Pages:
Author

Topic: [ANN] LIZUS 🚀🔥🔥🚀 SKEIN - POW - POS ��🔥🔥🚀 MASTERNODES 🚀🔥🔥🚀 - page 10. (Read 34797 times)

newbie
Activity: 6
Merit: 0
full member
Activity: 350
Merit: 100
XDNA - Most innovative cryptocurrency in 2018
Hi, Don't you have a social media campaign? seems o be a great project.. and I wish good luck for the project to be success

LIZ have twitter campaign.
newbie
Activity: 56
Merit: 0
Hi, Don't you have a social media campaign? seems o be a great project.. and I wish good luck for the project to be success
newbie
Activity: 43
Merit: 0
A. Masternode reward / day
B. 10,000 LIZ POS reward / day


How does A and B differ?
Basic question, staking and Masternode are different. There are only deals between them which set up by dev, hence each part will receive exact proportional rewards per block.
member
Activity: 118
Merit: 10
A. Masternode reward / day
B. 10,000 LIZ POS reward / day


How does A and B differ?
newbie
Activity: 4
Merit: 0
I didn’t have the original Wallet.dat file from the Lizus directory. However, i did have the entire Backups folder with
Several backup files of the past two months. I.e (“wallet.dat.02-11-22.07”) or something like that.
I renamed the latest one to Wallet.dat and manually dragged it and replaced the new wallet.dat with the
Renamed one and it didn’t work. So i went into the console of the Lizus app and imported my old wallet
Address but now it is “Watch-Only”. I read online that i can unlock it with my private key, but I don’t remember saving
A private key file. Unless the private key is somehow stored on the wallet.dat files... i remember the passphrase
I used to encrpyt my original wallet though. Is there some way to retrieve my private key with my passphrase and
Import it into my new wallet? I want to be able to replace my new address with my old address and have everything
Back to the way it was before... I don’t understand why this process is so tedious and confusing.

If you just rename the backup outside properties it will have a # for an extension, open it's properties & rename it in there, make sure it ends with ".dat" & it should work fine, I hope lol good luck!

I got it to work thank you very much. It was an intense learning process haha.
full member
Activity: 266
Merit: 100
Next-Gen Blockchain Ecosystem - Luxcore.io
here is my retweet link below:
https://twitter.com/silhouette10/status/963259624672567296

how to give the wallet addr? after give away announment ? Huh Huh Huh
legendary
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
-ANNOUNCEMENT- NEW LIZUS POOL offering 0% fees (for limited time, guaranteed low fees and transparency after!) - https://cryptopool.party - The Crypto Pool Party!



https://cryptopool.party

-Run by 100% full-time cypto entrepreneurs
-US based (Houston, TX DataCenter)
-Dedicated admins
-Total Transparency, NO HIDDEN FEES!
-Discord support server https://discord.gg/3VuQxbx
-Constant new coin additions and speculation additions.
-Solid server with 99.9% uptime and synchronous 1Gb/s line (adding backup servers as well)
-Custom firewall with DDOS/attack mitigation.
-YIIMP based no registration needed.


SIMPLY SPECIFY YOUR USER AS YOUR WALLET FOR THE COIN YOU'RE MINING and the port for the algo...

EXAMPLE FOR Lizus -


Code:
-o stratum+tcp://cryptopool.party:4933 -u (LIZUS WALLET ADDRESS).WORKER -p c=LIZ

Your default difficulty is set to 0.1, makes for a lot of rejected & duplicate shares, I changed it with "-p d=1" but just thought I'd let you know I think 1 or 2 would be a better default. Wink

Thank you, yea, the pool is brand new, we're still doing a lot of configuration.

We will definitely make the change.

Hopefully you enjoy the UI changes and what we've done so far. Thank you!


NEW UI - https://cryptopool.party

MUCH MORE COMING! the pool party, your adult place to drink and mine. Cheesy
newbie
Activity: 2
Merit: 0
The balance on the Cole was 0. Monet does not reach. The status of the conflict. What to do? https://lizus.uexplorer.me/wallets/LNt4guUMNZwNz8uGhnkrzBPSpMAkRBEzh4
newbie
Activity: 97
Merit: 0

Idk about the socks business, so rather than trying to figure that out, I suggest starting from scratch.
1 - Backup your wallet.dat file if you've used it
~
The first step is the most important one, which will help us to secure our wallet. Please dont remember backing up wallet before trying to do anything.
full member
Activity: 274
Merit: 100
a project that will develop in the future, where I can see the composition of this project team that will make this project grow, and also how much it takes to have funds in the account
newbie
Activity: 46
Merit: 0
Huh

 My wallet wasn't syncing, so I messed around with the settings. I clicked the proxy box under the settings and now when I try to start my wallet I can't even open it. I get an error: Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. How do I fix this?

I'd uncheck the box if I could, but I can't even open the application because of the error.

Idk about the socks business, so rather than trying to figure that out, I suggest starting from scratch.
1 - Backup your wallet.dat file if you've used it
2 - Delete the Lizus data (Usually in ...\Users\%Username%\AppData\Roaming)
3 - Run Lizus-qt again to recreate data folders
4 - Open lizus.conf with notepad
5 - Paste the following peer list into lizus.conf & save (Nodes retrieved from: https://www.coinexchange.io/network/peers/LIZ)
Code:
addnode=89.178.78.231
addnode=46.72.240.143
addnode=67.80.150.57
addnode=92.247.173.32
addnode=92.248.130.219
addnode=68.43.48.104
addnode=45.32.237.47
addnode=84.17.23.44
addnode=209.205.122.194
addnode=184.22.237.24
addnode=95.82.212.179
addnode=107.175.56.135
addnode=188.226.189.36
addnode=80.56.160.22
addnode=77.78.5.147
addnode=165.227.237.199
addnode=103.75.191.120
addnode=159.89.13.212
addnode=80.208.224.85
addnode=31.168.214.160
addnode=213.87.151.132
addnode=46.4.120.126
addnode=144.217.85.81
addnode=188.226.192.178
addnode=188.226.176.158
addnode=130.180.211.109
addnode=213.108.170.185
addnode=185.4.43.90
addnode=13.84.50.207
addnode=188.0.175.96
addnode=84.23.38.100
addnode=46.33.98.29
addnode=185.84.188.45
addnode=2001:0:9d38:90d7:437:2238:82e4:d30b
addnode=2600:6c40:5a00:3a85:6cfc:8155:2293:b26b
addnode=195.168.42.58
addnode=109.86.76.216
addnode=2001:0:9d38:90d7:4da:1cc7:54fb:436
addnode=114.109.50.229
addnode=109.87.190.104
addnode=121.33.172.70
addnode=185.41.21.83
addnode=110.169.199.67
addnode=2001:0:9d38:90d7:1c6f:3233:d58d:42d2
addnode=92.248.128.3
addnode=178.122.191.25
addnode=2403:6200:8822:8363:dd5f:cee0:5156:5b59
addnode=145.129.59.165
addnode=94.130.219.86
addnode=171.7.58.24
addnode=92.37.21.163
addnode=31.163.204.72
addnode=37.115.153.170
addnode=176.118.43.90
addnode=115.79.5.135
addnode=46.219.212.106
addnode=98.144.133.118
addnode=2001:0:9d38:6ab8:c1b:3789:fda2:1bd7
addnode=98.27.250.84
addnode=46.8.112.46
addnode=2001:980:9e86:1:5466:9600:bd25:cbfa
addnode=178.140.211.93
addnode=205.200.158.131
addnode=81.24.214.150
addnode=73.153.91.201
addnode=46.191.132.128
addnode=178.63.104.7
addnode=210.195.31.179
addnode=85.29.233.40
addnode=207.148.1.46
addnode=213.14.82.119
addnode=75.130.156.33
addnode=46.236.159.87
addnode=122.155.165.14
addnode=81.23.169.253
addnode=81.200.218.78
addnode=95.189.101.19
addnode=78.46.40.59
addnode=109.235.67.203
addnode=67.205.194.242
addnode=188.6.168.185
addnode=24.0.211.161
addnode=99.203.16.209
addnode=109.86.153.52
addnode=195.201.58.150
addnode=202.29.56.231
addnode=84.40.120.3
addnode=2001:0:5ef5:79fb:2033:244b:e76d:ca65
addnode=176.36.178.169
addnode=45.117.76.13
addnode=85.95.178.201
addnode=114.109.117.6
addnode=223.206.73.149
addnode=80.162.18.253
addnode=112.200.99.129
addnode=178.161.192.140
addnode=218.255.160.1
addnode=213.87.146.59
addnode=13.250.114.59
addnode=2001:0:9d38:6ab8:c1e:20c:a102:8533
addnode=94.130.78.183
addnode=84.24.42.82
addnode=180.191.144.44
addnode=172.91.205.32
addnode=88.85.202.219
addnode=171.98.126.220
addnode=118.173.43.252
addnode=109.60.216.99
addnode=82.116.44.54
addnode=5.44.169.46
addnode=85.95.178.69
addnode=180.115.24.208
6 - Put your wallet back where it belongs
7 - Re-open Lizus-qt & it should sync now
I highly appreciate your steps for syncing wallet. It helps me to solve my wallet problem.
jr. member
Activity: 33
Merit: 1
-ANNOUNCEMENT- NEW LIZUS POOL offering 0% fees (for limited time, guaranteed low fees and transparency after!) - https://cryptopool.party - The Crypto Pool Party!



https://cryptopool.party

-Run by 100% full-time cypto entrepreneurs
-US based (Houston, TX DataCenter)
-Dedicated admins
-Total Transparency, NO HIDDEN FEES!
-Discord support server https://discord.gg/3VuQxbx
-Constant new coin additions and speculation additions.
-Solid server with 99.9% uptime and synchronous 1Gb/s line (adding backup servers as well)
-Custom firewall with DDOS/attack mitigation.
-YIIMP based no registration needed.


SIMPLY SPECIFY YOUR USER AS YOUR WALLET FOR THE COIN YOU'RE MINING and the port for the algo...

EXAMPLE FOR Lizus -


Code:
-o stratum+tcp://cryptopool.party:4933 -u (LIZUS WALLET ADDRESS).WORKER -p c=LIZ

Your default difficulty is set to 0.1, makes for a lot of rejected & duplicate shares, I changed it with "-p d=1" but just thought I'd let you know I think 1 or 2 would be a better default. Wink
legendary
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
-ANNOUNCEMENT- NEW LIZUS POOL offering 0% fees (for limited time, guaranteed low fees and transparency after!) - https://cryptopool.party - The Crypto Pool Party!



https://cryptopool.party

-Run by 100% full-time cypto entrepreneurs
-US based (Houston, TX DataCenter)
-Dedicated admins
-Total Transparency, NO HIDDEN FEES!
-Discord support server https://discord.gg/3VuQxbx
-Constant new coin additions and speculation additions.
-Solid server with 99.9% uptime and synchronous 1Gb/s line (adding backup servers as well)
-Custom firewall with DDOS/attack mitigation.
-YIIMP based no registration needed.


SIMPLY SPECIFY YOUR USER AS YOUR WALLET FOR THE COIN YOU'RE MINING and the port for the algo...

EXAMPLE FOR Lizus -


Code:
-o stratum+tcp://cryptopool.party:4933 -u (LIZUS WALLET ADDRESS).WORKER -p c=LIZ
Pages:
Jump to: