So this would be my only bot and the only thing hitting the API from me. As I can see updates rolling in I would assume it is not a full blacklisting, also orders work just fine so that also leads to not being blacklisted.
Also keep in mind this is Bittrex based.
I checked again today and I can see the data all over the place still. Some are 10 minutes behind, some are 5 minutes behind, some are 2 minutes, and some are less than 1 minute delay on the data.
Not an internal network issue, and not external (general connection) issues. Also viewing Bittrex directly (web site) is at full speed.
Let me know if there is additional things I can provide for debug.
I'll put this out there too in case someone is thinking hardware specs:
Lenovo Ideapad 310-15IKB
Intel I7-7500U @ 2.70GHz
8GB Ram
64-bit Windows 10
Topic: margin terminal - over 25 spot and futures exchanges! Bots and more - page 208. (Read 268864 times)
May 05, 2017, 12:37:43 PM
May 05, 2017, 11:06:44 AM
Can you try to call the API from the command line using wget or wget equivalent?
Code:
wget https://poloniex.com/public?command=returnCurrencies
What do you get?
This is the result:
http://imgur.com/a/XS0XP
it said "Forbidden"
Maybe the API blacklisted your IP? Did you access it with other trading bots? Or did you try to talk to it with own scripts?
It could resolve itself after some time (timeout). Can you try again over another connection?
May 05, 2017, 10:38:57 AM
Looking in the app running against Bittrex and I see there is quite a lag between where it thinks the market is and what the real time market is like. I figured there is going to be lag of some sorts, but I am seeing up to 10 minutes of difference between real time and the app.
What is the expected average lag the app was built around? Anyone else seeing this kind of delta?
I did notice that it is not the same delta on all markets, but my best one is averaged at 5 minutes of difference.
What is the expected average lag the app was built around? Anyone else seeing this kind of delta?
I did notice that it is not the same delta on all markets, but my best one is averaged at 5 minutes of difference.
10 minutes?? You mean seconds surely. We use the pull API and call every 2-9 seconds depending on the polling restrictions.
We will be moving to web sockets soon...
May 04, 2017, 07:23:00 PM
Looking in the app running against Bittrex and I see there is quite a lag between where it thinks the market is and what the real time market is like. I figured there is going to be lag of some sorts, but I am seeing up to 10 minutes of difference between real time and the app.
What is the expected average lag the app was built around? Anyone else seeing this kind of delta?
I did notice that it is not the same delta on all markets, but my best one is averaged at 5 minutes of difference.
What is the expected average lag the app was built around? Anyone else seeing this kind of delta?
I did notice that it is not the same delta on all markets, but my best one is averaged at 5 minutes of difference.
May 04, 2017, 05:29:29 PM
Didn't think about the CTRL+A, I will start doing that, but it would still be nice to have at least the typical "mark all read" button.
As for the other, yep that was a typo, you have it correct in your post.
New thoughts, is there a common bug/feature tracker that you have going public so we can see what all is being asked for and vote on it?
Also is there a work in progress list so we can see what to expect in the next release of the product?
Thanks
As for the other, yep that was a typo, you have it correct in your post.
New thoughts, is there a common bug/feature tracker that you have going public so we can see what all is being asked for and vote on it?
Also is there a work in progress list so we can see what to expect in the next release of the product?
Thanks
May 04, 2017, 04:44:41 PM
Hi there, loving the product. I had some requests to think about for the devs:
- Sounds (think this was mentioned before), having events trigger different sounds.
- Hyperlinks, would be nice to click to exchange web site, or directly to the page for the coin.
- On the notifications window, delete all and clear all. I get the ability to multi-select, but a all action button would be nice.
- For the wallet (all funds) window, when running on multiple monitors (all high DPI) and app is not on primary, the window renders off screen or partially off screen most of the time. (Windows 10)
- On the same subject, the status of the checkboxes on that screen should save state between sessions.
- Final note on that is that the window should remember last position and size on close, at least in the same session.
- Any type of running totals for the bots would be very nice to have.
Thanks for all your suggestions.
One of them is already possible
"On the notifications window, delete all and clear all. I get the ability to multi-select, but a all action button would be nice." - Click one row and then Ctrl A!
And this is remembered, right? "...window should remember last position and size on close, at least in the same session."
Best wishes,
Jonathan
May 04, 2017, 01:47:44 PM
Can I using leonArdo on Linux VPS, do I have to buy leonArdo core first?
If you want to use leonArdo you need to at least buy the single exchange version for $89.
You can then run it on a linux VPS. No bother!
Best wishes,
Jonathan
It's the same thing. You buy the software, it comes with the capacity for 1 exchange included. Then you can buy access to more exchanges, for $29 each. Or you buy the "Ultra" package which comes with all 7 exchanges available so far.
May 04, 2017, 01:31:34 PM
Can I using leonArdo on Linux VPS, do I have to buy leonArdo core first?
If you want to use leonArdo you need to at least buy the single exchange version for $89.
You can then run it on a linux VPS. No bother!
Best wishes,
Jonathan
May 04, 2017, 10:43:26 AM
Hi there, loving the product. I had some requests to think about for the devs:
- Sounds (think this was mentioned before), having events trigger different sounds.
- Hyperlinks, would be nice to click to exchange web site, or directly to the page for the coin.
- On the notifications window, delete all and clear all. I get the ability to multi-select, but a all action button would be nice.
- For the wallet (all funds) window, when running on multiple monitors (all high DPI) and app is not on primary, the window renders off screen or partially off screen most of the time. (Windows 10)
- On the same subject, the status of the checkboxes on that screen should save state between sessions.
- Final note on that is that the window should remember last position and size on close, at least in the same session.
- Any type of running totals for the bots would be very nice to have.
May 04, 2017, 09:46:20 AM
http://prntscr.com/f2qd4f
Why this is happening evrytime? Price increases, but buy order is not going up along with the strategy thresholds. Even when i try to drag and drop the order to the right place, after a certain time, leonArdo keeps placing it at the original price where i dragged it from. So i have to close the strategy and open a new one.
Is this a bug? or is there any settings i have to adjust?
Thnx.
Why this is happening evrytime? Price increases, but buy order is not going up along with the strategy thresholds. Even when i try to drag and drop the order to the right place, after a certain time, leonArdo keeps placing it at the original price where i dragged it from. So i have to close the strategy and open a new one.
Is this a bug? or is there any settings i have to adjust?
Thnx.
That's because it would have to make a bad trade to continue. You set that up under Min Effective Gain. If you make that a minus number (I use -5 or -1) it'll allow the program to continue. Otherwise it can't until the price comes back to that point.
The idea is that you allow it to make a bad trade occasionally to allow it to continue trading and (hopefully) make more money than you lost in the trade.
Exactly right. Thanks again akeetlebeetle.
Is it clear leomedina01? Let me know if you have any other questions.
Best wishes,
Jonathan
"make more money than you lost in the trade"?? I think you did not get my point. There's no money lost. I'm refering to a limit buy order (which wasn't filled yet) which was created in a lower price level, but market now has rose, however the buy limit order did not follow up the new strategy margins (which now is a higher price level), in my opnion the buy order should be replaced automatically with one with a higher price (inside the strategy margins) but that's not happening. Pls look at the screenshot > http://prntscr.com/f2qd4f
Hi leomedina01,
The reason is because the buy order is constrained by the previous sell order the bot made. Take a look at the image you sent on. I'm guessing you left the Min effective gain at 0% and therefore that's the highest price the buy order can get without breaking that rule.
If you want it to following the statistics higher, you need to set a negative Min Effective gain value.
Best wishes,
Jonathan
Ok. Thnx for your explanations. Btw, leonArdo is still with the problem of stopping the strategy alone...
I also had a similar issue. Looking into the logs, the cause of it was that it couldn't place the order, so the bot stopped. And the reason why it couldn't place the order was that the buy (or sell) order was of a tiny amount higher than the funds available - so the exchange obviously refused it. The solution for it was to start the bot with a bit less than all the funds. Annoying to do that manually, but that's a workaround. (And for leonArdo's side, the solution would be to make the order with 99.9% or possibly 99.95% (calculations needed to confirm that) of the amount, and not 100%.)
May 04, 2017, 08:48:15 AM
http://prntscr.com/f2qd4f
Why this is happening evrytime? Price increases, but buy order is not going up along with the strategy thresholds. Even when i try to drag and drop the order to the right place, after a certain time, leonArdo keeps placing it at the original price where i dragged it from. So i have to close the strategy and open a new one.
Is this a bug? or is there any settings i have to adjust?
Thnx.
Why this is happening evrytime? Price increases, but buy order is not going up along with the strategy thresholds. Even when i try to drag and drop the order to the right place, after a certain time, leonArdo keeps placing it at the original price where i dragged it from. So i have to close the strategy and open a new one.
Is this a bug? or is there any settings i have to adjust?
Thnx.
That's because it would have to make a bad trade to continue. You set that up under Min Effective Gain. If you make that a minus number (I use -5 or -1) it'll allow the program to continue. Otherwise it can't until the price comes back to that point.
The idea is that you allow it to make a bad trade occasionally to allow it to continue trading and (hopefully) make more money than you lost in the trade.
Exactly right. Thanks again akeetlebeetle.
Is it clear leomedina01? Let me know if you have any other questions.
Best wishes,
Jonathan
"make more money than you lost in the trade"?? I think you did not get my point. There's no money lost. I'm refering to a limit buy order (which wasn't filled yet) which was created in a lower price level, but market now has rose, however the buy limit order did not follow up the new strategy margins (which now is a higher price level), in my opnion the buy order should be replaced automatically with one with a higher price (inside the strategy margins) but that's not happening. Pls look at the screenshot > http://prntscr.com/f2qd4f
Hi leomedina01,
The reason is because the buy order is constrained by the previous sell order the bot made. Take a look at the image you sent on. I'm guessing you left the Min effective gain at 0% and therefore that's the highest price the buy order can get without breaking that rule.
If you want it to following the statistics higher, you need to set a negative Min Effective gain value.
Best wishes,
Jonathan
Ok. Thnx for your explanations. Btw, leonArdo is still with the problem of stopping the strategy alone...
May 04, 2017, 06:12:48 AM
So is there a ETA on custom indicator trading?
It is a really big piece of work and there are many other things we need to do first.
I would guestimate towards the end of the year...
May 04, 2017, 05:34:16 AM
So is there a ETA on custom indicator trading?
May 03, 2017, 09:01:31 PM
Can you try to call the API from the command line using wget or wget equivalent?
Code:
wget https://poloniex.com/public?command=returnCurrencies
What do you get?
This is the result:
http://imgur.com/a/XS0XP
it said "Forbidden"
May 03, 2017, 04:50:37 PM
I know you guys must have a long list of requests, buy now. But one more to the list would be arbitration between the supported exchanges 
+1 for that one too!
May 03, 2017, 04:43:34 PM
are there plans to connect with the BitShares Decentralized Exchange?
And if yes, when?
And if yes, when?
Yes there are plans! But it is basically a matter of where to devote our dev power atm.
Additionally we are not completely sure how big the demand for a leonArdo BTS version would be.
xeroc is also working on a Poloniex compatibility mode, which would make an integration easier.
We are happy to talk details via pm or telegram.
May 03, 2017, 03:08:42 PM
are there plans to connect with the BitShares Decentralized Exchange?
And if yes, when?
And if yes, when?
Yes there are plans! But it is basically a matter of where to devote our dev power atm.
Additionally we are not completely sure how big the demand for a leonArdo BTS version would be.
xeroc is also working on a Poloniex compatibility mode, which would make an integration easier.
We are happy to talk details via pm or telegram.
May 03, 2017, 02:12:00 PM
Hi Jonathan,
are there plans to connect with the BitShares Decentralized Exchange?
And if yes, when?
Best regards
are there plans to connect with the BitShares Decentralized Exchange?
And if yes, when?
Best regards
May 03, 2017, 01:47:56 PM
Hello,
First time looking at a Trading GUI/Bot, and LeonArdo looks intriguing. My only concern is that the Video's listed below don't have the same graphical appearance as the version I downloaded (3.3.x) does. I'm not able to move the graph for "historical" trading (learning).
Is this a limitation of the Demo, or are is there a manual/step-by-step tutorial that is newer? I would like to automate some of the altcoins I have on Polo, but I need a better understanding of the features that's available since the video is different.
Can you point me in the right direction? I'd like a simple 24 hour trading history for a buy/sell strategy with a easy +.10% profit over and above the fees. The video tutorial makes it look simple, but there's no drag/drop feature I can find. ??
Thanks for the help!
K
First time looking at a Trading GUI/Bot, and LeonArdo looks intriguing. My only concern is that the Video's listed below don't have the same graphical appearance as the version I downloaded (3.3.x) does. I'm not able to move the graph for "historical" trading (learning).
Is this a limitation of the Demo, or are is there a manual/step-by-step tutorial that is newer? I would like to automate some of the altcoins I have on Polo, but I need a better understanding of the features that's available since the video is different.
Can you point me in the right direction? I'd like a simple 24 hour trading history for a buy/sell strategy with a easy +.10% profit over and above the fees. The video tutorial makes it look simple, but there's no drag/drop feature I can find. ??
Thanks for the help!
K
Hi kalric,
Thanks for your interest in leonArdo!
The appearance changed because we introduced a dark skin and also standardized the look and feel across all platforms.
You can move the chart by right clicking in the graph and dragging left to reveal the price aligned depth chart and right to move back through time. The time overview can be adapted by clicking the buttons at the top of the graph.
The drag and drop feature refers to active orders. You can click an active order and move it to another price or simply move into the opposing order book to ensure it goes through immediately as a spot order
Let me know if you have any more questions.
Best wishes,
Jonathan
May 03, 2017, 01:40:33 PM
Can I using leonArdo on Linux VPS, do I have to buy leonArdo core first?
If you want to use leonArdo you need to at least buy the single exchange version for $89.
You can then run it on a linux VPS. No bother!
Best wishes,
Jonathan
Jump to: