lolMiner 1.64: Fastest Kaspa miner in market - page 99.

wacholek

newbie

Activity: 20

Merit: 0

Quote from: Branko on July 29, 2019, 03:19:22 AM

When I try to mine GENX using command line, I get following output:

"Warning: No user profile defined in command line (--profile missing)
Using only DEFAULT section and command line input
Reading pool data from command line
Error: No coin profile find for coin GENX
"

From user manual, I thought GENX can be mined that way

I have the same problem. It started from v 0.7.0. Worked fine on 0.6.0.
Please fix it.

Branko

sr. member

Activity: 2562

Merit: 321

When I try to mine GENX using command line, I get following output:

"Warning: No user profile defined in command line (--profile missing)
Using only DEFAULT section and command line input
Reading pool data from command line
Error: No coin profile find for coin GENX
"

From user manual, I thought GENX can be mined that way

boregepco

newbie

Activity: 26

Merit: 0

If i found a block i will receive some kind of message in the miner or this will be a normal share?

Cdlsports

newbie

Activity: 18

Merit: 0

I haven’t been able to get the new zelcash also to work on smos. Any help as to what’s causing ? Crashes immediately not over clicked or undervolted. I have a pic, but not sure how to attach?

justoiurii

newbie

Activity: 103

Merit: 0

Hello, collegues)
Could someone advise me Afterburner setting for 192_7 algo? I'm using RX480 samsung 8 Gb, bc drivers. And is it worth to update for newer driver for example 18.6.1?
Thanks in advance)))

joeykolb

newbie

Activity: 81

Merit: 0

what is this mean? after i shut down my miner, it wont getting the coins? debit_AP , and TXfee, is in red and ,with a couple of coins,.. 1.02153047,and 1.40893550

hurr1cane

full member

Activity: 234

Merit: 100

hi dev, is it possible to further enhance/optimize the hashrate for the Radeon VII , im overclocked 192,7 @ 34-36 h/sols

Atrixis

newbie

Activity: 18

Merit: 0

how to connect on sparkpool? algo grin 31

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: kissmarx on July 18, 2019, 01:02:29 PM

Hi dev, can we have a fix on this please:

Shares not accepted in pools for YCASH (Equihash 192,7)

YCASH works like this:

Code:

./lolMiner --coin AUTO192_7 --overwritePersonal ZcashPoW --pool eu1-ycash.flypool.org --port 3333 --user s1REuJN96Pu273xTBn5oKKfRab4gZeojtkj

or

Code:

lolMiner.exe --coin AUTO192_7 --overwritePersonal ZcashPoW --pool eu1-ycash.flypool.org --port 3333 --user s1REuJN96Pu273xTBn5oKKfRab4gZeojtkj

Then you are fine

But will add --coin YCASH in next release.

Quote from: cryptomaxsun on July 17, 2019, 09:36:24 AM

RX 480 4 Gb, Win 7, driver Robinhood, grin29.

Low hashrate, is that normal?

No, that is not normal. Is the GPU doing display in parallel / could it round out of memory somehow? I had my 580 4G running at 2.2 g/s to 2.4 g/s (depending on settings), so everything below 2 is too slow for your card...

Quote from: UselessGuru on July 17, 2019, 02:47:10 PM

Zpool does not seem to work:

Let me check that - will reply later.

Quote from: UselessGuru on July 17, 2019, 02:45:19 PM

Same error with 0.8.5

Yes, got aware of this after 0.8.5 was already build. But they do not reply on my support request. They changed something odd in the beam stratum thats not standard...

kissmarx

sr. member

Activity: 1106

Merit: 251

Hi dev, can we have a fix on this please:

Shares not accepted in pools for YCASH (Equihash 192,7)

UselessGuru

jr. member

Activity: 200

Merit: 3

Zpool does not seem to work:

Code:

lolminer.exe --coin SAFE --pool equihash192.eu.mine.zpool.ca --port 2192 --user ************************************* --pass *********,c=BTC --apiport 4000 --disable_memcheck 1 --workbatch HIGH --shortstats 5 --digits 3 --tls 0 --devices 0
+---------------------------------------------------------+
| _ _ __ __ _ ___ ___ |
| | | ___ | | \/ (_)_ __ ___ _ __ / _ \ ( _ ) |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | |/ _ \ |
| | | (_) | | | | | | | | | __/ | | |_| | (_) | |
| |_|\___/|_|_| |_|_|_| |_|\___|_| \___(_)___(5) |
| |
| |
| This software is for mining |
| Equihash 96/5, 144/5, 210/9 |
| EquihashR 150/5/0 (BeamHash) |
| EquihashR 125/4/0 (ZelHash) |
| CuckarooD 29 |
| Cuckatoo 31 |
| |
| |
| Made by Lolliedieb, July 2019 |
+---------------------------------------------------------+
Warning: No user profile defined in command line (--profile missing)
Using only DEFAULT section and command line input
Reading pool data from command line
lolMiner is configured to mine Safecoin(SAFE), Equihash 192/7

Setup Miner...
Device 0:
Name: GeForce GTX 1080 Ti
Address: 1:0
Vendor: NVIDIA Corporation
Memory: 11264 MByte
Active: true (Selected kernel: Equihash 192/7 Nvidia)
Device 1:
Name: GeForce GTX 1060 6GB
Address: 4:0
Vendor: NVIDIA Corporation
Memory: 6144 MByte
Active: false (not selected)
Device 2:
Name: Radeon RX 580 Series
Address: 8:0
Vendor: Advanced Micro Devices (AMD)
Memory: 8192 MByte (8138 MByte free)
Active: false (not selected)

Connecting to pool...
Connected to equihash192.eu.mine.zpool.ca:2192 (TLS disabled)
Subscribed to stratum server
Authorized worker: 1GPSq8txFnyrYdXL8t6S94mYdF8cGqVQJF
New target received: 00ffff0000000000
New job received: 738b
Start Mining...
Average speed (5s): 8.028 sol/s
Average speed (5s): 28.194 sol/s
Average speed (5s): 31.794 sol/s
Average speed (5s): 28.394 sol/s
New job received: 738d
Average speed (5s): 30.194 sol/s
New job received: 738e
New job received: 738f
GPU 0: Share not accepted
GPU 0: Share not accepted
Average speed (5s): 33.200 sol/s
New job received: 7390
Average speed (5s): 29.994 sol/s
New job received: 7391

Code:

lolminer.exe --coin BTG --pool equihash144.eu.mine.zpool.ca --port 2144 --user ************************************* --pass *********,c=BTC --apiport 4000 --disable_memcheck 1 --workbatch HIGH --shortstats 5 --digits 3 --tls 0 --devices 0
+---------------------------------------------------------+
| _ _ __ __ _ ___ ___ |
| | | ___ | | \/ (_)_ __ ___ _ __ / _ \ ( _ ) |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | |/ _ \ |
| | | (_) | | | | | | | | | __/ | | |_| | (_) | |
| |_|\___/|_|_| |_|_|_| |_|\___|_| \___(_)___(5) |
| |
| |
| This software is for mining |
| Equihash 96/5, 144/5, 210/9 |
| EquihashR 150/5/0 (BeamHash) |
| EquihashR 125/4/0 (ZelHash) |
| CuckarooD 29 |
| Cuckatoo 31 |
| |
| |
| Made by Lolliedieb, July 2019 |
+---------------------------------------------------------+
Warning: No user profile defined in command line (--profile missing)
Using only DEFAULT section and command line input
Reading pool data from command line
lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144/5

Setup Miner...
Device 0:
   Name: GeForce GTX 1080 Ti
   Address: 1:0
   Vendor: NVIDIA Corporation
   Memory: 11264 MByte
   Active: true (Selected kernel: Equihash 144/5 Nvidia)
Device 1:
   Name: GeForce GTX 1060 6GB
   Address: 4:0
   Vendor: NVIDIA Corporation
   Memory: 6144 MByte
   Active: false (not selected)
Device 2:
   Name: Radeon RX 580 Series
   Address: 8:0
   Vendor: Advanced Micro Devices (AMD)
   Memory: 8192 MByte (8138 MByte free)
   Active: false (not selected)

Connecting to pool...
Connected to equihash144.eu.mine.zpool.ca:2144 (TLS disabled)
Subscribed to stratum server
Authorized worker: 1GPSq8txFnyrYdXL8t6S94mYdF8cGqVQJF
New target received: 00ffff0000000000
New job received: 81bb3
Start Mining...
GPU 0: Share not accepted
GPU 0: Share not accepted
Average speed (5s): 18.964 sol/s
GPU 0: Share not accepted
GPU 0: Share not accepted
GPU 0: Share not accepted

Mining BTG on Zergpool is fine:

Code:

lolminer.exe --coin BTG --pool equihash144.mine.zergpool.com --port 2146 --user ************************************* --pass *********,c=BTC --apiport 4000 --disable_memcheck 1 --workbatch HIGH --shortstats 5 --digits 3 --tls 0 --devices 0
+---------------------------------------------------------+
| _ _ __ __ _ ___ ___ |
| | | ___ | | \/ (_)_ __ ___ _ __ / _ \ ( _ ) |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | |/ _ \ |
| | | (_) | | | | | | | | | __/ | | |_| | (_) | |
| |_|\___/|_|_| |_|_|_| |_|\___|_| \___(_)___(5) |
| |
| |
| This software is for mining |
| Equihash 96/5, 144/5, 210/9 |
| EquihashR 150/5/0 (BeamHash) |
| EquihashR 125/4/0 (ZelHash) |
| CuckarooD 29 |
| Cuckatoo 31 |
| |
| |
| Made by Lolliedieb, July 2019 |
+---------------------------------------------------------+
Warning: No user profile defined in command line (--profile missing)
Using only DEFAULT section and command line input
Reading pool data from command line
lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144/5

Setup Miner...
Device 0:
   Name: GeForce GTX 1080 Ti
   Address: 1:0
   Vendor: NVIDIA Corporation
   Memory: 11264 MByte
   Active: true (Selected kernel: Equihash 144/5 Nvidia)
Device 1:
   Name: GeForce GTX 1060 6GB
   Address: 4:0
   Vendor: NVIDIA Corporation
   Memory: 6144 MByte
   Active: false (not selected)
Device 2:
   Name: Radeon RX 580 Series
   Address: 8:0
   Vendor: Advanced Micro Devices (AMD)
   Memory: 8192 MByte (8138 MByte free)
   Active: false (not selected)

Connecting to pool...
Connected to equihash144.mine.zergpool.com:2146 (TLS disabled)
Subscribed to stratum server
New target received: 0028000000000000
New job received: d9f3
Start Mining...
Authorized worker: 1GPSq8txFnyrYdXL8t6S94mYdF8cGqVQJF
Average speed (5s): 43.748 sol/s
Average speed (5s): 60.376 sol/s
Average speed (5s): 57.765 sol/s
GPU 0: Share accepted (110 ms)
GPU 0: Share accepted (105 ms)
Average speed (5s): 57.166 sol/s

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: angelbbs on July 14, 2019, 07:00:02 AM

lolminer 0.8.4
Error on new nicehash platform

Connecting to pool...
Connected to beam.eu-new.nicehash.com:3370 (TLS disabled)
Authorized worker: 3F2v4K3ExF1tqLLwa6Ac3meimSjV3iUZgQ.Farm3
Property Tree error: conversion of data to type "unsigned __int64" failed

Same error with 0.8.5

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: Kgonla on July 17, 2019, 02:30:39 AM

Could someone tell me what is wrong with my config?

Bat file:

@echo off

setlocal enableDelayedExpansion

set "PARAMS=--profile %PROFILE%"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cls
lolMiner.exe !PARAMS!
timeout 10

user_config.json:

{
   "DEFAULTS" : {
      "DEVICES" : [0,1],
      “ASM” : 1,
      “DIGITS” : 2,
      "APIPORT" : 0
   },

   "GRIN29" :
   {
      "COIN" : "GRIN-AD29",
      "POOLS" : [
         {"POOL" : "mine.thegrinpool.com",
          "PORT" : "4747",
          "USER" : " Huh

@gmail.com",
          "PASS" : "x"}
      ]
   }
}

Your problem is indeed the jason file. You have invalid quote characters in these two lines:

Code:

“ASM” : 1,
“DIGITS” : 2,

Change it to

Code:

"ASM" : 1,
"DIGITS" : 2,

https://jsonblob.com/ is just great to check the syntax of a json file :-)

Kgonla

newbie

Activity: 129

Merit: 0

Quote from: cryptomaxsun on July 17, 2019, 09:36:24 AM

https://picua.org/images/2019/07/17/da23215b9c447b84f35a59f0070d6920.jpg

RX 480 4 Gb, Win 7, driver Robinhood, grin29.

Low hashrate, is that normal?

I'm running same except for the GPU, mine is a RX 580 4G
It is configured for mining ethereum with 1150 MHz & modded memory straps
It gives me 2 g/s

cryptomaxsun

legendary

Activity: 2744

Merit: 1387

Ukrainians will resist

RX 480 4 Gb, Win 7, driver Robinhood, grin29.

Low hashrate, is that normal?

Kgonla

newbie

Activity: 129

Merit: 0

Quote from: UnclWish on July 17, 2019, 07:12:52 AM

Quote from: Kgonla on July 17, 2019, 02:30:39 AM

Could someone tell me what is wrong with my config?

https://fotos.subefotos.com/37f53b0fb52d853835ba1702df9ef58fo.jpg

Bat file:

@echo off

setlocal enableDelayedExpansion

set "PARAMS=--profile %PROFILE%"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cls
lolMiner.exe !PARAMS!
timeout 10

user_config.json:

{
   "DEFAULTS" : {
      "DEVICES" : [0,1],
      “ASM” : 1,
      “DIGITS” : 2,
      "APIPORT" : 0
   },

   "GRIN29" :
   {
      "COIN" : "GRIN-AD29",
      "POOLS" : [
         {"POOL" : "mine.thegrinpool.com",
          "PORT" : "4747",
          "USER" : " Huh

@gmail.com",
          "PASS" : "x"}
      ]
   }
}

Try to remove "!" from bat. Make this string:

lolMiner.exe PARAMS

and you must run bat with option - name of profile. F.e. run_bat GRIN29

Thank your for helping.
The problem is in the .json file.
I entered all the commands in the .bat & after deleting the .json now is working.

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: ?? on ??

Hey lolMiner any chance in supporting Swap soon? They are pretty similar to Grin.

Grin Cuckaroo29 -> Cycle length: 42 bits / Nonce lenght: 8 bytes
Swap Cuckaroo29s -> Cycle length: 32 bits / Nonce lenght: 4 bytes

For the share verification, the cycle needs to be packed according to the reduced length.

More detailed information:
https://github.com/swap-dev/swap/wiki/Develop-for-Swap-Mining
https://i.imgur.com/yqmtSbo.png
https://i.imgur.com/cs5DkcB.png
https://i.imgur.com/JM0POTg.png
https://i.imgur.com/Vki4dw3.png
https://bitcointalksearch.org/topic/xwpswap-mining-cuckaroo29s-micropool-5141707 (Swap mining/PoW discussion thread)

I will look into that - my current mission is to make my cuckarood and cuckatoo kernels quicker, but that is something on my list as well

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Kgonla on July 17, 2019, 02:30:39 AM

Could someone tell me what is wrong with my config?

Bat file:

@echo off

setlocal enableDelayedExpansion

set "PARAMS=--profile %PROFILE%"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cls
lolMiner.exe !PARAMS!
timeout 10

user_config.json:

{
   "DEFAULTS" : {
      "DEVICES" : [0,1],
      “ASM” : 1,
      “DIGITS” : 2,
      "APIPORT" : 0
   },

   "GRIN29" :
   {
      "COIN" : "GRIN-AD29",
      "POOLS" : [
         {"POOL" : "mine.thegrinpool.com",
          "PORT" : "4747",
          "USER" : " Huh

@gmail.com",
          "PASS" : "x"}
      ]
   }
}

Try to remove "!" from bat. Make this string:

lolMiner.exe PARAMS

and you must run bat with option - name of profile. F.e. run_bat GRIN29

Kgonla

newbie

Activity: 129

Merit: 0

Could someone tell me what is wrong with my config?

https://fotos.subefotos.com/37f53b0fb52d853835ba1702df9ef58fo.jpg

Bat file:

@echo off

setlocal enableDelayedExpansion

set "PARAMS=--profile %PROFILE%"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cls
lolMiner.exe !PARAMS!
timeout 10

user_config.json:

{
   "DEFAULTS" : {
      "DEVICES" : [0,1],
      “ASM” : 1,
      “DIGITS” : 2,
      "APIPORT" : 0
   },

   "GRIN29" :
   {
      "COIN" : "GRIN-AD29",
      "POOLS" : [
         {"POOL" : "mine.thegrinpool.com",
          "PORT" : "4747",
          "USER" : " Huh

@gmail.com",
          "PASS" : "x"}
      ]
   }
}

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: issie81 on July 11, 2019, 01:23:36 PM

Quote from: SigiSinatra on June 30, 2019, 05:35:08 PM

How to get 0.9 on GRIN with Vega ?
I can't get over 0.77~0.8 no matter which settings I try.
Is CPU important ?

Thank you.

same here how C31 do 0.9 ?
using Vega 56 btw

I recently observed that my grin codes somehow behave a bit different on different drivers - somehow rocm driver giving a better performance. I will investigate this why (because I did no seperate code for rocm ... it should be the same.)

Quote from: angelbbs on July 14, 2019, 07:00:02 AM

lolminer 0.8.4
Error on new nicehash platform

Connecting to pool...
Connected to beam.eu-new.nicehash.com:3370 (TLS disabled)
Authorized worker: 3F2v4K3ExF1tqLLwa6Ac3meimSjV3iUZgQ.Farm3
Property Tree error: conversion of data to type "unsigned __int64" failed

Oh dear ... what the heck ... will look to that asap. (Likely an other release then this week ... dang...)

Quote from: dvz35 on July 16, 2019, 06:41:56 AM

how do I set up backup pools? need to create a separate file? give the file setup
кaк нacтpoить peзepвныe пyлы? нyжнo coздaвaть oтдeльный фaйл? дaйтe нacтpoйкy фaйлa

Most easy is when you use --pool --port --user and so on you can give multiple entries by separating them with ';' character. E.g. --port 9996;3333 .... the order needs to be the same, so here the 2nd port belongs to the 2nd entry of --pool and 2nd entry of --user

Quote from: WBrainDamage on July 11, 2019, 04:39:32 AM

Anyone?

That looking like crooked OpenCL drivers - can you try to run clinfo in command line and send me the output via private message?

Quote from: Globalminingcorp on July 10, 2019, 03:20:30 PM

I tried to mine witht he latest version of lolminer on a equihash 96_5 coin (not MNX). I used --coin MNX to make it 96_5 and set the --overwritePersonal to the correct string from the pool. But when it starts mining it only gives rejected shares. Any ideas?

Device 1:
Name: GeForce GTX 1050 Ti
Address: 2:0
Vendor: NVIDIA Corporation
Memory: 4096 MByte
Active: true (Selected kernel: Equihash 96/5, 3G & 4G)

Subscribed to stratum server
New target received: 0008000000000000
New job received: cd03
Start Mining...
Authorized worker: xxx
GPU 1: Share not accepted

The question is: which coin is this?

Quote from: joeykolb on July 13, 2019, 01:26:40 PM

ANYONE? how u use Lolminer with pool //grinmint.com, they use email-with rigname, how u put email in config file?

The "[email protected]/rig21" stuff needs to be put to the user field.
So in command line --user [email protected]/rig21
or in config file "USER" : "[email protected]/rig21",

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 99. (Read 155532 times)