lolMiner 1.64: Fastest Kaspa miner in market - page 87.

S.KOLB1992

newbie

Activity: 1

Merit: 0

Quote from: birdjan on February 10, 2020, 08:52:36 AM

Is this Windows 10? Because the 0.9.4 code changes increased the memory demand a bit ... could be that this causes the problem :/

yes, it is windows 10,thank you for your answer.best regards from serbia.any way good work,keep it that way

Please tell me how to solve this problem. I have a 6xvega 64 8GB.
OpenCL init failure: invalid kernel name. Huh

JeffJohnsonTheNameYouKnow

jr. member

Activity: 41

Merit: 2

Running C31 on Vega 56 I sometimes get 0 hashing or "stuck device detected, invoking emergency script"

I can then stop script and switch to c29 and no issues.

Metsli

newbie

Activity: 1

Merit: 0

I have problem with card AMD too

lolminer 0.9.7
Miner card #0 is not working... Working 10-15 minute and fall
I have 4 cards AMD RX588 hynix memory (PowerColor Red Dragon), win10 x64 and 1.9.1.2 drivers (but i have this problem 1.8.6.1 too)
GRIN-C32 hashing with 0.6 g/s on NiceHash

nicog5

newbie

Activity: 64

Merit: 0

Hello. I'm trying to mine wmc coin with lolminer 0.9.7 on frostypool.com with 6x RX480 ethereum custom bios.
five cards are working perfect and are hashing with 0.6 g/s but the first card (in miner card #0) is not working. It is not hashing and the hashrate is 0.00. I tried to disconnect all other cards and lived in the miner only the first card but it's hashrate is still 0

Can anyone please help me to solve this problem?
The first card is AMD RX480 8GB Sapphire Nitro+ with Samsung memory. The system is windows 10 and amd blockchain driver.

sea_of_blocks

newbie

Activity: 16

Merit: 0

Quote from: sea_of_blocks on January 29, 2020, 04:26:01 PM

Quote from: Lolliedieb on January 29, 2020, 03:18:43 PM

Well yes / no.
You can try to put in the command for killing the current instance and to restart it into the .bat, the question is if it will work. That depends on why exactly the card had crashed. In case of an algorithm problem it will work what you described, in case it did dead lock due to too high clock for your set voltage its very likely that the system will need a complete reboot - so it depends a bit on what had happened.

Thanks again for all your work! What's the command to kill/restart?

Any help is appreciated!

birdjan

newbie

Activity: 29

Merit: 0

Is this Windows 10? Because the 0.9.4 code changes increased the memory demand a bit ... could be that this causes the problem :/

yes, it is windows 10,thank you for your answer.best regards from serbia.any way good work,keep it that way

N2DCRYPT

jr. member

Activity: 148

Merit: 5

Quote from: Lolliedieb on February 09, 2020, 11:30:42 AM

In which version does this happen? Latest should work, but would like to test it directly. I had one version in between where it was indeed broken :/

Lollie, this is with the most recent version, 0.9.7.

Edit: It also looks like the memory requirement for the 16G kernel may have increased from previous? Not sure if that's what's causing the break.

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: birdjan on February 06, 2020, 11:15:34 AM

on lol 0.9.3.0 with c31 with my rx580 I have 0.6. But on all up versions it is only 0.25-0.30,all with same overclocking.where is the problem?

Is this Windows 10? Because the 0.9.4 code changes increased the memory demand a bit ... could be that this causes the problem :/

Quote from: N2DCRYPT on February 08, 2020, 05:56:12 PM

Lollie, I'm attempting to use your miner for C31 on linux with Vega FEs, up to date ROCm. I keep getting "OpenCL init failure: Invalid kernel name" for all the GRIN kernels. Any idea what's wrong? Thanks!

In which version does this happen? Latest should work, but would like to test it directly. I had one version in between where it was indeed broken :/

N2DCRYPT

jr. member

Activity: 148

Merit: 5

Lollie, I'm attempting to use your miner for C31 on linux with Vega FEs, up to date ROCm. I keep getting "OpenCL init failure: Invalid kernel name" for all the GRIN kernels. Any idea what's wrong? Thanks!

CinErik

member

Activity: 189

Merit: 86

Hi;

@Lolliedieb, looks like some projects are planning algo changes soon, do you have any preparation for Progpow?

Kind regards

birdjan

newbie

Activity: 29

Merit: 0

on lol 0.9.3.0 with c31 with my rx580 I have 0.6. But on all up versions it is only 0.25-0.30,all with same overclocking.where is the problem?

Lolliedieb

member

Activity: 433

Merit: 48

The 5600xt not yet, but soon.

Hope to have a 6G version of C29M (with perfo of the current 8G code) soon and will activate the 4G C31 solver for this cards. C32 is on a bigger rework, so when thats done maybe a designated 6G version, too. Also all new codes will have Navi support

joeykolb

newbie

Activity: 81

Merit: 0

the rx 5600 XT will work on lolminer? i mean with all the algos in it

sea_of_blocks

newbie

Activity: 16

Merit: 0

Quote from: Lolliedieb on January 29, 2020, 03:18:43 PM

Well yes / no.
You can try to put in the command for killing the current instance and to restart it into the .bat, the question is if it will work. That depends on why exactly the card had crashed. In case of an algorithm problem it will work what you described, in case it did dead lock due to too high clock for your set voltage its very likely that the system will need a complete reboot - so it depends a bit on what had happened.

Thanks again for all your work! What's the command to kill/restart?

Lolliedieb

member

Activity: 433

Merit: 48

Well yes / no.
You can try to put in the command for killing the current instance and to restart it into the .bat, the question is if it will work. That depends on why exactly the card had crashed. In case of an algorithm problem it will work what you described, in case it did dead lock due to too high clock for your set voltage its very likely that the system will need a complete reboot - so it depends a bit on what had happened.

sea_of_blocks

newbie

Activity: 16

Merit: 0

Also, to have the miner restart after failure, so I simply enter the same command script for the start.bat into the reboot.bat?

Lolliedieb

member

Activity: 433

Merit: 48

Well it is a new algorithm - specs not yet released, but soon will be. Will see how this performs

sea_of_blocks

newbie

Activity: 16

Merit: 0

Quote from: Lolliedieb on January 29, 2020, 03:34:22 AM

Hey, just pushed 0.9.7

Changes

Windows: Increased GRIN-C32 performance on Navi cards by 15-18%
Linux: Increased GRIN-C32 performance on Vega, VII & Navi cards by 15-18%
Added a Grin Auto profit switcher (use: --coin GRIN-AUTO + further options). Please read https://github.com/Lolliedieb/lolMiner-releases/wiki/Grin-Automatic-Profit-Switching carefully how to use it and which pools are supported.

If you got any questions about the automatic algorithm selector let me know (but please read that page first Wink

)

Preview of what is does:
https://raw.githubusercontent.com/Lolliedieb/lolMiner-releases/master/Pictures/auto_switcher.jpeg

Quote from: fanisk21 on January 28, 2020, 07:27:36 PM

what is the mining dev fee for BEAM?

Its 1% since 0.7.0 - and will stay there

Quote from: sea_of_blocks on January 25, 2020, 02:37:13 AM

Trying to mine beam with my 5700's but they don't seem to be working... Miner reads average speed of 0.00 Sol/s. I'm receiving jobs, just not mining. Thoughts on how to resolve?

Mining solo (or trying) on win 10 pro 64 bit w/19.10.02 drivers. Win defender disabled and wallets online.

Any help is appreciated...

The beam algorithm at the moment needs a big rework on Navi - a lot of things not working there. I will try to fix that with 0.9.8 (but honestly: wait for BeamHash III and mine something else and buy Beam from the mining return... currently thats the more profitable way to get Beams...)

Quote from: kbs1 on January 22, 2020, 08:29:11 PM

Version 0.9.6.1 doesn't want to start up for me - it just hangs after initialising the first GPU. When I skip the second RX580 8GB, it hangs on the third. Tried rebooting, nothing. Cmd line is default for C29M, I only fiddled with --devices. Clocks and power limits are default (no overclocking or anything). Drivers are adrenalin 20.1.1 / W10 pro. In afterburner I see the gpu clock on currently stuck initialsing GPU at max, but it never proceeds.

0.9.6.1 needs a bit more memory - maybe that is the issue here. Does one of the card run the screen or is the rig headless? Also can you check how large your Windows pagefile (virtual memory) is? Please set it to at least 8G * number of cards (stupid Adrenaline Windows requirement that the virtual CPU memory needs to be as big as the used actual GPU memory... )

Thanks for the response! What's coming with beamhash III? 🤔

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: citronick on January 29, 2020, 03:55:32 AM

Any plans to support --coin GRIN-AUTO on Nicehash?

On Nicehash it would sense not to optimize the grin output but instead the btc you get for mining it. Hmm definitely possible when I can pull Nicehash API. I will check that, good idea.
But doesn't Nicehash miner already do this (it uses lolMiner for Grin algorithms on amds anyways ^^)

Quote from: thereal_kirilvvbg on January 29, 2020, 04:29:39 AM

I'm trying to mine AION with my P104-100 cards.

Let me check that ... did for ages not mine AION on Nvidias - but will have a look if its a general miner but there

thereal_kirilvvbg

newbie

Activity: 8

Merit: 0

Hi, guys,

Can you help me with this one:

Quote

Device 6:
   Name: P104-100
   Address: 8:0
   Vendor: NVIDIA Corporation
   Memory: 4029 MByte
   Active: true (Selected Algorithm: Equihash 210/9 Nvidia)
Device 7:
   Name: P104-100
   Address: 10:0
   Vendor: NVIDIA Corporation
   Memory: 4029 MByte
   Active: true (Selected Algorithm: Equihash 210/9 Nvidia)
Device 8:
   Name: Intel(R) HD Graphics 610
   Address: 4294967295:4294967295
   Vendor: Intel(R) Corporation
   Memory: 3213 MByte
   Active: false (not selected)

Connecting to pool...
Warning: resolve: The specified class was not found

I'm trying to mine AION with my P104-100 cards.

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 87. (Read 155842 times)