techpowerup.com/download/ati-atiflash/

look it up on youtube before doing it it could be tricky and scary the first time you do it

also make sure you are on compute mode...

GL
newbie
Activity: 11
Merit: 0
My operating system:
Win 10 x64
GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQ
video driver: Adrenalin 2020 ver. 20.4.2
Miner: lolMiner 1.6

without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH.
All right for this GPU? Or can I do something to get better performance?

sr. member
Activity: 1484
Merit: 253
how can i know the manufacturer of the memories of my sapphire rx480?
I not know if is Hynix, samsung, micron or other.
GPU-Z
newbie
Activity: 11
Merit: 0
how can i know the manufacturer of the memories of my sapphire rx480?
I not know if is Hynix, samsung, micron or other.
member
Activity: 639
Merit: 19
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?

+1

yes similar to claymore example ... -tt 68 -ttli 85 -tstop 95

I suppose he will have a look on that... it is an interesting control
newbie
Activity: 16
Merit: 0
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?

+1

yes similar to claymore example ... -tt 68 -ttli 85 -tstop 95

Hmm... I tried and it didn't work. I'll give it another shot.

Did those arguments work for you?

No but I was simply stating that YES it would be nice to have something similar to what Claymore had as far as temperature settings...

Oh, sry... I misunderstood. :^)

Yes, I agree. Still a great miner and love the work that's put into it.

Great work!
newbie
Activity: 8
Merit: 0
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?

+1

yes similar to claymore example ... -tt 68 -ttli 85 -tstop 95

Hmm... I tried and it didn't work. I'll give it another shot.

Did those arguments work for you?

No but I was simply stating that YES it would be nice to have something similar to what Claymore had as far as temperature settings...
newbie
Activity: 16
Merit: 0
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?

+1

yes similar to claymore example ... -tt 68 -ttli 85 -tstop 95

Hmm... I tried and it didn't work. I'll give it another shot.

Did those arguments work for you?
newbie
Activity: 8
Merit: 0
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?

+1

yes similar to claymore example ... -tt 68 -ttli 85 -tstop 95
newbie
Activity: 16
Merit: 0
Are there options to allow for fan control and also any to limit mining intensity when a set temp is reached?
newbie
Activity: 28
Merit: 0
Can you put a screenshot or the GPUZ Information to see if that could help to find the problem


Thank you for your willingness to help. I've already solved my problem.
Pages:
Jump to: