margin terminal - over 25 spot and futures exchanges! Bots and more - page 72.

rst1

newbie

Activity: 2

Merit: 0

Quote from: Olider on January 20, 2018, 10:11:43 AM

https://leonardough-slack.herokuapp.com

There you go.

Many thanks, worked perfectly :-)

money4good

jr. member

Activity: 56

Merit: 1

Quote from: lodcomm on January 20, 2018, 12:15:38 PM

Quote from: CTShaman on January 19, 2018, 10:40:50 PM

Quote from: lodcomm on January 19, 2018, 11:12:44 AM

Quote from: leonArdo@margin on January 19, 2018, 06:11:39 AM

Quote from: money4good on January 18, 2018, 09:12:00 AM

Quote from: lodcomm on January 18, 2018, 09:03:47 AM

Greetings folks,

I am running the latest release of the bot on bittrex exchange.

I cannot seem to get the bollinger band strategy to work with any kind of logic whatsoever, hopefully someone can give me a few pointers on what I am doing wrong. I set up a Strategy on a pair using basically the defaults & band 2 on the bollinger band strategy.. The first trade appeared to follow the trading logic of buying at the dip (on the lower band) and selling at a peak.. I made no changes to the running strategy, and after the first initial buy low/sell high pair, the bot began trading 100% opposite and buying high & selling low? on another occasion, the bot makes the buy on the "buy" band, but then proceeds to execute a sell (at a loss of course!) on some random point no-where near the sell line? I have the min effective gain set to .10 - this parameter is clearly being ignored? Can anyone give some Ideas on what I am doing wrong here?

Here are some screenshots of the bizarre trading patterns.

http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-15%20at%206.35.33%20PM_zpshetbufxx.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.24.25%20AM_zpsf8ir34mi.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.21.03%20AM_zps3iudbzh3.png

thanks

Only time I’ve seen this on Poloniex is when you’ve stopped the bot at some point between a buy/sell cycle. If I set it and let it run it never sells for a loss on my end. If it’s doing this and you’re NOT stopping the bot then it must be a bug or something screwy with Bittrex...

This looks very strange indeed. There could be other reasons like starting/stopping or multiple strategies.
Can you send the logs to [email protected] and we will have a look!

All the best,

Rene

Hi Rene (& Money4good) -

Thanks for the feedback - I am reasonably sure that I stopped and restarted the running BB Bot in those situations. I have restarted a BB bot using some of the parameters suggested by a user here (like 12H time frame with 4.00% relative buy/sell gains and will not stop the running bot if it has executed any trade.

one other quick question, I have looked through what docs I have ancdcannot figure out what the "Go for it!" radio button does?

thanks

-t

@lodcomm

The "Go for it!" radio button allows the bot to act more aggressively when the API stops communicating correctly.
I used to have it on all the time but with increased demand on Bittrex their API become sluggish and error prone, so it is disabled on all bots at the moment. My reason for it is because I was getting double and triple buys that I did not want. Probably is no longer a problem since they beefed up infrastructure and volume at Bittrex and Poloniex has fizzled to a drizzle. -I am also entertaining the idea of expanding to other exchanges.

CTShaman - thanks for the explanation on the go for it..

Another question regarding the BB Strategy... If I execute a "Force Sell Now" - will that cause the same or similar confusion as stopping the running bot?

The “Force Sell/Buy now” buttons do not stop the bot. It will simply execute the order and then begin looking for sell or buy signal again.

CTShaman

jr. member

Activity: 253

Merit: 4

Quote from: Olider on January 20, 2018, 10:11:43 AM

Quote from: rst1 on January 20, 2018, 04:34:03 AM

Hi,

Quote from: CTShaman on January 19, 2018, 12:13:05 PM

Try https://leonardough.slack.com/

Looks like there is some invitation needed, does anyone here have one for me?

Thanks.

https://leonardough-slack.herokuapp.com

There you go.

@Olider thanks for pointing that out, it has been a while and I keep forgetting. Thanks!

Amaralluis

member

Activity: 132

Merit: 10

01/20 02:34:39 pm bittrex:BTG/BTC: http error during chart data get call: [code: 4]: Timeout (the connection to the remote server timed out)
01/20 02:34:48 pm bittrex:BTG/BTC: [Method:public/getorderbook (params: &type=sell) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)
01/20 02:34:51 pm bittrex:BTG/BTC: [Method:market/getopenorders (params: ) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)
01/20 02:34:58 pm bittrex: [Method:account/getbalances (params: ) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)
01/20 02:35:15 pm bittrex:BTG/BTC: ticker data update failed (http error while getting ticker: [code: 4]: Timeout (the connection to the remote server timed out))
01/20 02:35:18 pm bittrex:BTG/BTC: [Method:public/getorderbook (params: &type=sell) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 2 of 10)
01/20 02:35:40 pm bittrex:BTG/BTC: http error during chart data get call: [code: 4]: Timeout (the connection to the remote server timed out)
01/20 02:35:52 pm bittrex:BTG/BTC: [Method:public/getorderbook (params: &type=buy) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)
01/20 02:36:22 pm bittrex: [Method:account/getbalances (params: ) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)

I keep getting this error all the time in all pairs.
Whats the problem? Leonardo? Bitttrex?

RiSK6

newbie

Activity: 3

Merit: 0

Hi,
I am having trouble getting the Raspberry Pi version running on Raspbian.

This is the error I get when trying to run LeonArdo on Pi:

running on Raspbian
./leonardo.arm: relocation error: /lib/arm-linux-gnueabihf/libpthread.so.0: symbol h_errno,version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference

I followed these instructions:

sudo apt-get install libqt5websockets5
sudo apt-get install qt5-svg
wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xz
tar xvJf leonArdo-arm.tar.xz
cd leonArdo-arm/
./run-leonArdo.sh

Any help would be greatly appreciated.
BTW: The mac version is solid as a rock!!
Thanks LeonArdo Team!

hackbyte

copper member

Activity: 282

Merit: 111

Doing cryptocurrency stuff since 2010.

'Minor Bugs' in leonArdo-linux-3.7.8-b12079648

On bitfinex, whilst having a MarginMaker on SPK/BTC leonArdo failed to recognize new values in the wallet after a buy order got filled. - MEH

On bittrex, i'm no longer able to see my past orders....

Why, oh why is it that every little bit of change always brings new problems?

*meh*

Hacky

Edit[/i]: It seems that bittrex actually changed it's api in some ways, i cant set up any orders, i can't see any active or filled orders and i don't get the correct values of my wallets.... so, it's actually completely broken. Even with leonArdo 3.7.7.......

lodcomm

newbie

Activity: 11

Merit: 0

Quote from: CTShaman on January 19, 2018, 10:40:50 PM

Quote from: lodcomm on January 19, 2018, 11:12:44 AM

Quote from: leonArdo@margin on January 19, 2018, 06:11:39 AM

Quote from: money4good on January 18, 2018, 09:12:00 AM

Quote from: lodcomm on January 18, 2018, 09:03:47 AM

Greetings folks,

I am running the latest release of the bot on bittrex exchange.

I cannot seem to get the bollinger band strategy to work with any kind of logic whatsoever, hopefully someone can give me a few pointers on what I am doing wrong. I set up a Strategy on a pair using basically the defaults & band 2 on the bollinger band strategy.. The first trade appeared to follow the trading logic of buying at the dip (on the lower band) and selling at a peak.. I made no changes to the running strategy, and after the first initial buy low/sell high pair, the bot began trading 100% opposite and buying high & selling low? on another occasion, the bot makes the buy on the "buy" band, but then proceeds to execute a sell (at a loss of course!) on some random point no-where near the sell line? I have the min effective gain set to .10 - this parameter is clearly being ignored? Can anyone give some Ideas on what I am doing wrong here?

Here are some screenshots of the bizarre trading patterns.

http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-15%20at%206.35.33%20PM_zpshetbufxx.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.24.25%20AM_zpsf8ir34mi.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.21.03%20AM_zps3iudbzh3.png

thanks

Only time I’ve seen this on Poloniex is when you’ve stopped the bot at some point between a buy/sell cycle. If I set it and let it run it never sells for a loss on my end. If it’s doing this and you’re NOT stopping the bot then it must be a bug or something screwy with Bittrex...

This looks very strange indeed. There could be other reasons like starting/stopping or multiple strategies.
Can you send the logs to [email protected] and we will have a look!

All the best,

Rene

Hi Rene (& Money4good) -

Thanks for the feedback - I am reasonably sure that I stopped and restarted the running BB Bot in those situations. I have restarted a BB bot using some of the parameters suggested by a user here (like 12H time frame with 4.00% relative buy/sell gains and will not stop the running bot if it has executed any trade.

one other quick question, I have looked through what docs I have ancdcannot figure out what the "Go for it!" radio button does?

thanks

-t

@lodcomm

The "Go for it!" radio button allows the bot to act more aggressively when the API stops communicating correctly.
I used to have it on all the time but with increased demand on Bittrex their API become sluggish and error prone, so it is disabled on all bots at the moment. My reason for it is because I was getting double and triple buys that I did not want. Probably is no longer a problem since they beefed up infrastructure and volume at Bittrex and Poloniex has fizzled to a drizzle. -I am also entertaining the idea of expanding to other exchanges.

CTShaman - thanks for the explanation on the go for it..

Another question regarding the BB Strategy... If I execute a "Force Sell Now" - will that cause the same or similar confusion as stopping the running bot?

Olider

newbie

Activity: 1

Merit: 0

Quote from: rst1 on January 20, 2018, 04:34:03 AM

Hi,

Quote from: CTShaman on January 19, 2018, 12:13:05 PM

Try https://leonardough.slack.com/

Looks like there is some invitation needed, does anyone here have one for me?

Thanks.

https://leonardough-slack.herokuapp.com

There you go.

DarthKegRaider

newbie

Activity: 20

Merit: 0

Quote from: gnoe on January 20, 2018, 02:15:54 AM

Is the leoNardo Arm version for Raspberry, only 32bit or both 32/64bit ?

Not sure it would matter all that much with the limited RAM on the Pi anyway?

rst1

newbie

Activity: 2

Merit: 0

Hi,

Quote from: CTShaman on January 19, 2018, 12:13:05 PM

Try https://leonardough.slack.com/

Looks like there is some invitation needed, does anyone here have one for me?

Thanks.

gnoe

newbie

Activity: 61

Merit: 0

Is the leoNardo Arm version for Raspberry, only 32bit or both 32/64bit ?

CTShaman

jr. member

Activity: 253

Merit: 4

Quote from: lodcomm on January 19, 2018, 11:12:44 AM

Quote from: leonArdo@margin on January 19, 2018, 06:11:39 AM

Quote from: money4good on January 18, 2018, 09:12:00 AM

Quote from: lodcomm on January 18, 2018, 09:03:47 AM

Greetings folks,

I am running the latest release of the bot on bittrex exchange.

I cannot seem to get the bollinger band strategy to work with any kind of logic whatsoever, hopefully someone can give me a few pointers on what I am doing wrong. I set up a Strategy on a pair using basically the defaults & band 2 on the bollinger band strategy.. The first trade appeared to follow the trading logic of buying at the dip (on the lower band) and selling at a peak.. I made no changes to the running strategy, and after the first initial buy low/sell high pair, the bot began trading 100% opposite and buying high & selling low? on another occasion, the bot makes the buy on the "buy" band, but then proceeds to execute a sell (at a loss of course!) on some random point no-where near the sell line? I have the min effective gain set to .10 - this parameter is clearly being ignored? Can anyone give some Ideas on what I am doing wrong here?

Here are some screenshots of the bizarre trading patterns.

http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-15%20at%206.35.33%20PM_zpshetbufxx.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.24.25%20AM_zpsf8ir34mi.png
http://i1089.photobucket.com/albums/i344/lodcomm/Screen%20Shot%202018-01-18%20at%208.21.03%20AM_zps3iudbzh3.png

thanks

Only time I’ve seen this on Poloniex is when you’ve stopped the bot at some point between a buy/sell cycle. If I set it and let it run it never sells for a loss on my end. If it’s doing this and you’re NOT stopping the bot then it must be a bug or something screwy with Bittrex...

This looks very strange indeed. There could be other reasons like starting/stopping or multiple strategies.
Can you send the logs to [email protected] and we will have a look!

All the best,

Rene

Hi Rene (& Money4good) -

Thanks for the feedback - I am reasonably sure that I stopped and restarted the running BB Bot in those situations. I have restarted a BB bot using some of the parameters suggested by a user here (like 12H time frame with 4.00% relative buy/sell gains and will not stop the running bot if it has executed any trade.

one other quick question, I have looked through what docs I have ancdcannot figure out what the "Go for it!" radio button does?

thanks

-t

@lodcomm

The "Go for it!" radio button allows the bot to act more aggressively when the API stops communicating correctly.
I used to have it on all the time but with increased demand on Bittrex their API become sluggish and error prone, so it is disabled on all bots at the moment. My reason for it is because I was getting double and triple buys that I did not want. Probably is no longer a problem since they beefed up infrastructure and volume at Bittrex and Poloniex has fizzled to a drizzle. -I am also entertaining the idea of expanding to other exchanges.

Amaralluis

member

Activity: 132

Merit: 10

I am getting alot of these errors with the latest version :

01/19 11:03:32 pm bittrex: [Method:account/getbalances (params: ) ] error in DefaultMarketInterface::httpPOST: network error: [code: 4]: Timeout (the connection to the remote server timed out) (try 1 of 10)

I dont know what impact it has on the BB bot.

hackbyte

copper member

Activity: 282

Merit: 111

Doing cryptocurrency stuff since 2010.

Quote from: money4good on January 19, 2018, 03:09:28 PM

Not sure if any other Raspberry Pi users have noticed this but sometimes when I close a coin pair it closes the whole program instead of just that tab...Not every time but it has happened twice in last 24 hrs. Not sure if it’s a big or a communication problem with VNC viewer.

Hehehe .... happens to the normal linux version too ... last time i had this (some few hours ago) it just froze the program and i had to kill it myself to get rid of it....

Right now i'm writing some weird bash hack to have a wrapper around it which shall write any output from leonardo to separate logfiles so i can collect them and send them to the support team.

I wish we at least had a commandline option to tell leonArdo which actual exchange to open right from the start on, skipping this login dialog.

This way, i can just set up four differen instances of this wrapper, which each just restarts leonardo after a crash w/o long delays....

Well ... some time......... who knows...

Hacky Wink

money4good

jr. member

Activity: 56

Merit: 1

Quote from: Grumble Guff on January 19, 2018, 03:40:42 PM

Quote from: money4good on January 19, 2018, 03:09:28 PM

Not sure if any other Raspberry Pi users have noticed this but sometimes when I close a coin pair it closes the whole program instead of just that tab...Not every time but it has happened twice in last 24 hrs. Not sure if it’s a big or a communication problem with VNC viewer.

Yeah, it's annoying. The trick is to not close the tab that is currently open

Gotcha. Thanks.

Ghostkai

newbie

Activity: 26

Merit: 0

Quote from: leonArdo@margin on January 19, 2018, 10:31:36 AM

Update patch version 3.7.8 available

This patch should make leonArdo more stable.

Fixed four sources of potential program crashes:

Order Association issue in strategies, causing runtime_error
Bad Websocket server results causing future_error: Broken promise (relevant for Bitfinex & HitBTC)
Bad handling of http errors in fund queries, causing a std::runtime_error
Bad handling of open orders request errors

Reduced spot order buy price max to 1.2*current price. This in particular makes spot orders on Bittrex more stable.

Click on the "update available!" link on the leonArdo login screen to download this new version.

Jonathan

Thanks! Updated to the new version without any issues.

gnoe

newbie

Activity: 61

Merit: 0

Quote from: Grumble Guff on January 19, 2018, 03:40:42 PM

Quote from: money4good on January 19, 2018, 03:09:28 PM

Not sure if any other Raspberry Pi users have noticed this but sometimes when I close a coin pair it closes the whole program instead of just that tab...Not every time but it has happened twice in last 24 hrs. Not sure if it’s a big or a communication problem with VNC viewer.

Yeah, it's annoying. The trick is to not close the tab that is currently open

Happened to me too. I'll follow your tip next time. Wink

Grumble Guff

newbie

Activity: 19

Merit: 0

Quote from: money4good on January 19, 2018, 03:09:28 PM

Not sure if any other Raspberry Pi users have noticed this but sometimes when I close a coin pair it closes the whole program instead of just that tab...Not every time but it has happened twice in last 24 hrs. Not sure if it’s a big or a communication problem with VNC viewer.

Yeah, it's annoying. The trick is to not close the tab that is currently open

money4good

jr. member

Activity: 56

Merit: 1

Not sure if any other Raspberry Pi users have noticed this but sometimes when I close a coin pair it closes the whole program instead of just that tab...Not every time but it has happened twice in last 24 hrs. Not sure if it’s a big or a communication problem with VNC viewer.

proce55or

newbie

Activity: 34

Merit: 0

Quote from: CTShaman on January 19, 2018, 12:13:05 PM

Try https://leonardough.slack.com/
They were hashing it out last week and earlier this week, it got fairly deep and the guys were introspective, this may be your best bet. "Shared experience" might save you some coin ramping up.

Any invitation link, please?

Topic: margin terminal - over 25 spot and futures exchanges! Bots and more - page 72. (Read 268900 times)