MaxCoin | CPU Cloud Mining Guide | MAX VPS // has been LAUNCHED@6.2/7:30 GMT - page 14.

zpply

member

Activity: 62

Merit: 10

Quote from: instacalm on February 06, 2014, 05:32:30 PM

Quote from: zpply on February 06, 2014, 05:28:43 PM

Quote from: instacalm on February 06, 2014, 05:19:56 PM

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

If you solo mine you can only find 1 block at a time which for MaxCoin is 96 coins. Due to the difficulty of currently ~200 it is really hard to find blocks solo.

POOLS are absolutely required now and we should look out for them.

PS. I have only 1 Block, 96 coins.

What is the command to check if you have found a block?

If you catch a block you can see it under "balance" : 0.00000000,

Please note that due to the high difficulty it is really hard to solomine now and hence takes a long time to find a block. Please watch out for pools and switch over to pool mining as soon as possible.

Sorry for inconvenience, I hope you're all doing well!

ok, thanks - nothing so far .... hoping for a pool to be up soon.

AspireMining

newbie

Activity: 23

Merit: 0

Quote from: instacalm on February 06, 2014, 05:23:30 PM

Quote from: AspireMining on February 06, 2014, 05:20:46 PM

Still sitting at "connections" 0

HALP!

Seriously about to start pulling my hair out. This is one of the most frustrating things I've tried to do in my life. Appreciate all the help instacash

AspireMining, I am extremely sorry for this and I am completely stressed out as well. My droplets do have connections now so I am beginning to calm down.

Have you added all the nodes posted in the thread to your config? If so, did you double check whether you saved the config with those nodes? If you have them added, properly killed and relaunched maxcoind, it has to work! The network is apparently indeed under heavy load atm.

My 3 droplets:
1. "connections" : 29,
2. "connections" : 34,
3. "connections" : 16,

Well after doing the process 3 times over to make sure it was done right. Still didn't work.

I logged out of putty and started a new SSH session. Followed the steps and now I'm sitting at a mighty "1" connections. Although it keeps loosing connection and keeps going back to "0"

instacalm

hero member

Activity: 798

Merit: 500

Quote from: zpply on February 06, 2014, 05:28:43 PM

Quote from: instacalm on February 06, 2014, 05:19:56 PM

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

If you solo mine you can only find 1 block at a time which for MaxCoin is 96 coins. Due to the difficulty of currently ~200 it is really hard to find blocks solo.

POOLS are absolutely required now and we should look out for them.

PS. I have only 1 Block, 96 coins.

What is the command to check if you have found a block?

If you catch a block you can see it under "balance" : 0.00000000,

Please note that due to the high difficulty it is really hard to solomine now and hence takes a long time to find a block. Please look out for pools and switch over to pool mining as soon as possible.

Sorry for any inconvenience caused, I hope you're all doing well!

zpply

member

Activity: 62

Merit: 10

Quote from: ddo on February 06, 2014, 05:28:33 PM

Stuck at

Code:

Every 2.0s: ./maxcoind getinfo && ./maxcoind getmin...  Thu Feb  6 22:26:01 2014

{
    "version" : 80900,
    "protocolversion" : 70001,
    "walletversion" : 60000,
    "balance" : 0.00000000,
    "blocks" : 0,
    "timeoffset" : 0,
    "connections" : 0,
    "proxy" : "",
    "difficulty" : 0.00390625,
    "testnet" : false,
    "keypoololdest" : 1391725272,
    "keypoolsize" : 101,
    "paytxfee" : 0.00000000,
    "errors" : ""
}
{



    "blocks" : 0,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "difficulty" : 0.00390625,
    "errors" : "",

What does this mean?

You should go back to here - https://bitcointalksearch.org/topic/m.4982489

zpply

member

Activity: 62

Merit: 10

Quote from: instacalm on February 06, 2014, 05:19:56 PM

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

If you solo mine you can only find 1 block at a time which for MaxCoin is 96 coins. Due to the difficulty of currently ~200 it is really hard to find blocks solo.

POOLS are absolutely required now and we should look out for them.

PS. I have only 1 Block, 96 coins.

What is the command to check if you have found a block?

ddo

newbie

Activity: 9

Merit: 0

Stuck at

Code:

Every 2.0s: ./maxcoind getinfo && ./maxcoind getmin...  Thu Feb  6 22:26:01 2014

{
    "version" : 80900,
    "protocolversion" : 70001,
    "walletversion" : 60000,
    "balance" : 0.00000000,
    "blocks" : 0,
    "timeoffset" : 0,
    "connections" : 0,
    "proxy" : "",
    "difficulty" : 0.00390625,
    "testnet" : false,
    "keypoololdest" : 1391725272,
    "keypoolsize" : 101,
    "paytxfee" : 0.00000000,
    "errors" : ""
}
{
    "blocks" : 0,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "difficulty" : 0.00390625,
    "errors" : "",

What does this mean?

primer-

legendary

Activity: 1092

Merit: 1000

Whats the burrent block ? Is it #320 ?

zpply

member

Activity: 62

Merit: 10

Quote from: ?? on ??

@ zpply what did you do next my connections changed from 0 to 1 but my blocks are still zero

however after "errors" : "",

im no longer able to type anything does that mean its working?

you should be good. You will see the data on the screen change. I'm seeing blocks 319

Snotty

full member

Activity: 238

Merit: 100

Quote from: instacalm on February 06, 2014, 05:19:56 PM

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

If you solo mine you can only find 1 block at a time which for MaxCoin is 96 coins. Due to the difficulty of currently ~200 it is really hard to find blocks solo.

POOLS are absolutely required now and we should look out for them.

PS. I have only 1 Block, 96 coins.

Refreshing this thread, because it's the only place, where information is represented in usable and clear way. You are awesome, Instacash. You really are.

ARE5

newbie

Activity: 7

Merit: 0

is there a working pool online?

NUFCrichard

legendary

Activity: 1218

Merit: 1003

I am trying to cloud mine
./minerd -a keccak -o 127.0.0.1:1925 -u maxcoinrpc -p my password

Here is my maxcoin.conf
# Seed nodes
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25

# Enable RPC
server=1

# RPC information
rpcuser=maxcoinrpc
rpcpassword=mypassword
rpcallowip=127.0.0.1
rpcport=1925

# Mining
gen=1

Any ideas why I can't connect? I always get a json_rpc_call failed, retry after 30 seconds error. I have tried everything I can think of, it usually works fine in a pool...

stratumsphere

newbie

Activity: 3

Merit: 0

Thank you so much instacash. I am up and running, you did a great job here. I am running with 11 connections. Also where can I check the hasrate that I am atm? Will ever find a block, if so how much time aproximately?
Again thanks a lot for all the hard work. I will send you some maxcoins for sure Wink

melfalcon

newbie

Activity: 12

Merit: 0

read the above - due to current difficulty this method is no longer valid

instacalm

hero member

Activity: 798

Merit: 500

Quote from: AspireMining on February 06, 2014, 05:20:46 PM

Still sitting at "connections" 0

HALP!

Seriously about to start pulling my hair out. This is one of the most frustrating things I've tried to do in my life. Appreciate all the help instacash

AspireMining, I am extremely sorry for this and I am completely stressed out as well. My droplets do have connections now... However, it frustrates me that they didn't come up with working pools at launch time as it was promised. I consider their launch to be chaotic.

Have you added all the nodes posted in the thread to your config? If so, did you double check whether you saved the config with those nodes? If you have them added, properly killed and relaunched maxcoind, it has to work! The network is apparently indeed under heavy load atm.

My 3 droplets:
1. "connections" : 29,
2. "connections" : 34,
3. "connections" : 16,

AspireMining

newbie

Activity: 23

Merit: 0

Still sitting at "connections" 0

HALP!

Seriously about to start pulling my hair out. This is one of the most frustrating things I've tried to do in my life. Appreciate all the help instacash

instacalm

hero member

Activity: 798

Merit: 500

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

If you solo mine you can only find 1 block at a time which for MaxCoin is 96 coins. Due to the difficulty of currently ~200 it is really hard to find blocks solo.

POOLS are absolutely required now and we should look out for them.

PS. I have only 1 Block, 96 coins.

Mtinie

newbie

Activity: 9

Merit: 0

Unless the maxcoind process is hiding, I'm not seeing it when I run:

Code:

ps x

Unfortunately, I'm still seeing the "error: couldn't connect to server" message.

Any advice?

deyvisonrocha

newbie

Activity: 3

Merit: 0

Quote from: melfalcon on February 06, 2014, 05:03:25 PM

Has anyone found so much as 1 coin via this method?

I also can not.

humorme201

newbie

Activity: 26

Merit: 0

the process is now where to be found...yet it still says trying to connect...any suggestions?

Prabhjot Lalli

member

Activity: 91

Merit: 10

Does anybody have a good pool?

Also, how do I change from single mining to a pool?

Thanks.

Topic: MaxCoin | CPU Cloud Mining Guide | MAX VPS // has been [email protected]/7:30 GMT - page 14. (Read 105704 times)