Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 94. (Read 155842 times)

Thats odd... is this 0.9 or 0.9.1? Please check!
I ask because even the 0.9.1 4G solver should be much quicker.

If its 0.9: then the 8G does not load because the Binary Kernel can not be loaded --> install Adrenalin 19.10.1 or newer in Windows or 19.30 in Linux. Also upgrade to 0.9.1, pool hash is better with that one.

It's true only very partially. We did Beta image  which supporting RX 5700 series with UV/OC and this card seems to be hot propect for the future. Ofc if mining not die totally  
But supporting this cards by mining software currently very awful. I would even say that support by mining software is even worse than the drivers for these cards  

https://ibb.co/JmrWnF3

Testing this :
6x Vega 64 rig
Clocks : ODT : 1344/1028/920mv
Results : 3.2 g/s for 6 cards => 0.53 g/s per card
Power(wall) : 1305 watts => approx 205 watts per card

No where near your 1.1 g/s @ 180 watts 
Note: when i started the miner, it say
May be need to enable 8gb solver for vega 64 ?

Well ... hmm .. then WTM is off ^^
But even then it does not look too bad - I have to admit with 50 at 170 Ethash wins, next then is SUMO (CNR) and then next is Grin-31 ... so ok right, Ethash is in front but not that much - at least its good enough it should not be such a niche

You didn't get what he meant. 1.1g/s @ 180W vs 50MH/s @ 160-170W is the comparison which should be used. I am pretty sure you're going to argue that 160-170W, this is Vega64 actual consumption measured at the wall. Vega56 is slightly (150-155W) better for ethash.

You are totally wrong with your calculation. Vega64 can easily make 50+mhs eth with lower than 180w power consumption. ))

Holy smokes!
That's an amazing profit for a 1080ti with the current market price though.
Is there a thread for it in the Announcement section?
I must have missed it.

I still remember the time when in 2017, there were these newly announced low cap coins which resulted in huge profits compared to ETH and such. One such coin I remember was Signatum.

Did a test yesterday with 10* rented 1080ti. 10h ago, profit displayed on pool side was like 6$ /day /card ...

EDIT
EXCC was like a joke. 2 pools, lots of chain problems, i was the biggest hashrate on it for a very long time. But i made some good profit on it, for a time.

A good idea! Will note that for near future features to be added.



Thanks John for pointing that out - I will prepare a miner for the fork





The problem with Cortex network is that its too small ... gminer was just earlier discovering it and now making a miner is kind of worthless. I mean... Cortex Cuckaroo-30 is an interesting algorithm to tune and it would be a lot of fun. Still I must ROI my time somehow. Just to drop a number: With current C31 code Vega 64 does 1.1 g/s at 180 W (settings: 1380 / 1000 @ 0.912V) making it the 2nd most profitable algorithm after CNR for V64 (!!!). Yet at my fee connector I get about 1 g/s meaning not even 100 of this cards mine this algorithm with my miner. (By the way: stale shares is ~2% and 0 invalids ... thats record breaking for this algo...)
So I am making maybe 35 cents each day from this algo - if it continues this way I can not expect that the time put into coding this ever ROIs for me. Then starting a new similar algorithm for a much smaller network would be just insane - If someone wants to fund the development things turn. For ExchangeCoin for example we had the same problem, but there the devs funded me (3 digit number, so not even too expensive) to build a proper miner, thats also why Exchange Coin was 0 fee in the first releases.

you are already late for party on cortex,diff went to moon with new gminer

We need an AMD miner for Cortex !

Cuckarood29 will no longer be active on Grin's 2nd Hard Fork around Jan 15, 2020,
to be replaced by Cuckaroom29:

https://www.grin-forum.org/t/next-pow-cuckaroom-unveiled-at-grincon1

Cuckaroom miners can first be tested on floonet which hard forks around Dec 19.

Please add --list options to show devices list

Many Thanks. Great Fiji get 0.53 g/s 

What power on 5700/xt for GRIN31 guys ? Thanks

I only did a short run on an under-clocked one at about 0.9 g/s ... not sure what a normal could do - it should be around 1.05 to 1.1... I will get one soon to test that.


Not yet ... but will come once I get my own one. Till recently it was extremely hard to get this cards to do anything useful at all

Hello......................

Does your miner support beam hash II & equihash 192.7 for rx 5700 & rx 5700 xt ?, if so, what are the expected hash rates for both cards ?.
Thanks.

anyone have the hashrate for a regular rx 5700?

I just pushed a hotfix. Can you check if that works with your card?
https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.9.1hotfix

Thanks for the report
Well the 290 is a 4G card - it has to run some time memory trade of to mine this algorithm at all - the 390 with 8G (but same chip) would be much quicker. This 4G is rather for grin enthusiasts




Thanks very much! Thats quite good. Please report if thats consistent with pool. Flagged Navi support as beta because was not able to fully verify it, because I still wait for my own. Currently sometimes test on a friends rig ^^




Let me check that. Seems like a bug in my GPU detection, the empty brackets indicate my miner believes it does not have the kernel for this. Will check and fix

Edit: Found the bug why Fiji is not loaded correctly. Code is already fixed, will release it asap.


Ps:
Wanted to mention that these 7mn AMDs as the VII and the Navi are undervolting monsters.
For example stock the VII gives 1.7 g/s at mine, but at 280W. Clocking down to 1450 at 0.82v costs a little performance, but the result is 1.43 g/s at only 130W - if you need to look to the energy bill thats the much better option Expect similar efficiency with Navi
(By the way the Sys where we tested V64 was running 1380 / 1000 @ 0.912V... approx 1.12 g/s at 170W).