Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 93. (Read 155842 times)
lolMiner 0.9.2 Vega56 + Vega64 + Gigabyte 1070(gminer 1.82)
That seems good 
Ok, I have to admit: can not say why one card allows those settings and the other struggles. But seems your hash with slightly more clock and voltage is fine, then I would leave it at the more stable settings.
Ok, I have to admit: can not say why one card allows those settings and the other struggles. But seems your hash with slightly more clock and voltage is fine, then I would leave it at the more stable settings.
Well the 1.05 at those settings seem ok ... but why it drops to 0.45 with the lower clocks is strange - can you tell me which hive image you run? (I would pick the beta one, since this has amdgpu-pro 19.30 driver. Also I do not know if hive already pushed 0.9.2 final to their repo)
hiveos-vega-0.6-01@181121 VEGA
Linux kernel 4.15.18-hiveos
amdgpu-pro-19.30-934563-ubuntu-18.04.tar.xz
-------------------------
lolMiner.exe --coin GRIN-AT31 --pool stratum+tcp://grin31-eu.f2pool.com --port 13654 --user 0x0A9042***************b18A9eAa27C0A4D8C --pass x pause
-------------------------
lolMiner.exe --coin GRIN-AT31 --pool stratum+tcp://grin31-eu.f2pool.com --port 13654 --user 0x0A9042***************b18A9eAa27C0A4D8C --pass x pause
-------------------------
The problem about this line is the stratum+tcp:// ... just leave that out
Code:
lolMiner.exe --coin GRIN-AT31 --pool grin31-eu.f2pool.com:13654 --user 0x0A9042***************b18A9eAa27C0A4D8C --pass x
that way it should work
it is possible to get V56 to 1.0 g/s at only 130W (1220/900/0.825v).
HiveOS. Vega 56 with this parameters only 0.45h1350-1400/900/0.900v - 1.05h
Rostelecom blocks access to Telegram(((
https://yadi.sk/i/_RjUaght0xZAxw
https://yadi.sk/i/_RjUaght0xZAxw
it is possible to get V56 to 1.0 g/s at only 130W (1220/900/0.825v).
HiveOS. Vega 56 with this parameters only 0.45h1350-1400/900/0.900v - 1.05h
To get the higher performance, update drivers to 19.10.1.
bat-file
-------------------------
lolMiner.exe --coin GRIN-AT31 --pool stratum+tcp://grin31-eu.f2pool.com --port 13654 --user 0x0A9042***************b18A9eAa27C0A4D8C --pass x pause
-------------------------
I have Radeon-Software-Adrenalin-Edition-18.6.1 Windows 10/
I will update Adrenalin.
Thank you very much.
Where can I read about settings VEGA64?
-------------------------
lolMiner.exe --coin GRIN-AT31 --pool stratum+tcp://grin31-eu.f2pool.com --port 13654 --user 0x0A9042***************b18A9eAa27C0A4D8C --pass x pause
-------------------------
I have Radeon-Software-Adrenalin-Edition-18.6.1 Windows 10/
I will update Adrenalin.
Thank you very much.
Where can I read about settings VEGA64?
Why can 't I run lolMiner 0.9.1? How do I write the correct bat-file? Please.
I work now for teamredminer-v0.5.9.
4ps VEGA64 --> 2,3 g/s
it is normal?
I work now for teamredminer-v0.5.9.
4ps VEGA64 --> 2,3 g/s
it is normal?
Can you describe your problem more detailed?
There should be an example .bat for mining GRIN-31 included with the miner. Note that you will need Adrenalin 19.10.1 or newer on your sys. In case you still struggle feel free to dm me or join my Telegram channel https://t.me/lolMiner
Which amdmemtweak parameters are the best for Vega56 (C31 algo) ?
I would update to 0.9.2 release just pushed - that should be even better then the beta
See my msg below Update to 0.9.2
I just pushed 0.9.2 - this one should stabilize the GRIN-31 code even better and speed it up again - by about 5% in worst case and 10% (Navi) in best case
Also we tested a lot with optimized settings for this algorithms (thanks a lot to Dobromir Dobrev, MMP OS) - it is possible to get V56 to 1.0 g/s at only 130W (1220/900/0.825v). Stock may be faster when you do not care the electricity cost, but with this setting (V64 similar is possible) C31 hits the top end of Vega profitability
Testing results (v0.9.1 -> 0.9.2 beta)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
Which amdmemtweak parameters are the best for Vega56 (C31 algo) ?Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
thanx
Why can 't I run lolMiner 0.9.1? How do I write the correct bat-file? Please.
I work now for teamredminer-v0.5.9.
4ps VEGA64 --> 2,3 g/s
it is normal?
I work now for teamredminer-v0.5.9.
4ps VEGA64 --> 2,3 g/s
it is normal?
its not the miner, every miner does, claymore, lolminer , phoenix miner, it is the mb? i think a fucked up some straps, and from then its only problems
if you do have a original backup of the bios
i will recommend flashing them and see if the problem persists
it seems like a card instability issue
also did you run pixel patcher to patch amd drivers?
its not the miner, every miner does, claymore, lolminer , phoenix miner, it is the mb? i think a fucked up some straps, and from then its only problems
Thats hard to debug from the distance. What exact cards are these and which settings do this cards have? Also what are you trying to mine with lolMiner (all the algos here are a bit different) and what lolMiner version and which driver you use. We need a bit more info here to help 
Most likely the undervolt is too low for the needed compute power... but thats only a very vague guess
Most likely the undervolt is too low for the needed compute power... but thats only a very vague guess
Starts mining, and blue screen (atikmpagsys), then after restart, two of my cards dont even start, and not showing either in devmgr
what could be? pwr supply?
what could be? pwr supply?
That will be tough ^^ A bit better is possible, but not as much as the 8G Navis just did
Anyways, planing 0.9.2 next werk - some more tweeks to be tested before
Anyways, planing 0.9.2 next werk - some more tweeks to be tested before
Hey, just wanted yyou to know that I pushed a beta version to.my testing repo - not yet fully production ready, but would appreciate some testing. Here is the link: https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.9.2beta
Only changes so far is some slight improvement for C31 (while 4G solver is defect atm - will be fixed before release).
Testing results (v0.9.1 -> 0.9.2 beta)
Radeon VII (stock): 1.7 -> 1.76 (+3.5%)
Radeon VII (1400 / 1000 @ 0.825V): 1.35 -> 1.4 (+3.7%)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
RX 5700 (Powercolor Red Dragon, Silent Bios): 0.78 -> 0.84 (+7.6%)
Let me know more or if there are issues with the beta. Release of official version some time next week. Want to go over more code sections
Only changes so far is some slight improvement for C31 (while 4G solver is defect atm - will be fixed before release).
Testing results (v0.9.1 -> 0.9.2 beta)
Radeon VII (stock): 1.7 -> 1.76 (+3.5%)
Radeon VII (1400 / 1000 @ 0.825V): 1.35 -> 1.4 (+3.7%)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
RX 5700 (Powercolor Red Dragon, Silent Bios): 0.78 -> 0.84 (+7.6%)
Let me know more or if there are issues with the beta. Release of official version some time next week. Want to go over more code sections
Nice Works, I'm wait improve 4G
Hey, just wanted yyou to know that I pushed a beta version to.my testing repo - not yet fully production ready, but would appreciate some testing. Here is the link: https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.9.2beta
Only changes so far is some slight improvement for C31 (while 4G solver is defect atm - will be fixed before release).
Testing results (v0.9.1 -> 0.9.2 beta)
Radeon VII (stock): 1.7 -> 1.76 (+3.5%)
Radeon VII (1400 / 1000 @ 0.825V): 1.35 -> 1.4 (+3.7%)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
RX 5700 (Powercolor Red Dragon, Silent Bios): 0.78 -> 0.84 (+7.6%)
Let me know more or if there are issues with the beta. Release of official version some time next week. Want to go over more code sections
Only changes so far is some slight improvement for C31 (while 4G solver is defect atm - will be fixed before release).
Testing results (v0.9.1 -> 0.9.2 beta)
Radeon VII (stock): 1.7 -> 1.76 (+3.5%)
Radeon VII (1400 / 1000 @ 0.825V): 1.35 -> 1.4 (+3.7%)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
RX 5700 (Powercolor Red Dragon, Silent Bios): 0.78 -> 0.84 (+7.6%)
Let me know more or if there are issues with the beta. Release of official version some time next week. Want to go over more code sections
Ah, now we are talking about the right range
Glad you got it working
By the way I got a telegram channel now for support: https://t.me/lolMiner
Glad you got it working
By the way I got a telegram channel now for support: https://t.me/lolMiner
With current C31 code Vega 64 does 1.1 g/s at 180 W (settings: 1380 / 1000 @ 0.912V) making it the 2nd most profitable algorithm after CNR for V64 (!!!).
https://ibb.co/JmrWnF3
Testing this :
6x Vega 64 rig
Clocks : ODT : 1344/1028/920mv
Results : 3.2 g/s for 6 cards => 0.53 g/s per card
Power(wall) : 1305 watts => approx 205 watts per card
No where near your 1.1 g/s @ 180 watts
Note: when i started the miner, it say
Code:
Name: Radeon RX Vega
Address: 9:0
Vendor: Advanced Micro Devices (AMD)
Memory: 8176 MByte (8171 MByte free)
Active: true (Selected Algorithm: Cuckatoo 31-4G)
May be need to enable 8gb solver for vega 64 ?Address: 9:0
Vendor: Advanced Micro Devices (AMD)
Memory: 8176 MByte (8171 MByte free)
Active: true (Selected Algorithm: Cuckatoo 31-4G)
May be need to enable 8gb solver for vega 64 ?
Thats odd... is this 0.9 or 0.9.1? Please check!
I ask because even the 0.9.1 4G solver should be much quicker.
If its 0.9: then the 8G does not load because the Binary Kernel can not be loaded --> install Adrenalin 19.10.1 or newer in Windows or 19.30 in Linux. Also upgrade to 0.9.1, pool hash is better with that one.
Retested :
6x Vega 64 Rig on windows 10
Results:
Code:
Driver : 18.6.1
0.9.0 -> 3.200 g/s - after fee - 3.168 @ 1305 watt => 0.528 g/s @ 206.67 watt -> 2.555 g/w
Clocks : 1344/1028/920
Driver : 19.10.1
0.9.1 -> 6.160 g/s - after fee - 6.098 @ 1205 watt => 1.016 g/s @ 190.00 watt -> 5.347 g/w
Clocks : 1305/1028/850
0.9.0 -> 3.200 g/s - after fee - 3.168 @ 1305 watt => 0.528 g/s @ 206.67 watt -> 2.555 g/w
Clocks : 1344/1028/920
Driver : 19.10.1
0.9.1 -> 6.160 g/s - after fee - 6.098 @ 1205 watt => 1.016 g/s @ 190.00 watt -> 5.347 g/w
Clocks : 1305/1028/850
Reaching 1.1 on a vega 64 is possible in lolminer also
Jump to: