Pages:
Author

Topic: Hash-Kings Profit Switching / Custom Coin Miner 1.15.3.0 - page 4. (Read 7054 times)

sr. member
Activity: 450
Merit: 255
Thanks jamgd, Your ideas have been great.

I have to spend a few days with the family but conerd will be available in the discord.
member
Activity: 210
Merit: 10
My AMD miners keep resetting...lasts for 1 second then off one second then back, and so forth.

During, the pool name will show a pool and then says 'none' during the off times

Any suggestions?

BTW...it's all my amd rigs...5 of them.

Mostly rx 480's I think only one r9 290 (not currently overclocked)
running windows 10, have antivirus off and an exclusion to the hashking folder.

Blockchain driver is installed and I can run the miners fine using stand-alone miners

just updated to 1.13 and still same issue.

NVIDIA rigs work great!

I jumped on their discord (new link few posts up)  and the developers helped me fix the issue...It was continuously mining but the api was set too fast and since my mining rigs have a cheap processor (works great though) I lowered the miner api to every 10 seconds and it works great.

Big thanks to the devs on this...they jumped in within seconds on discord and even remotely checked (under supervision and although I was skeptical, I wouldn't hesitate to do this again with this team.) my system. Found the issue and within minutes I was mining.

I have a small mining operation (10 rigs) and they helped get half of them up within minutes other half (Nvidia) no issues. Highly recommend this team!

member
Activity: 210
Merit: 10
My AMD miners keep resetting...lasts for 1 second then off one second then back, and so forth.

During, the pool name will show a pool and then says 'none' during the off times

Any suggestions?

BTW...it's all my amd rigs...5 of them.

Mostly rx 480's I think only one r9 290 (not currently overclocked)
running windows 10, have antivirus off and an exclusion to the hashking folder.

Blockchain driver is installed and I can run the miners fine using stand-alone miners

just updated to 1.13 and still same issue.

NVIDIA rigs work great!
sr. member
Activity: 450
Merit: 255
Hash-Kings Miner Version 1.12.0.0 has been released
https://bitbucket.org/hashkings/releases/downloads/
Bug Fix for not properly averaging API calls (made the miner switch algo's to often)
sr. member
Activity: 450
Merit: 255
Hash-Kings Miner Version 1.11.0.0 has been released
https://bitbucket.org/hashkings/releases/downloads/
This is a bugfix release which includes other small updates.
sr. member
Activity: 450
Merit: 255
New simple tutorial Video made by our New lead Developer
https://youtu.be/AxxVeEC9vPk

Link to latest releases in the description.
sr. member
Activity: 450
Merit: 255
Versions older than 1.9.0.6 RC1 no longer have a working API latest downloads can be found in the development discord or
Current stable release AKA RC1
https://bitbucket.org/hashkings/releases/downloads/MiltiPool_Miner_1.9.0.6-RC1.zip
Latest stable nightly (large download as it has all miners inside the bundle)
https://bitbucket.org/hashkings/releases/downloads/
sr. member
Activity: 450
Merit: 255
I completely agree, but first I need to fix several bugs then i will get in touch with you to try and optimize for vega's.
jr. member
Activity: 148
Merit: 5
Hey Cryptominer, just ran across this switching service and I've found it quite interesting!

I noticed it's not well optimized for Vega cards... I have quite a few of different types.

Would be happy to work with you to optimize for them if you'd like.

We're getting to a point where profit switching for Vega is starting to make sense...

For a 64: 64MH/s on MKX for Lyra2Rev2, 2000 H/s on Cast for XMR, 2.1-2.4 MH/s on Claymore for Neoscrypt, ~500 Sol/s on Claymore for Equihash, as well as 42-45 MH/s on Phoenix/Claymore for Dagger.

These are all fairly competitive algorithms to run on a Vega (although Cryptonight still dominates, but is dropping by the day bc of the ASICs), depending on the day/power cost, as some of them are pretty power hungry.

I could see there being demand in this area!
sr. member
Activity: 450
Merit: 255
Update we have just updated the A records to point to conerd's 1&1 server as they claim to be able to handle the load for at least 48 hours which should give us time to get the new dedicated server setup and running.
sr. member
Activity: 450
Merit: 255
At this time we are asking that you do everything that you can to prevent restarting your miners as our current webhost is refusing to unblock over 50% of our users IP addresses, we ordered a dedicated server over the weekend but it has not been provisioned just yet. We expect it to be available in another day or 2 but until then there is only a little that we can do, I am working with conerd to come up with a temporary solution but he has to ask his current webhost a few questions first.
sr. member
Activity: 450
Merit: 255
He did find a bug and let me know it should be fixed now.
sr. member
Activity: 450
Merit: 255
Another issue i found is the miner keeps relaunching the same algo it was already mining. Even when that is the only algo activated.

My API guy is taking a look to see if he can find the cause.
newbie
Activity: 30
Merit: 0
Another issue i found is the miner keeps relaunching the same algo it was already mining. Even when that is the only algo activated.
sr. member
Activity: 450
Merit: 255
discord link is no more valid, is there a new one?


https://discord.gg/9PxxzHT
sr. member
Activity: 450
Merit: 255
zpool is most profitable for nvidia almost all the time, amd will some times switch to MPH for ethash(Daggerhashimoto) or cryptonight.

I will be leaving for vacation tonight for a week to a week and a half, we do have support still available in the discord provided by conerd.
newbie
Activity: 30
Merit: 0
Been using the 1906 RC1 for over a day now, i have activated zpool and mph, confirmed that its mining to both pools when only selecting one, but haven't seen it mine to anything but zpool. Is there always a more profitable coin on zpool than mph (according to the software calculations)?
Or is the miner currently only mining at zpool but has the ability to mine to different pools via selection in settings?

Also would be awesome to be able to select all and deselect all algo checkboxes ( for times when wanting to mine only 1 algo or to test etc) instead of having to check and uncheck each algo individually.
sr. member
Activity: 450
Merit: 255
Something that would be cool to see is a central interface online, that will report total hashrate for all rigs and see which ones are online or offline.

This is in the plans and my phpguy is already working on it.

Okay i dont get it why Equihash algo is giving me 10% less sols then previous ver. Ive used 100% power on my cards and on all miners the 10% is there Sad
Edit* - Not only equihash. Ethhash algo like 20% less hashrate. Dunno something is wrong here.

This is because the latest versions remove 10% from all estimates in order to better account for pool fees in the estimated earnings.
newbie
Activity: 21
Merit: 0
Okay i dont get it why Equihash algo is giving me 10% less sols then previous ver. Ive used 100% power on my cards and on all miners the 10% is there Sad
Edit* - Not only equihash. Ethhash algo like 20% less hashrate. Dunno something is wrong here.
newbie
Activity: 39
Merit: 0
Something that would be cool to see is a central interface online, that will report total hashrate for all rigs and see which ones are online or offline.
Pages:
Jump to: